measure源码
public final void measure(int widthMeasureSpec, int heightMeasureSpec) {
//判断是否使用视觉边界布局
boolean optical = isLayoutModeOptical(this);
if (optical != isLayoutModeOptical(mParent)) {
Insets insets = getOpticalInsets();
int oWidth = insets.left + insets.right;
int oHeight = insets.top + insets.bottom;
widthMeasureSpec = MeasureSpec.adjust(widthMeasureSpec, optical ? -oWidth : oWidth);
heightMeasureSpec = MeasureSpec.adjust(heightMeasureSpec, optical ? -oHeight : oHeight);
}
// Suppress sign extension for the low bytes
//计算key值
long key = (long) widthMeasureSpec << 32 | (long) heightMeasureSpec & 0xffffffffL;
//mMeasureCache是LongSparseLongArray类型的成员变量，
//其缓存着View在不同widthMeasureSpec、heightMeasureSpec下量算过的结果
//如果mMeasureCache为空，我们就新new一个对象赋值给mMeasureCache
if (mMeasureCache == null)
mMeasureCache = new LongSparseLongArray(2);
//是否强制测量
final boolean forceLayout = (mPrivateFlags & PFLAG_FORCE_LAYOUT) == PFLAG_FORCE_LAYOUT;
// Optimize layout by avoiding an extra EXACTLY pass when the view is
// already measured as the correct size. In API 23 and below, this
// extra pass is required to make LinearLayout re-distribute weight.
//mOldWidthMeasureSpec和mOldHeightMeasureSpec分别表示上次对View进行量算时的widthMeasureSpec和heightMeasureSpec
//执行View的measure方法时，View总是先检查一下是不是真的有必要费很大力气去做真正的量算工作
final boolean specChanged = widthMeasureSpec != mOldWidthMeasureSpec
|| heightMeasureSpec != mOldHeightMeasureSpec;
//parent是否给定了精确的大小
final boolean isSpecExactly = MeasureSpec.getMode(widthMeasureSpec) == MeasureSpec.EXACTLY
&& MeasureSpec.getMode(heightMeasureSpec) == MeasureSpec.EXACTLY;
final boolean matchesSpecSize = getMeasuredWidth() == MeasureSpec.getSize(widthMeasureSpec)
&& getMeasuredHeight() == MeasureSpec.getSize(heightMeasureSpec);
final boolean needsLayout = specChanged
&& (sAlwaysRemeasureExactly || !isSpecExactly || !matchesSpecSize);
if (forceLayout || needsLayout) {
// first clears the measured dimension flag
//通过按位操作，重置View的状态mPrivateFlags，将其标记为未量算状态
mPrivateFlags &= ~PFLAG_MEASURED_DIMENSION_SET;
//对阿拉伯语、希伯来语等从右到左书写、布局的语言进行特殊处理
resolveRtlPropertiesIfNeeded();
//在View真正进行量算之前，View还想进一步确认能不能从已有的缓存mMeasureCache中读取缓存过的量算结果
//如果是强制layout导致的量算，那么将cacheIndex设置为-1，即不从缓存中读取量算结果
//如果不是强制layout导致的量算，那么我们就用上面根据measureSpec计算出来的key值作为缓存索引cacheIndex。
int cacheIndex = forceLayout ? -1 : mMeasureCache.indexOfKey(key);
if (cacheIndex < 0 || sIgnoreMeasureCache) {
// measure ourselves, this should set the measured dimension flag back
//如果运行到此处，表示我们没有从缓存中找到量算过的尺寸或者是sIgnoreMeasureCache为true导致我们要忽略缓存结果
//此处调用onMeasure方法，并把尺寸限制条件widthMeasureSpec和heightMeasureSpec传入进去
//onMeasure方法中将会进行实际的量算工作，并把量算的结果保存到成员变量中
onMeasure(widthMeasureSpec, heightMeasureSpec);
//onMeasure执行完后，通过位操作，重置View的状态mPrivateFlags，将其标记为在layout之前不必再进行量算的状态
mPrivateFlags3 &= ~PFLAG3_MEASURE_NEEDED_BEFORE_LAYOUT;
} else {
//onMeasure执行完后，通过位操作，重置View的状态mPrivateFlags，将其标记为在layout之前不必再进行量算的状态
long value = mMeasureCache.valueAt(cacheIndex);
// Casting a long to int drops the high 32 bits, no mask needed
//一旦我们从缓存中读到值，我们就可以调用setMeasuredDimensionRaw方法将当前量算的结果到成员变量中
setMeasuredDimensionRaw((int) (value >> 32), (int) value);
mPrivateFlags3 |= PFLAG3_MEASURE_NEEDED_BEFORE_LAYOUT;
}
// flag not set, setMeasuredDimension() was not invoked, we raise
// an exception to warn the developer
//如果我们自定义的View重写了onMeasure方法，但是没有调用setMeasuredDimension()方法，
//那么此处就会抛出异常，提醒开发者在onMeasure方法中调用setMeasuredDimension()方法
//Android是如何知道我们有没有在onMeasure方法中调用setMeasuredDimension()方法的呢？
//方法很简单，还是通过解析状态位mPrivateFlags。
//setMeasuredDimension()方法中会将mPrivateFlags设置为PFLAG_MEASURED_DIMENSION_SET状态，即已量算状态，
//此处就检查mPrivateFlags是否含有PFLAG_MEASURED_DIMENSION_SET状态即可判断setMeasuredDimension是否被调用
if ((mPrivateFlags & PFLAG_MEASURED_DIMENSION_SET) != PFLAG_MEASURED_DIMENSION_SET) {
throw new IllegalStateException("View with id " + getId() + ": "
+ getClass().getName() + "#onMeasure() did not set the"
+ " measured dimension by calling"
+ " setMeasuredDimension()");
}
mPrivateFlags |= PFLAG_LAYOUT_REQUIRED;
}
//mOldWidthMeasureSpec和mOldHeightMeasureSpec保存着最近一次量算时的MeasureSpec，
//在量算完成后将这次新传入的MeasureSpec赋值给它们
mOldWidthMeasureSpec = widthMeasureSpec;
mOldHeightMeasureSpec = heightMeasureSpec;
//最后用上面计算出的key作为键，量算结果作为值，将该键值对放入成员变量mMeasureCache中，
//这样就实现了对本次量算结果的缓存，以便在下次measure方法执行的时候，有可能将其从中直接读出，
//从而省去实际量算的步骤
mMeasureCache.put(key, ((long) mMeasuredWidth) << 32 |
(long) mMeasuredHeight & 0xffffffffL); // suppress sign extension
}
- 判断是否使用视觉边界布局，默认为否，如果使用，需要重新布局
- 根据widthMeasureSpec、heightMeasureSpec计算缓存key
- 判断是否需要重新计算尺寸
- specChanged，将当前widthMeasureSpec、heightMeasureSpec和旧的值比较。
- isSpecExactly，是否使用了精确大小布局
- forceLayout，mPrivateFlags & PFLAG_FORCE_LAYOUT。是否有强制布局标识
- 如果需要重新计算
- 去除PFLAG_MEASURED_DIMENSION_SET标识
- 获取缓存index
- 如果缓存index=-1或者已经标识忽略缓存，则重新计算
- onMeasure(widthMeasureSpec, heightMeasureSpec);
- 置View的状态mPrivateFlags，将其标记为在layout之前不必再进行量算的状态
- 如果有缓存并未标识忽略缓存则直接使用缓存尺寸setMeasuredDimensionRaw（）
- 判断PFLAG_MEASURED_DIMENSION_SET是否设置
- PFLAG_MEASURED_DIMENSION_SET在setMeasuredDimensionRaw（）方法中设置，所以onMeasure()方法中必须调用setMeasuredDimensionRaw方法
- 设置mOldWidthMeasureSpec、mOldHeightMeasureSpec并缓存尺寸
流程图：
st=>start: measure
cond=>condition: 是否使用视觉布局?
op_calc=>operation: 重新计算尺寸
op_gen_cache_key=>operation: 根据尺寸计算缓存key
cond_isLayout=>condition: 是否需要强制布局（与old尺寸比较||强制布局标识）
op_et_cache=>operation: 清除尺寸计算标示，获取缓存尺寸
cond_is_cache=>condition: 是否存在缓存||忽略缓存
op_on_measure=>operation: 计算并设置尺寸
op_use_cache=>operation: 使用缓存尺寸
cond_is_set_measure=>condition: 是否设置尺寸(setMeasuredDimensionRaw)
op_no_set_measuret=>operation: IllegalStateException
op_reset=>operation: 设置就尺寸，缓存尺寸
e=>end: 计算尺寸结束
st->cond->op
cond(no)->op_gen_cache_key
cond(yes)->op_calc
op_calc->op_gen_cache_key
op_gen_cache_key->cond_isLayout
cond_isLayout(yes)->op_et_cache
cond_isLayout(no)->op_reset
op_et_cache->cond_is_cache
cond_is_cache(no)->op_on_measure
cond_is_cache(yes)->op_use_cache
op_use_cache->cond_is_set_measure
op_on_measure->cond_is_set_measure
cond_is_set_measure(no)->op_no_set_measuret
cond_is_set_measure(yes)->op_reset
op_reset->e
