HostDailyCheck.sh

系统巡检脚本：Version 2016.08.09

############################ 系统检查 ############################
系统：GNU/Linux
发行版本：CentOS Linux release 7.2.1511 (Core)
内核：3.10.0-327.el7.x86_64
主机名：localhost.localdomain
SELinux：enabled
语言/编码：en_US.UTF-8
当前时间：2016-08-10 01:16:38
最后启动：2016-08-09 00:40
运行时间：1 day

############################ CPU检查 #############################
物理CPU个数:1
逻辑CPU个数:1
每CPU核心数:1
CPU型号:Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz
CPU架构:x86_64

############################ 内存检查 ############################
total used free shared buff/cache available
Mem: 1.9G 138M 343M 8.6M 1.5G 1.6G
Swap: 2.0G 0B 2.0G

############################ 磁盘检查 ############################
Filesystem Type | Size Used Avail Use% | Inodes IUsed IFree IUse% | Mounted
/dev/mapper/centos-root xfs | 18G 1.6G 16G 9% | 18M 24K 18M 1% | /
devtmpfs devtmpfs | 983M 0 983M 0% | 246K 381 246K 1% | /dev
tmpfs tmpfs | 993M 0 993M 0% | 249K 1 249K 1% | /dev/shm
tmpfs tmpfs | 993M 0 993M 0% | 249K 485 248K 1% | /run
tmpfs tmpfs | 993M 0 993M 0% | 249K 13 249K 1% | /sys/fs/cgroup
tmpfs tmpfs | 993M 8.6M 985M 1% | 249K 1 249K 1% | /dev/shm
tmpfs tmpfs | 993M 8.6M 985M 1% | 249K 485 248K 1% | /run
tmpfs tmpfs | 993M 8.6M 985M 1% | 249K 13 249K 1% | /sys/fs/cgroup
tmpfs tmpfs | 993M 0 993M 0% | 249K 1 249K 1% | /dev/shm
tmpfs tmpfs | 993M 0 993M 0% | 249K 485 248K 1% | /run
tmpfs tmpfs | 993M 0 993M 0% | 249K 13 249K 1% | /sys/fs/cgroup
/dev/sda1 xfs | 497M 107M 391M 22% | 500K 329 500K 1% | /boot
tmpfs tmpfs | 199M 0 199M 0% | 249K 1 249K 1% | /run/user/0
/dev/loop0 iso9660 | 603M 603M 0 100% | 0 0 0 - | /var/ftp/pub

############################ 网络检查 ############################
eno16777736: 192.168.100.63/24 192.168.100.68/24

网关：192.168.100.2
DNS：192.168.100.2

############################ 监听检查 ############################
Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port
udp UNCONN 0 0 *:14034 :
udp UNCONN 0 0 :46966 :
udp UNCONN 0 0 :67 :
udp UNCONN 0 0 :68 :
udp UNCONN 0 0 :69 :
udp UNCONN 0 0 :::46966 :::
udp UNCONN 0 0 :::32833 :::
tcp LISTEN 0 128 :22 :
tcp LISTEN 0 100 127.0.0.1:25 :
tcp LISTEN 0 32 :::21 :::
tcp LISTEN 0 128 :::22 :::
tcp LISTEN 0 100 ::1:25 :::

############################ 进程检查 ############################

内存占用TOP10

PID %MEM RSS COMMAND
10069 0.9 18612 /usr/sbin/dhcpd
1212 0.8 16396 /usr/bin/python
10036 0.7 15800 /sbin/dhclient
992 0.5 11992 /usr/lib/polkit-1/polkitd
962 0.4 8232 /usr/sbin/NetworkManager
1 0.3 7208 /usr/lib/systemd/systemd
969 0.2 5320 /usr/sbin/rsyslogd
10196 0.2 5076 sshd:
10175 0.2 5072 sshd:
810 0.2 4996 /usr/lib/systemd/systemd-journald

CPU占用TOP10

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
10638 root 20 0 146272 2164 1352 R 6.2 0.1 0:00.01 top
1 root 20 0 44496 7208 2612 S 0.0 0.4 0:03.83 systemd
2 root 20 0 0 0 0 S 0.0 0.0 0:00.04 kthreadd
3 root 20 0 0 0 0 S 0.0 0.0 0:00.67 ksoftirqd/0
7 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/0
8 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_bh
9 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcuob/0
10 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcuob/1
11 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcuob/2
12 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcuob/3

############################ 服务检查 ############################

服务配置

auditd.service enabled
crond.service enabled
dbus-org.freedesktop.NetworkManager.service enabled
dbus-org.freedesktop.nm-dispatcher.service enabled
dhcpd.service enabled
getty@.service enabled
irqbalance.service enabled
lvm2-monitor.service enabled
microcode.service enabled
NetworkManager-dispatcher.service enabled
NetworkManager.service enabled
postfix.service enabled
rsyslog.service enabled
sshd.service enabled
systemd-readahead-collect.service enabled
systemd-readahead-drop.service enabled
systemd-readahead-replay.service enabled
tuned.service enabled
vsftpd.service enabled
xinetd.service enabled

正在运行的服务

auditd.service loaded active running Security Auditing Service
crond.service loaded active running Command Scheduler
dbus.service loaded active running D-Bus System Message Bus
dhcpd.service loaded active running DHCPv4 Server Daemon
getty@tty1.service loaded active running Getty on tty1
lvm2-lvmetad.service loaded active running LVM2 metadata daemon
NetworkManager.service loaded active running Network Manager
polkit.service loaded active running Authorization Manager
postfix.service loaded active running Postfix Mail Transport Agent
rsyslog.service loaded active running System Logging Service
sshd.service loaded active running OpenSSH server daemon
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-udevd.service loaded active running udev Kernel Device Manager
tuned.service loaded active running Dynamic System Tuning Daemon
vsftpd.service loaded active running Vsftpd ftp daemon
wpa_supplicant.service loaded active running WPA Supplicant daemon
xinetd.service loaded active running Xinetd A Powerful Replacement For Inetd

############################ 自启动检查 ##########################
touch /var/lock/subsys/local

############################ 登录检查 ############################
root pts/0 192.168.100.1 Tue Aug 9 23:47 still logged in
root pts/1 192.168.100.1 Tue Aug 9 23:46 still logged in
root pts/0 192.168.100.1 Tue Aug 9 23:45 - 23:46 (00:00)
root pts/0 192.168.100.1 Tue Aug 9 16:46 - 23:45 (06:59)
root tty1 Tue Aug 9 00:40 still logged in
reboot system boot 3.10.0-327.el7.x Tue Aug 9 00:40 - 01:16 (1+00:35)

wtmp begins Tue Aug 9 00:40:43 2016

############################ 计划任务检查 ########################
-rw-r--r--. 1 root root 128 Jul 27 2015 /etc/cron.d/0hourly
-rwx------. 1 root root 180 Jul 31 2013 /etc/cron.daily/logrotate
-rwxr-xr-x. 1 root root 332 Dec 3 2015 /etc/cron.daily/0yum-daily.cron
-rwxr-xr-x. 1 root root 618 Mar 18 2014 /etc/cron.daily/man-db.cron
-rw-------. 1 root root 0 Jul 27 2015 /etc/cron.deny
-rwxr-xr-x. 1 root root 362 Dec 3 2015 /etc/cron.hourly/0yum-hourly.cron
-rwxr-xr-x. 1 root root 392 Jul 27 2015 /etc/cron.hourly/0anacron
-rw-r--r--. 1 root root 451 Jun 10 2014 /etc/crontab

############################ 用户检查 ############################
/etc/passwd 最后修改时间：2016-08-09 16:47:13 (0 天 8 小时前)

特权用户

root

用户列表

用户名 UID GID HOME SHELL 最后一次登录
root 0 0 /root /bin/bash 2016-08-09_23:47:00

空密码用户

相同ID的用户

############################ 密码检查 ############################

密码过期检查

root 永不过期

密码策略检查

PASS_MAX_DAYS 99999
PASS_MIN_DAYS 0
PASS_MIN_LEN 5
PASS_WARN_AGE 7

############################ Sudoers检查 #########################
root ALL=(ALL) ALL
%wheel ALL=(ALL) ALL

############################ JDK检查 #############################
JAVA_HOME=""

############################ 防火墙检查 ##########################
iptables: inactive

/etc/sysconfig/iptables

############################ SSH检查 #############################
服务状态：active
SSH协议版本：2

信任主机

是否允许ROOT远程登录

PermitRootLogin yes

/etc/ssh/sshd_config

HostKey /etc/ssh/ssh_host_rsa_key
HostKey /etc/ssh/ssh_host_ecdsa_key
HostKey /etc/ssh/ssh_host_ed25519_key
SyslogFacility AUTHPRIV
AuthorizedKeysFile .ssh/authorized_keys
PasswordAuthentication yes
ChallengeResponseAuthentication no
GSSAPIAuthentication yes
GSSAPICleanupCredentials no
UsePAM yes
X11Forwarding yes
UsePrivilegeSeparation sandbox # Default for new installations.
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE
AcceptEnv XMODIFIERS
Subsystem sftp /usr/libexec/openssh/sftp-server

############################ syslog检查 ##########################
服务状态：active

/etc/rsyslog.conf

.info;mail.none;authpriv.none;cron.none /var/log/messages
authpriv. /var/log/secure
mail.* -/var/log/maillog
cron.* /var/log/cron
.emerg :omusrmsg:
uucp,news.crit /var/log/spooler
local7.* /var/log/boot.log

############################ SNMP检查 ############################
服务状态：unknown

############################ NTP检查 #############################

############################ 软件检查 ############################
telnet-0.17-59.el7.x86_64 Tue 09 Aug 2016 11:43:37 PM CST
syslinux-tftpboot-4.05-12.el7.x86_64 Tue 09 Aug 2016 05:26:19 PM CST
syslinux-4.05-12.el7.x86_64 Tue 09 Aug 2016 05:26:19 PM CST
mtools-4.0.18-5.el7.x86_64 Tue 09 Aug 2016 05:26:18 PM CST
ftp-0.17-66.el7.x86_64 Tue 09 Aug 2016 05:05:47 PM CST
tftp-server-5.2-12.el7.x86_64 Tue 09 Aug 2016 04:54:30 PM CST
tftp-5.2-12.el7.x86_64 Tue 09 Aug 2016 04:54:30 PM CST
xinetd-2.3.15-12.el7.x86_64 Tue 09 Aug 2016 04:54:24 PM CST
vsftpd-3.0.2-11.el7_2.x86_64 Tue 09 Aug 2016 04:50:36 PM CST
gpg-pubkey-f4a80eb5-53a7ff4b Tue 09 Aug 2016 04:47:13 PM CST

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290

脚本代码

!/bin/bash

主机信息每日巡检

version 2016.08.09

当前脚本适用于CentOS/RedHat 6.X、7.X

环境变量PATH没设好，在cron里执行时有很多命令会找不到

export PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
source /etc/profile

[ $(id -u) -gt 0 ] && echo "请用root用户执行此脚本！" && exit 1

uploadHostDailyCheckApi="http://10.0.0.1:8080/api/uploadHostDailyCheck"

uploadHostDailyCheckReportApi="http://10.0.0.1:8080/api/uploadHostDailyCheckReport"

centosVersion=$(awk '{print $(NF-1)}' /etc/redhat-release)
VERSION="2016.08.09"

日志相关

PROGPATH=echo $0 | sed -e 's,[\\/][^\\/][^\\/]*$,,'
[ -f $PROGPATH ] && PROGPATH="."
LOGPATH="$PROGPATH/log"
[ -e $LOGPATH ] || mkdir $LOGPATH
RESULTFILE="$LOGPATH/HostDailyCheck-hostname-date +%Y%m%d.txt"

定义报表的全局变量

report_DateTime="" #日期 ok
report_Hostname="" #主机名 ok
report_OSRelease="" #发行版本 ok
report_Kernel="" #内核 ok
report_Language="" #语言/编码 ok
report_LastReboot="" #最近启动时间 ok
report_Uptime="" #运行时间（天） ok
report_CPUs="" #CPU数量 ok
report_CPUType="" #CPU类型 ok
report_Arch="" #CPU架构 ok
report_MemTotal="" #内存总容量(MB) ok
report_MemFree="" #内存剩余(MB) ok
report_MemUsedPercent="" #内存使用率% ok
report_DiskTotal="" #硬盘总容量(GB) ok
report_DiskFree="" #硬盘剩余(GB) ok
report_DiskUsedPercent="" #硬盘使用率% ok
report_InodeTotal="" #Inode总量 ok
report_InodeFree="" #Inode剩余 ok
report_InodeUsedPercent="" #Inode使用率 ok
report_IP="" #IP地址 ok
report_MAC="" #MAC地址 ok
report_Gateway="" #默认网关 ok
report_DNS="" #DNS ok
report_Listen="" #监听 ok
report_Selinux="" #Selinux ok
report_Firewall="" #防火墙 ok
report_USERs="" #用户 ok
report_USEREmptyPassword="" #空密码用户 ok
report_USERTheSameUID="" #相同ID的用户 ok
report_PasswordExpiry="" #密码过期（天） ok
report_RootUser="" #root用户 ok
report_Sudoers="" #sudo授权 ok
report_SSHAuthorized="" #SSH信任主机 ok
report_SSHDProtocolVersion="" #SSH协议版本 ok
report_SSHDPermitRootLogin="" #允许root远程登录 ok
report_DefunctProsess="" #僵尸进程数量 ok
report_SelfInitiatedService="" #自启动服务数量 ok
report_SelfInitiatedProgram="" #自启动程序数量 ok
report_RuningService="" #运行中服务数 ok
report_Crontab="" #计划任务数 ok
report_Syslog="" #日志服务 ok
report_SNMP="" #SNMP OK
report_NTP="" #NTP ok
report_JDK="" #JDK版本 ok
function version(){
echo ""
echo ""
echo "系统巡检脚本：Version $VERSION"
}

function getCpuStatus(){
echo ""
echo ""
echo "############################ CPU检查 #############################"
Physical_CPUs=$(grep "physical id" /proc/cpuinfo| sort | uniq | wc -l)
Virt_CPUs=$(grep "processor" /proc/cpuinfo | wc -l)
CPU_Kernels=$(grep "cores" /proc/cpuinfo|uniq| awk -F ': ' '{print $2}')
CPU_Type=$(grep "model name" /proc/cpuinfo | awk -F ': ' '{print $2}' | sort | uniq)
CPU_Arch=$(uname -m)
echo "物理CPU个数:$Physical_CPUs"
echo "逻辑CPU个数:$Virt_CPUs"
echo "每CPU核心数:$CPU_Kernels"
echo " CPU型号:$CPU_Type"
echo " CPU架构:$CPU_Arch"
#报表信息
report_CPUs=$Virt_CPUs #CPU数量
report_CPUType=$CPU_Type #CPU类型
report_Arch=$CPU_Arch #CPU架构
}

function getMemStatus(){
echo ""
echo ""
echo "############################ 内存检查 ############################"
if [[ $centosVersion < 7 ]];then
free -mo
else
free -h
fi
#报表信息
MemTotal=$(grep MemTotal /proc/meminfo| awk '{print $2}') #KB
MemFree=$(grep MemFree /proc/meminfo| awk '{print $2}') #KB
let MemUsed=MemTotal-MemFree
MemPercent=$(awk "BEGIN {if($MemTotal==0){printf 100}else{printf "%.2f",$MemUsed100/$MemTotal}}")
report_MemTotal="$((MemTotal/1024))""MB" #内存总容量(MB)
report_MemFree="$((MemFree/1024))""MB" #内存剩余(MB)
report_MemUsedPercent="$(awk "BEGIN {if($MemTotal==0){printf 100}else{printf "%.2f",$MemUsed100/$MemTotal}}")""%" #内存使用率%
}

function getDiskStatus(){
echo ""
echo ""
echo "############################ 磁盘检查 ############################"
df -hiP | sed 's/Mounted on/Mounted/'> /tmp/inode
df -hTP | sed 's/Mounted on/Mounted/'> /tmp/disk
join /tmp/disk /tmp/inode | awk '{print $1,$2,"|",$3,$4,$5,$6,"|",$8,$9,$10,$11,"|",$12}'| column -t
#报表信息
diskdata=$(df -TP | sed '1d' | awk '$2!="tmpfs"{print}') #KB
disktotal=$(echo "$diskdata" | awk '{total+=$3}END{print total}') #KB
diskused=$(echo "$diskdata" | awk '{total+=$4}END{print total}') #KB
diskfree=$((disktotal-diskused)) #KB
diskusedpercent=$(echo $disktotal $diskused | awk '{if($1==0){printf 100}else{printf "%.2f",$2100/$1}}')
inodedata=$(df -iTP | sed '1d' | awk '$2!="tmpfs"{print}')
inodetotal=$(echo "$inodedata" | awk '{total+=$3}END{print total}')
inodeused=$(echo "$inodedata" | awk '{total+=$4}END{print total}')
inodefree=$((inodetotal-inodeused))
inodeusedpercent=$(echo $inodetotal $inodeused | awk '{if($1==0){printf 100}else{printf "%.2f",$2100/$1}}')
report_DiskTotal=$((disktotal/1024/1024))"GB" #硬盘总容量(GB)
report_DiskFree=$((diskfree/1024/1024))"GB" #硬盘剩余(GB)
report_DiskUsedPercent="$diskusedpercent""%" #硬盘使用率%
report_InodeTotal=$((inodetotal/1000))"K" #Inode总量
report_InodeFree=$((inodefree/1000))"K" #Inode剩余
report_InodeUsedPercent="$inodeusedpercent""%" #Inode使用率%

}

function getSystemStatus(){
echo ""
echo ""
echo "############################ 系统检查 ############################"
if [ -e /etc/sysconfig/i18n ];then
default_LANG="$(grep "LANG=" /etc/sysconfig/i18n | grep -v "^#" | awk -F '"' '{print $2}')"
else
default_LANG=$LANG
fi
export LANG="en_US.UTF-8"
Release=$(cat /etc/redhat-release 2>/dev/null)
Kernel=$(uname -r)
OS=$(uname -o)
Hostname=$(uname -n)
SELinux=$(/usr/sbin/sestatus | grep "SELinux status: " | awk '{print $3}')
LastReboot=$(who -b | awk '{print $3,$4}')
uptime=$(uptime | sed 's/.up ([^,]), .*/\1/')
echo " 系统：$OS"
echo " 发行版本：$Release"
echo " 内核：$Kernel"
echo " 主机名：$Hostname"
echo " SELinux：$SELinux"
echo "语言/编码：$default_LANG"
echo " 当前时间：$(date +'%F %T')"
echo " 最后启动：$LastReboot"
echo " 运行时间：$uptime"
#报表信息
report_DateTime=$(date +"%F %T") #日期
report_Hostname="$Hostname" #主机名
report_OSRelease="$Release" #发行版本
report_Kernel="$Kernel" #内核
report_Language="$default_LANG" #语言/编码
report_LastReboot="$LastReboot" #最近启动时间
report_Uptime="$uptime" #运行时间（天）
report_Selinux="$SELinux"
export LANG="$default_LANG"

}

function getServiceStatus(){
echo ""
echo ""
echo "############################ 服务检查 ############################"
echo ""
if [[ $centosVersion > 7 ]];then
conf=$(systemctl list-unit-files --type=service --state=enabled --no-pager | grep "enabled")
process=$(systemctl list-units --type=service --state=running --no-pager | grep ".service")
#报表信息
report_SelfInitiatedService="$(echo "$conf" | wc -l)" #自启动服务数量
report_RuningService="$(echo "$process" | wc -l)" #运行中服务数量
else
conf=$(/sbin/chkconfig | grep -E ":on|:启用")
process=$(/sbin/service --status-all 2>/dev/null | grep -E "is running|正在运行")
#报表信息
report_SelfInitiatedService="$(echo "$conf" | wc -l)" #自启动服务数量
report_RuningService="$(echo "$process" | wc -l)" #运行中服务数量
fi
echo "服务配置"
echo "--------"
echo "$conf" | column -t
echo ""
echo "正在运行的服务"
echo "--------------"
echo "$process"

}

function getAutoStartStatus(){
echo ""
echo ""
echo "############################ 自启动检查 ##########################"
conf=$(grep -v "^#" /etc/rc.d/rc.local| sed '/^$/d')
echo "$conf"
#报表信息
report_SelfInitiatedProgram="$(echo $conf | wc -l)" #自启动程序数量
}

function getLoginStatus(){
echo ""
echo ""
echo "############################ 登录检查 ############################"
last | head
}

function getNetworkStatus(){
echo ""
echo ""
echo "############################ 网络检查 ############################"
if [[ $centosVersion < 7 ]];then
/sbin/ifconfig -a | grep -v packets | grep -v collisions | grep -v inet6
else
#ip a
for i in $(ip link | grep BROADCAST | awk -F: '{print $2}');do ip add show $i | grep -E "BROADCAST|global"| awk '{print $2}' | tr '\n' ' ' ;echo "" ;done
fi
GATEWAY=$(ip route | grep default | awk '{print $3}')
DNS=$(grep nameserver /etc/resolv.conf| grep -v "#" | awk '{print $2}' | tr '\n' ',' | sed 's/,$//')
echo ""
echo "网关：$GATEWAY "
echo " DNS：$DNS"
#报表信息
IP=$(ip -f inet addr | grep -v 127.0.0.1 | grep inet | awk '{print $NF,$2}' | tr '\n' ',' | sed 's/,$//')
MAC=$(ip link | grep -v "LOOPBACK|loopback" | awk '{print $2}' | sed 'N;s/\n//' | tr '\n' ',' | sed 's/,$//')
report_IP="$IP" #IP地址
report_MAC=$MAC #MAC地址
report_Gateway="$GATEWAY" #默认网关
report_DNS="$DNS" #DNS
}

function getListenStatus(){
echo ""
echo ""
echo "############################ 监听检查 ############################"
TCPListen=$(ss -ntul | column -t)
echo "$TCPListen"
#报表信息
report_Listen="$(echo "$TCPListen"| sed '1d' | awk '/tcp/ {print $5}' | awk -F: '{print $NF}' | sort | uniq | wc -l)"
}

function getCronStatus(){
echo ""
echo ""
echo "############################ 计划任务检查 ########################"
Crontab=0
for shell in $(grep -v "/sbin/nologin" /etc/shells);do
for user in $(grep "$shell" /etc/passwd| awk -F: '{print $1}');do
crontab -l -u $user >/dev/null 2>&1
status=$?
if [ $status -eq 0 ];then
echo "$user"
echo "--------"
crontab -l -u $user
let Crontab=Crontab+$(crontab -l -u $user | wc -l)
echo ""
fi
done
done
#计划任务
find /etc/cron* -type f | xargs -i ls -l {} | column -t
let Crontab=Crontab+$(find /etc/cron* -type f | wc -l)
#报表信息
report_Crontab="$Crontab" #计划任务数
}
function getHowLongAgo(){
# 计算一个时间戳离现在有多久了
datetime="$"
[ -z "$datetime" ] && echo "错误的参数：getHowLongAgo() $"
Timestamp=$(date +%s -d "$datetime") #转化为时间戳
Now_Timestamp=$(date +%s)
Difference_Timestamp=$(($Now_Timestamp-$Timestamp))
days=0;hours=0;minutes=0;
sec_in_day=$((606024));
sec_in_hour=$((60*60));
sec_in_minute=60
while (( $(($Difference_Timestamp-$sec_in_day)) > 1 ))
do
let Difference_Timestamp=Difference_Timestamp-sec_in_day
let days++
done
while (( $(($Difference_Timestamp-$sec_in_hour)) > 1 ))
do
let Difference_Timestamp=Difference_Timestamp-sec_in_hour
let hours++
done
echo "$days 天 $hours 小时前"
}

function getUserLastLogin(){
# 获取用户最近一次登录的时间，含年份
# 很遗憾last命令不支持显示年份，只有"last -t YYYYMMDDHHMMSS"表示某个时间之间的登录，我
# 们只能用最笨的方法了，对比今天之前和今年元旦之前（或者去年之前和前年之前……）某个用户
# 登录次数，如果登录统计次数有变化，则说明最近一次登录是今年。
username=$1
: ${username:="whoami"}
thisYear=$(date +%Y)
oldesYear=$(last | tail -n1 | awk '{print $NF}')
while(( $thisYear >= $oldesYear));do
loginBeforeToday=$(last $username | grep $username | wc -l)
loginBeforeNewYearsDayOfThisYear=$(last $username -t $thisYear"0101000000" | grep $username | wc -l)
if [ $loginBeforeToday -eq 0 ];then
echo "从未登录过"
break
elif [ $loginBeforeToday -gt $loginBeforeNewYearsDayOfThisYear ];then
lastDateTime=$(last -i $username | head -n1 | awk '{for(i=4;i<(NF-2);i++)printf"%s ",$i}')" $thisYear" #格式如: Sat Nov 2 20:33 2015
lastDateTime=$(date "+%Y-%m-%d %H:%M:%S" -d "$lastDateTime")
echo "$lastDateTime"
break
else
thisYear=$((thisYear-1))
fi
done

}

function getUserStatus(){
echo ""
echo ""
echo "############################ 用户检查 ############################"
#/etc/passwd 最后修改时间
pwdfile="$(cat /etc/passwd)"
Modify=$(stat /etc/passwd | grep Modify | tr '.' ' ' | awk '{print $2,$3}')

echo "/etc/passwd 最后修改时间：$Modify ($(getHowLongAgo $Modify))"
echo ""
echo "特权用户"
echo "--------"
RootUser=""
for user in $(echo "$pwdfile" | awk -F: '{print $1}');do
    if [ $(id -u $user) -eq 0 ];then
        echo "$user"
        RootUser="$RootUser,$user"
    fi
done
echo ""
echo "用户列表"
echo "--------"
USERs=0
echo "$(
echo "用户名 UID GID HOME SHELL 最后一次登录"
for shell in $(grep -v "/sbin/nologin" /etc/shells);do
    for username in $(grep "$shell" /etc/passwd| awk -F: '{print $1}');do
        userLastLogin="$(getUserLastLogin $username)"
        echo "$pwdfile" | grep -w "$username" |grep -w "$shell"| awk -F: -v lastlogin="$(echo "$userLastLogin" | tr ' ' '_')" '{print $1,$3,$4,$6,$7,lastlogin}'
    done
    let USERs=USERs+$(echo "$pwdfile" | grep "$shell"| wc -l)
done
)" | column -t
echo ""
echo "空密码用户"
echo "----------"
USEREmptyPassword=""
for shell in $(grep -v "/sbin/nologin" /etc/shells);do
        for user in $(echo "$pwdfile" | grep "$shell" | cut -d: -f1);do
        r=$(awk -F: '$2=="!!"{print $1}' /etc/shadow | grep -w $user)
        if [ ! -z $r ];then
            echo $r
            USEREmptyPassword="$USEREmptyPassword,"$r
        fi
    done    
done
echo ""
echo "相同ID的用户"
echo "------------"
USERTheSameUID=""
UIDs=$(cut -d: -f3 /etc/passwd | sort | uniq -c | awk '$1>1{print $2}')
for uid in $UIDs;do
    echo -n "$uid";
    USERTheSameUID="$uid"
    r=$(awk -F: 'ORS="";$3=='"$uid"'{print ":",$1}' /etc/passwd)
    echo "$r"
    echo ""
    USERTheSameUID="$USERTheSameUID $r,"
done
#报表信息
report_USERs="$USERs"    #用户
report_USEREmptyPassword=$(echo $USEREmptyPassword | sed 's/^,//') 
report_USERTheSameUID=$(echo $USERTheSameUID | sed 's/,$//') 
report_RootUser=$(echo $RootUser | sed 's/^,//')    #特权用户

}

function getPasswordStatus {
echo ""
echo ""
echo "############################ 密码检查 ############################"
pwdfile="$(cat /etc/passwd)"
echo ""
echo "密码过期检查"
echo "------------"
result=""
for shell in $(grep -v "/sbin/nologin" /etc/shells);do
for user in $(echo "$pwdfile" | grep "$shell" | cut -d: -f1);do
get_expiry_date=$(/usr/bin/chage -l $user | grep 'Password expires' | cut -d: -f2)
if [[ $get_expiry_date = ' never' || $get_expiry_date = 'never' ]];then
printf "%-15s 永不过期\n" $user
result="$result,$user:never"
else
password_expiry_date=$(date -d "$get_expiry_date" "+%s")
current_date=$(date "+%s")
diff=$(($password_expiry_date-$current_date))
let DAYS=$(($diff/(606024)))
printf "%-15s %s天后过期\n" $user $DAYS
result="$result,$user:$DAYS days"
fi
done
done
report_PasswordExpiry=$(echo $result | sed 's/^,//')

echo ""
echo "密码策略检查"
echo "------------"
grep -v "#" /etc/login.defs | grep -E "PASS_MAX_DAYS|PASS_MIN_DAYS|PASS_MIN_LEN|PASS_WARN_AGE"

}

function getSudoersStatus(){
echo ""
echo ""
echo "############################ Sudoers检查 #########################"
conf=$(grep -v "^#" /etc/sudoers| grep -v "^Defaults" | sed '/^$/d')
echo "$conf"
echo ""
#报表信息
report_Sudoers="$(echo $conf | wc -l)"
}

function getInstalledStatus(){
echo ""
echo ""
echo "############################ 软件检查 ############################"
rpm -qa --last | head | column -t
}

function getProcessStatus(){
echo ""
echo ""
echo "############################ 进程检查 ############################"
if [ $(ps -ef | grep defunct | grep -v grep | wc -l) -ge 1 ];then
echo ""
echo "僵尸进程";
echo "--------"
ps -ef | head -n1
ps -ef | grep defunct | grep -v grep
fi
echo ""
echo "内存占用TOP10"
echo "-------------"
echo -e "PID %MEM RSS COMMAND
$(ps aux | awk '{print $2, $4, $6, $11}' | sort -k3rn | head -n 10 )"| column -t
echo ""
echo "CPU占用TOP10"
echo "------------"
top b -n1 | head -17 | tail -11
#报表信息
report_DefunctProsess="$(ps -ef | grep defunct | grep -v grep|wc -l)"
}

function getJDKStatus(){
echo ""
echo ""
echo "############################ JDK检查 #############################"
java -version 2>/dev/null
if [ $? -eq 0 ];then
java -version 2>&1
fi
echo "JAVA_HOME="$JAVA_HOME""
#报表信息
report_JDK="$(java -version 2>&1 | grep version | awk '{print $1,$3}' | tr -d '"')"
}
function getSyslogStatus(){
echo ""
echo ""
echo "############################ syslog检查 ##########################"
echo "服务状态：$(getState rsyslog)"
echo ""
echo "/etc/rsyslog.conf"
echo "-----------------"
cat /etc/rsyslog.conf 2>/dev/null | grep -v "^#" | grep -v "^\$" | sed '/^$/d' | column -t
#报表信息
report_Syslog="$(getState rsyslog)"
}
function getFirewallStatus(){
echo ""
echo ""
echo "############################ 防火墙检查 ##########################"
#防火墙状态，策略等
if [[ $centosVersion < 7 ]];then
/etc/init.d/iptables status >/dev/null 2>&1
status=$?
if [ $status -eq 0 ];then
s="active"
elif [ $status -eq 3 ];then
s="inactive"
elif [ $status -eq 4 ];then
s="permission denied"
else
s="unknown"
fi
else
s="$(getState iptables)"
fi
echo "iptables: $s"
echo ""
echo "/etc/sysconfig/iptables"
echo "-----------------------"
cat /etc/sysconfig/iptables 2>/dev/null
#报表信息
report_Firewall="$s"
}

function getSNMPStatus(){
#SNMP服务状态，配置等
echo ""
echo ""
echo "############################ SNMP检查 ############################"
status="$(getState snmpd)"
echo "服务状态：$status"
echo ""
if [ -e /etc/snmp/snmpd.conf ];then
echo "/etc/snmp/snmpd.conf"
echo "--------------------"
cat /etc/snmp/snmpd.conf 2>/dev/null | grep -v "^#" | sed '/^$/d'
fi
#报表信息
report_SNMP="$(getState snmpd)"
}

function getState(){
if [[ $centosVersion < 7 ]];then
if [ -e "/etc/init.d/$1" ];then
if [ /etc/init.d/$1 status 2>/dev/null | grep -E "is running|正在运行" | wc -l -ge 1 ];then
r="active"
else
r="inactive"
fi
else
r="unknown"
fi
else
#CentOS 7+
r="$(systemctl is-active $1 2>&1)"
fi
echo "$r"
}

function getSSHStatus(){
#SSHD服务状态，配置,受信任主机等
echo ""
echo ""
echo "############################ SSH检查 #############################"
#检查受信任主机
pwdfile="$(cat /etc/passwd)"
echo "服务状态：$(getState sshd)"
Protocol_Version=$(cat /etc/ssh/sshd_config | grep Protocol | awk '{print $2}')
echo "SSH协议版本：$Protocol_Version"
echo ""
echo "信任主机"
echo "--------"
authorized=0
for user in $(echo "$pwdfile" | grep /bin/bash | awk -F: '{print $1}');do
authorize_file=$(echo "$pwdfile" | grep -w $user | awk -F: '{printf $6"/.ssh/authorized_keys"}')
authorized_host=$(cat $authorize_file 2>/dev/null | awk '{print $3}' | tr '\n' ',' | sed 's/,$//')
if [ ! -z $authorized_host ];then
echo "$user 授权 "$authorized_host" 无密码访问"
fi
let authorized=authorized+$(cat $authorize_file 2>/dev/null | awk '{print $3}'|wc -l)
done

echo ""
echo "是否允许ROOT远程登录"
echo "--------------------"
config=$(cat /etc/ssh/sshd_config | grep PermitRootLogin)
firstChar=${config:0:1}
if [ $firstChar == "#" ];then
    PermitRootLogin="yes"  #默认是允许ROOT远程登录的
else
    PermitRootLogin=$(echo $config | awk '{print $2}')
fi
echo "PermitRootLogin $PermitRootLogin"

echo ""
echo "/etc/ssh/sshd_config"
echo "--------------------"
cat /etc/ssh/sshd_config | grep -v "^#" | sed '/^$/d'

#报表信息
report_SSHAuthorized="$authorized"    #SSH信任主机
report_SSHDProtocolVersion="$Protocol_Version"    #SSH协议版本
report_SSHDPermitRootLogin="$PermitRootLogin"    #允许root远程登录

}
function getNTPStatus(){
#NTP服务状态，当前时间，配置等
echo ""
echo ""
echo "############################ NTP检查 #############################"
if [ -e /etc/ntp.conf ];then
echo "服务状态：$(getState ntpd)"
echo ""
echo "/etc/ntp.conf"
echo "-------------"
cat /etc/ntp.conf 2>/dev/null | grep -v "^#" | sed '/^$/d'
fi
#报表信息
report_NTP="$(getState ntpd)"
}

function uploadHostDailyCheckReport(){
json="{
"DateTime":"$report_DateTime",
"Hostname":"$report_Hostname",
"OSRelease":"$report_OSRelease",
"Kernel":"$report_Kernel",
"Language":"$report_Language",
"LastReboot":"$report_LastReboot",
"Uptime":"$report_Uptime",
"CPUs":"$report_CPUs",
"CPUType":"$report_CPUType",
"Arch":"$report_Arch",
"MemTotal":"$report_MemTotal",
"MemFree":"$report_MemFree",
"MemUsedPercent":"$report_MemUsedPercent",
"DiskTotal":"$report_DiskTotal",
"DiskFree":"$report_DiskFree",
"DiskUsedPercent":"$report_DiskUsedPercent",
"InodeTotal":"$report_InodeTotal",
"InodeFree":"$report_InodeFree",
"InodeUsedPercent":"$report_InodeUsedPercent",
"IP":"$report_IP",
"MAC":"$report_MAC",
"Gateway":"$report_Gateway",
"DNS":"$report_DNS",
"Listen":"$report_Listen",
"Selinux":"$report_Selinux",
"Firewall":"$report_Firewall",
"USERs":"$report_USERs",
"USEREmptyPassword":"$report_USEREmptyPassword",
"USERTheSameUID":"$report_USERTheSameUID",
"PasswordExpiry":"$report_PasswordExpiry",
"RootUser":"$report_RootUser",
"Sudoers":"$report_Sudoers",
"SSHAuthorized":"$report_SSHAuthorized",
"SSHDProtocolVersion":"$report_SSHDProtocolVersion",
"SSHDPermitRootLogin":"$report_SSHDPermitRootLogin",
"DefunctProsess":"$report_DefunctProsess",
"SelfInitiatedService":"$report_SelfInitiatedService",
"SelfInitiatedProgram":"$report_SelfInitiatedProgram",
"RuningService":"$report_RuningService",
"Crontab":"$report_Crontab",
"Syslog":"$report_Syslog",
"SNMP":"$report_SNMP",
"NTP":"$report_NTP",
"JDK":"$report_JDK"
}"
#echo "$json"
curl -l -H "Content-type: application/json" -X POST -d "$json" "$uploadHostDailyCheckReportApi" 2>/dev/null
}

function check(){
version
getSystemStatus
getCpuStatus
getMemStatus
getDiskStatus
getNetworkStatus
getListenStatus
getProcessStatus
getServiceStatus
getAutoStartStatus
getLoginStatus
getCronStatus
getUserStatus
getPasswordStatus
getSudoersStatus
getJDKStatus
getFirewallStatus
getSSHStatus
getSyslogStatus
getSNMPStatus
getNTPStatus
getInstalledStatus
}

执行检查并保存检查结果

check > $RESULTFILE

echo "检查结果：$RESULTFILE"

上传检查结果的文件

curl -F "filename=@$RESULTFILE" "$uploadHostDailyCheckApi" 2>/dev/null

上传检查结果的报表

uploadHostDailyCheckReport 1>/dev/null```

系统巡检脚本：Version 2016.08.09

############################ 系统检查 ############################
系统：GNU/Linux
发行版本：CentOS Linux release 7.2.1511 (Core)
内核：3.10.0-327.el7.x86_64
主机名：localhost.localdomain
SELinux：enabled
语言/编码：en_US.UTF-8
当前时间：2016-08-10 01:16:38
最后启动：2016-08-09 00:40
运行时间：1 day

############################ CPU检查 #############################
物理CPU个数:1
逻辑CPU个数:1
每CPU核心数:1
CPU型号:Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz
CPU架构:x86_64

############################ 内存检查 ############################
total used free shared buff/cache available
Mem: 1.9G 138M 343M 8.6M 1.5G 1.6G
Swap: 2.0G 0B 2.0G

############################ 磁盘检查 ############################
Filesystem Type | Size Used Avail Use% | Inodes IUsed IFree IUse% | Mounted
/dev/mapper/centos-root xfs | 18G 1.6G 16G 9% | 18M 24K 18M 1% | /
devtmpfs devtmpfs | 983M 0 983M 0% | 246K 381 246K 1% | /dev
tmpfs tmpfs | 993M 0 993M 0% | 249K 1 249K 1% | /dev/shm
tmpfs tmpfs | 993M 0 993M 0% | 249K 485 248K 1% | /run
tmpfs tmpfs | 993M 0 993M 0% | 249K 13 249K 1% | /sys/fs/cgroup
tmpfs tmpfs | 993M 8.6M 985M 1% | 249K 1 249K 1% | /dev/shm
tmpfs tmpfs | 993M 8.6M 985M 1% | 249K 485 248K 1% | /run
tmpfs tmpfs | 993M 8.6M 985M 1% | 249K 13 249K 1% | /sys/fs/cgroup
tmpfs tmpfs | 993M 0 993M 0% | 249K 1 249K 1% | /dev/shm
tmpfs tmpfs | 993M 0 993M 0% | 249K 485 248K 1% | /run
tmpfs tmpfs | 993M 0 993M 0% | 249K 13 249K 1% | /sys/fs/cgroup
/dev/sda1 xfs | 497M 107M 391M 22% | 500K 329 500K 1% | /boot
tmpfs tmpfs | 199M 0 199M 0% | 249K 1 249K 1% | /run/user/0
/dev/loop0 iso9660 | 603M 603M 0 100% | 0 0 0 - | /var/ftp/pub

############################ 网络检查 ############################
eno16777736: 192.168.100.63/24 192.168.100.68/24

网关：192.168.100.2
DNS：192.168.100.2

############################ 监听检查 ############################
Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port
udp UNCONN 0 0 *:14034 :
udp UNCONN 0 0 :46966 :
udp UNCONN 0 0 :67 :
udp UNCONN 0 0 :68 :
udp UNCONN 0 0 :69 :
udp UNCONN 0 0 :::46966 :::
udp UNCONN 0 0 :::32833 :::
tcp LISTEN 0 128 :22 :
tcp LISTEN 0 100 127.0.0.1:25 :
tcp LISTEN 0 32 :::21 :::
tcp LISTEN 0 128 :::22 :::
tcp LISTEN 0 100 ::1:25 :::

############################ 进程检查 ############################

内存占用TOP10

PID %MEM RSS COMMAND
10069 0.9 18612 /usr/sbin/dhcpd
1212 0.8 16396 /usr/bin/python
10036 0.7 15800 /sbin/dhclient
992 0.5 11992 /usr/lib/polkit-1/polkitd
962 0.4 8232 /usr/sbin/NetworkManager
1 0.3 7208 /usr/lib/systemd/systemd
969 0.2 5320 /usr/sbin/rsyslogd
10196 0.2 5076 sshd:
10175 0.2 5072 sshd:
810 0.2 4996 /usr/lib/systemd/systemd-journald

CPU占用TOP10

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
10638 root 20 0 146272 2164 1352 R 6.2 0.1 0:00.01 top
1 root 20 0 44496 7208 2612 S 0.0 0.4 0:03.83 systemd
2 root 20 0 0 0 0 S 0.0 0.0 0:00.04 kthreadd
3 root 20 0 0 0 0 S 0.0 0.0 0:00.67 ksoftirqd/0
7 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/0
8 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_bh
9 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcuob/0
10 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcuob/1
11 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcuob/2
12 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcuob/3

############################ 服务检查 ############################

服务配置

auditd.service enabled
crond.service enabled
dbus-org.freedesktop.NetworkManager.service enabled
dbus-org.freedesktop.nm-dispatcher.service enabled
dhcpd.service enabled
getty@.service enabled
irqbalance.service enabled
lvm2-monitor.service enabled
microcode.service enabled
NetworkManager-dispatcher.service enabled
NetworkManager.service enabled
postfix.service enabled
rsyslog.service enabled
sshd.service enabled
systemd-readahead-collect.service enabled
systemd-readahead-drop.service enabled
systemd-readahead-replay.service enabled
tuned.service enabled
vsftpd.service enabled
xinetd.service enabled

正在运行的服务

auditd.service loaded active running Security Auditing Service
crond.service loaded active running Command Scheduler
dbus.service loaded active running D-Bus System Message Bus
dhcpd.service loaded active running DHCPv4 Server Daemon
getty@tty1.service loaded active running Getty on tty1
lvm2-lvmetad.service loaded active running LVM2 metadata daemon
NetworkManager.service loaded active running Network Manager
polkit.service loaded active running Authorization Manager
postfix.service loaded active running Postfix Mail Transport Agent
rsyslog.service loaded active running System Logging Service
sshd.service loaded active running OpenSSH server daemon
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-udevd.service loaded active running udev Kernel Device Manager
tuned.service loaded active running Dynamic System Tuning Daemon
vsftpd.service loaded active running Vsftpd ftp daemon
wpa_supplicant.service loaded active running WPA Supplicant daemon
xinetd.service loaded active running Xinetd A Powerful Replacement For Inetd

############################ 自启动检查 ##########################
touch /var/lock/subsys/local

############################ 登录检查 ############################
root pts/0 192.168.100.1 Tue Aug 9 23:47 still logged in
root pts/1 192.168.100.1 Tue Aug 9 23:46 still logged in
root pts/0 192.168.100.1 Tue Aug 9 23:45 - 23:46 (00:00)
root pts/0 192.168.100.1 Tue Aug 9 16:46 - 23:45 (06:59)
root tty1 Tue Aug 9 00:40 still logged in
reboot system boot 3.10.0-327.el7.x Tue Aug 9 00:40 - 01:16 (1+00:35)

wtmp begins Tue Aug 9 00:40:43 2016

############################ 计划任务检查 ########################
-rw-r--r--. 1 root root 128 Jul 27 2015 /etc/cron.d/0hourly
-rwx------. 1 root root 180 Jul 31 2013 /etc/cron.daily/logrotate
-rwxr-xr-x. 1 root root 332 Dec 3 2015 /etc/cron.daily/0yum-daily.cron
-rwxr-xr-x. 1 root root 618 Mar 18 2014 /etc/cron.daily/man-db.cron
-rw-------. 1 root root 0 Jul 27 2015 /etc/cron.deny
-rwxr-xr-x. 1 root root 362 Dec 3 2015 /etc/cron.hourly/0yum-hourly.cron
-rwxr-xr-x. 1 root root 392 Jul 27 2015 /etc/cron.hourly/0anacron
-rw-r--r--. 1 root root 451 Jun 10 2014 /etc/crontab

############################ 用户检查 ############################
/etc/passwd 最后修改时间：2016-08-09 16:47:13 (0 天 8 小时前)

特权用户

root

用户列表

用户名 UID GID HOME SHELL 最后一次登录
root 0 0 /root /bin/bash 2016-08-09_23:47:00

空密码用户

相同ID的用户

############################ 密码检查 ############################

密码过期检查

root 永不过期

密码策略检查

PASS_MAX_DAYS 99999
PASS_MIN_DAYS 0
PASS_MIN_LEN 5
PASS_WARN_AGE 7

############################ Sudoers检查 #########################
root ALL=(ALL) ALL
%wheel ALL=(ALL) ALL

############################ JDK检查 #############################
JAVA_HOME=""

############################ 防火墙检查 ##########################
iptables: inactive

/etc/sysconfig/iptables

############################ SSH检查 #############################
服务状态：active
SSH协议版本：2

信任主机

是否允许ROOT远程登录

PermitRootLogin yes

/etc/ssh/sshd_config

HostKey /etc/ssh/ssh_host_rsa_key
HostKey /etc/ssh/ssh_host_ecdsa_key
HostKey /etc/ssh/ssh_host_ed25519_key
SyslogFacility AUTHPRIV
AuthorizedKeysFile .ssh/authorized_keys
PasswordAuthentication yes
ChallengeResponseAuthentication no
GSSAPIAuthentication yes
GSSAPICleanupCredentials no
UsePAM yes
X11Forwarding yes
UsePrivilegeSeparation sandbox # Default for new installations.
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE
AcceptEnv XMODIFIERS
Subsystem sftp /usr/libexec/openssh/sftp-server

############################ syslog检查 ##########################
服务状态：active

/etc/rsyslog.conf

.info;mail.none;authpriv.none;cron.none /var/log/messages
authpriv. /var/log/secure
mail.* -/var/log/maillog
cron.* /var/log/cron
.emerg :omusrmsg:
uucp,news.crit /var/log/spooler
local7.* /var/log/boot.log

############################ SNMP检查 ############################
服务状态：unknown

############################ NTP检查 #############################

############################ 软件检查 ############################
telnet-0.17-59.el7.x86_64 Tue 09 Aug 2016 11:43:37 PM CST
syslinux-tftpboot-4.05-12.el7.x86_64 Tue 09 Aug 2016 05:26:19 PM CST
syslinux-4.05-12.el7.x86_64 Tue 09 Aug 2016 05:26:19 PM CST
mtools-4.0.18-5.el7.x86_64 Tue 09 Aug 2016 05:26:18 PM CST
ftp-0.17-66.el7.x86_64 Tue 09 Aug 2016 05:05:47 PM CST
tftp-server-5.2-12.el7.x86_64 Tue 09 Aug 2016 04:54:30 PM CST
tftp-5.2-12.el7.x86_64 Tue 09 Aug 2016 04:54:30 PM CST
xinetd-2.3.15-12.el7.x86_64 Tue 09 Aug 2016 04:54:24 PM CST
vsftpd-3.0.2-11.el7_2.x86_64 Tue 09 Aug 2016 04:50:36 PM CST
gpg-pubkey-f4a80eb5-53a7ff4b Tue 09 Aug 2016 04:47:13 PM CST


## <a name="t4"></a>脚本代码

!/bin/bash

主机信息每日巡检

version 2016.08.09

当前脚本适用于CentOS/RedHat 6.X、7.X

环境变量PATH没设好，在cron里执行时有很多命令会找不到

export PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
source /etc/profile

[ $(id -u) -gt 0 ] && echo "请用root用户执行此脚本！" && exit 1

uploadHostDailyCheckApi="http://10.0.0.1:8080/api/uploadHostDailyCheck"

uploadHostDailyCheckReportApi="http://10.0.0.1:8080/api/uploadHostDailyCheckReport"

centosVersion=$(awk '{print $(NF-1)}' /etc/redhat-release)
VERSION="2016.08.09"

日志相关

PROGPATH=echo $0 | sed -e 's,[\\/][^\\/][^\\/]*$,,'
[ -f $PROGPATH ] && PROGPATH="."
LOGPATH="$PROGPATH/log"
[ -e $LOGPATH ] || mkdir $LOGPATH
RESULTFILE="$LOGPATH/HostDailyCheck-hostname-date +%Y%m%d.txt"

定义报表的全局变量

report_DateTime="" #日期 ok
report_Hostname="" #主机名 ok
report_OSRelease="" #发行版本 ok
report_Kernel="" #内核 ok
report_Language="" #语言/编码 ok
report_LastReboot="" #最近启动时间 ok
report_Uptime="" #运行时间（天） ok
report_CPUs="" #CPU数量 ok
report_CPUType="" #CPU类型 ok
report_Arch="" #CPU架构 ok
report_MemTotal="" #内存总容量(MB) ok
report_MemFree="" #内存剩余(MB) ok
report_MemUsedPercent="" #内存使用率% ok
report_DiskTotal="" #硬盘总容量(GB) ok
report_DiskFree="" #硬盘剩余(GB) ok
report_DiskUsedPercent="" #硬盘使用率% ok
report_InodeTotal="" #Inode总量 ok
report_InodeFree="" #Inode剩余 ok
report_InodeUsedPercent="" #Inode使用率 ok
report_IP="" #IP地址 ok
report_MAC="" #MAC地址 ok
report_Gateway="" #默认网关 ok
report_DNS="" #DNS ok
report_Listen="" #监听 ok
report_Selinux="" #Selinux ok
report_Firewall="" #防火墙 ok
report_USERs="" #用户 ok
report_USEREmptyPassword="" #空密码用户 ok
report_USERTheSameUID="" #相同ID的用户 ok
report_PasswordExpiry="" #密码过期（天） ok
report_RootUser="" #root用户 ok
report_Sudoers="" #sudo授权 ok
report_SSHAuthorized="" #SSH信任主机 ok
report_SSHDProtocolVersion="" #SSH协议版本 ok
report_SSHDPermitRootLogin="" #允许root远程登录 ok
report_DefunctProsess="" #僵尸进程数量 ok
report_SelfInitiatedService="" #自启动服务数量 ok
report_SelfInitiatedProgram="" #自启动程序数量 ok
report_RuningService="" #运行中服务数 ok
report_Crontab="" #计划任务数 ok
report_Syslog="" #日志服务 ok
report_SNMP="" #SNMP OK
report_NTP="" #NTP ok
report_JDK="" #JDK版本 ok
function version(){
echo ""
echo ""
echo "系统巡检脚本：Version $VERSION"
}

function getCpuStatus(){
echo ""
echo ""
echo "############################ CPU检查 #############################"
Physical_CPUs=$(grep "physical id" /proc/cpuinfo| sort | uniq | wc -l)
Virt_CPUs=$(grep "processor" /proc/cpuinfo | wc -l)
CPU_Kernels=$(grep "cores" /proc/cpuinfo|uniq| awk -F ': ' '{print $2}')
CPU_Type=$(grep "model name" /proc/cpuinfo | awk -F ': ' '{print $2}' | sort | uniq)
CPU_Arch=$(uname -m)
echo "物理CPU个数:$Physical_CPUs"
echo "逻辑CPU个数:$Virt_CPUs"
echo "每CPU核心数:$CPU_Kernels"
echo " CPU型号:$CPU_Type"
echo " CPU架构:$CPU_Arch"
#报表信息
report_CPUs=$Virt_CPUs #CPU数量
report_CPUType=$CPU_Type #CPU类型
report_Arch=$CPU_Arch #CPU架构
}

function getMemStatus(){
echo ""
echo ""
echo "############################ 内存检查 ############################"
if [[ $centosVersion < 7 ]];then
free -mo
else
free -h
fi
#报表信息
MemTotal=$(grep MemTotal /proc/meminfo| awk '{print $2}') #KB
MemFree=$(grep MemFree /proc/meminfo| awk '{print $2}') #KB
let MemUsed=MemTotal-MemFree
MemPercent=$(awk "BEGIN {if($MemTotal==0){printf 100}else{printf "%.2f",$MemUsed100/$MemTotal}}")
report_MemTotal="$((MemTotal/1024))""MB" #内存总容量(MB)
report_MemFree="$((MemFree/1024))""MB" #内存剩余(MB)
report_MemUsedPercent="$(awk "BEGIN {if($MemTotal==0){printf 100}else{printf "%.2f",$MemUsed100/$MemTotal}}")""%" #内存使用率%
}

function getDiskStatus(){
echo ""
echo ""
echo "############################ 磁盘检查 ############################"
df -hiP | sed 's/Mounted on/Mounted/'> /tmp/inode
df -hTP | sed 's/Mounted on/Mounted/'> /tmp/disk
join /tmp/disk /tmp/inode | awk '{print $1,$2,"|",$3,$4,$5,$6,"|",$8,$9,$10,$11,"|",$12}'| column -t
#报表信息
diskdata=$(df -TP | sed '1d' | awk '$2!="tmpfs"{print}') #KB
disktotal=$(echo "$diskdata" | awk '{total+=$3}END{print total}') #KB
diskused=$(echo "$diskdata" | awk '{total+=$4}END{print total}') #KB
diskfree=$((disktotal-diskused)) #KB
diskusedpercent=$(echo $disktotal $diskused | awk '{if($1==0){printf 100}else{printf "%.2f",$2100/$1}}')
inodedata=$(df -iTP | sed '1d' | awk '$2!="tmpfs"{print}')
inodetotal=$(echo "$inodedata" | awk '{total+=$3}END{print total}')
inodeused=$(echo "$inodedata" | awk '{total+=$4}END{print total}')
inodefree=$((inodetotal-inodeused))
inodeusedpercent=$(echo $inodetotal $inodeused | awk '{if($1==0){printf 100}else{printf "%.2f",$2100/$1}}')
report_DiskTotal=$((disktotal/1024/1024))"GB" #硬盘总容量(GB)
report_DiskFree=$((diskfree/1024/1024))"GB" #硬盘剩余(GB)
report_DiskUsedPercent="$diskusedpercent""%" #硬盘使用率%
report_InodeTotal=$((inodetotal/1000))"K" #Inode总量
report_InodeFree=$((inodefree/1000))"K" #Inode剩余
report_InodeUsedPercent="$inodeusedpercent""%" #Inode使用率%

}

function getSystemStatus(){
echo ""
echo ""
echo "############################ 系统检查 ############################"
if [ -e /etc/sysconfig/i18n ];then
default_LANG="$(grep "LANG=" /etc/sysconfig/i18n | grep -v "^#" | awk -F '"' '{print $2}')"
else
default_LANG=$LANG
fi
export LANG="en_US.UTF-8"
Release=$(cat /etc/redhat-release 2>/dev/null)
Kernel=$(uname -r)
OS=$(uname -o)
Hostname=$(uname -n)
SELinux=$(/usr/sbin/sestatus | grep "SELinux status: " | awk '{print $3}')
LastReboot=$(who -b | awk '{print $3,$4}')
uptime=$(uptime | sed 's/.up ([^,]), .*/\1/')
echo " 系统：$OS"
echo " 发行版本：$Release"
echo " 内核：$Kernel"
echo " 主机名：$Hostname"
echo " SELinux：$SELinux"
echo "语言/编码：$default_LANG"
echo " 当前时间：$(date +'%F %T')"
echo " 最后启动：$LastReboot"
echo " 运行时间：$uptime"
#报表信息
report_DateTime=$(date +"%F %T") #日期
report_Hostname="$Hostname" #主机名
report_OSRelease="$Release" #发行版本
report_Kernel="$Kernel" #内核
report_Language="$default_LANG" #语言/编码
report_LastReboot="$LastReboot" #最近启动时间
report_Uptime="$uptime" #运行时间（天）
report_Selinux="$SELinux"
export LANG="$default_LANG"

}

function getServiceStatus(){
echo ""
echo ""
echo "############################ 服务检查 ############################"
echo ""
if [[ $centosVersion > 7 ]];then
conf=$(systemctl list-unit-files --type=service --state=enabled --no-pager | grep "enabled")
process=$(systemctl list-units --type=service --state=running --no-pager | grep ".service")
#报表信息
report_SelfInitiatedService="$(echo "$conf" | wc -l)" #自启动服务数量
report_RuningService="$(echo "$process" | wc -l)" #运行中服务数量
else
conf=$(/sbin/chkconfig | grep -E ":on|:启用")
process=$(/sbin/service --status-all 2>/dev/null | grep -E "is running|正在运行")
#报表信息
report_SelfInitiatedService="$(echo "$conf" | wc -l)" #自启动服务数量
report_RuningService="$(echo "$process" | wc -l)" #运行中服务数量
fi
echo "服务配置"
echo "--------"
echo "$conf" | column -t
echo ""
echo "正在运行的服务"
echo "--------------"
echo "$process"

}

function getAutoStartStatus(){
echo ""
echo ""
echo "############################ 自启动检查 ##########################"
conf=$(grep -v "^#" /etc/rc.d/rc.local| sed '/^$/d')
echo "$conf"
#报表信息
report_SelfInitiatedProgram="$(echo $conf | wc -l)" #自启动程序数量
}

function getLoginStatus(){
echo ""
echo ""
echo "############################ 登录检查 ############################"
last | head
}

function getNetworkStatus(){
echo ""
echo ""
echo "############################ 网络检查 ############################"
if [[ $centosVersion < 7 ]];then
/sbin/ifconfig -a | grep -v packets | grep -v collisions | grep -v inet6
else
#ip a
for i in $(ip link | grep BROADCAST | awk -F: '{print $2}');do ip add show $i | grep -E "BROADCAST|global"| awk '{print $2}' | tr '\n' ' ' ;echo "" ;done
fi
GATEWAY=$(ip route | grep default | awk '{print $3}')
DNS=$(grep nameserver /etc/resolv.conf| grep -v "#" | awk '{print $2}' | tr '\n' ',' | sed 's/,$//')
echo ""
echo "网关：$GATEWAY "
echo " DNS：$DNS"
#报表信息
IP=$(ip -f inet addr | grep -v 127.0.0.1 | grep inet | awk '{print $NF,$2}' | tr '\n' ',' | sed 's/,$//')
MAC=$(ip link | grep -v "LOOPBACK|loopback" | awk '{print $2}' | sed 'N;s/\n//' | tr '\n' ',' | sed 's/,$//')
report_IP="$IP" #IP地址
report_MAC=$MAC #MAC地址
report_Gateway="$GATEWAY" #默认网关
report_DNS="$DNS" #DNS
}

function getListenStatus(){
echo ""
echo ""
echo "############################ 监听检查 ############################"
TCPListen=$(ss -ntul | column -t)
echo "$TCPListen"
#报表信息
report_Listen="$(echo "$TCPListen"| sed '1d' | awk '/tcp/ {print $5}' | awk -F: '{print $NF}' | sort | uniq | wc -l)"
}

function getCronStatus(){
echo ""
echo ""
echo "############################ 计划任务检查 ########################"
Crontab=0
for shell in $(grep -v "/sbin/nologin" /etc/shells);do
for user in $(grep "$shell" /etc/passwd| awk -F: '{print $1}');do
crontab -l -u $user >/dev/null 2>&1
status=$?
if [ $status -eq 0 ];then
echo "$user"
echo "--------"
crontab -l -u $user
let Crontab=Crontab+$(crontab -l -u $user | wc -l)
echo ""
fi
done
done
#计划任务
find /etc/cron* -type f | xargs -i ls -l {} | column -t
let Crontab=Crontab+$(find /etc/cron* -type f | wc -l)
#报表信息
report_Crontab="$Crontab" #计划任务数
}
function getHowLongAgo(){
# 计算一个时间戳离现在有多久了
datetime="$"
[ -z "$datetime" ] && echo "错误的参数：getHowLongAgo() $"
Timestamp=$(date +%s -d "$datetime") #转化为时间戳
Now_Timestamp=$(date +%s)
Difference_Timestamp=$(($Now_Timestamp-$Timestamp))
days=0;hours=0;minutes=0;
sec_in_day=$((606024));
sec_in_hour=$((60*60));
sec_in_minute=60
while (( $(($Difference_Timestamp-$sec_in_day)) > 1 ))
do
let Difference_Timestamp=Difference_Timestamp-sec_in_day
let days++
done
while (( $(($Difference_Timestamp-$sec_in_hour)) > 1 ))
do
let Difference_Timestamp=Difference_Timestamp-sec_in_hour
let hours++
done
echo "$days 天 $hours 小时前"
}

function getUserLastLogin(){
# 获取用户最近一次登录的时间，含年份
# 很遗憾last命令不支持显示年份，只有"last -t YYYYMMDDHHMMSS"表示某个时间之间的登录，我
# 们只能用最笨的方法了，对比今天之前和今年元旦之前（或者去年之前和前年之前……）某个用户
# 登录次数，如果登录统计次数有变化，则说明最近一次登录是今年。
username=$1
: ${username:="whoami"}
thisYear=$(date +%Y)
oldesYear=$(last | tail -n1 | awk '{print $NF}')
while(( $thisYear >= $oldesYear));do
loginBeforeToday=$(last $username | grep $username | wc -l)
loginBeforeNewYearsDayOfThisYear=$(last $username -t $thisYear"0101000000" | grep $username | wc -l)
if [ $loginBeforeToday -eq 0 ];then
echo "从未登录过"
break
elif [ $loginBeforeToday -gt $loginBeforeNewYearsDayOfThisYear ];then
lastDateTime=$(last -i $username | head -n1 | awk '{for(i=4;i<(NF-2);i++)printf"%s ",$i}')" $thisYear" #格式如: Sat Nov 2 20:33 2015
lastDateTime=$(date "+%Y-%m-%d %H:%M:%S" -d "$lastDateTime")
echo "$lastDateTime"
break
else
thisYear=$((thisYear-1))
fi
done

}

function getUserStatus(){
echo ""
echo ""
echo "############################ 用户检查 ############################"
#/etc/passwd 最后修改时间
pwdfile="$(cat /etc/passwd)"
Modify=$(stat /etc/passwd | grep Modify | tr '.' ' ' | awk '{print $2,$3}')

echo "/etc/passwd 最后修改时间：$Modify ($(getHowLongAgo $Modify))"
echo ""
echo "特权用户"
echo "--------"
RootUser=""
for user in $(echo "$pwdfile" | awk -F: '{print $1}');do
    if [ $(id -u $user) -eq 0 ];then
        echo "$user"
        RootUser="$RootUser,$user"
    fi
done
echo ""
echo "用户列表"
echo "--------"
USERs=0
echo "$(
echo "用户名 UID GID HOME SHELL 最后一次登录"
for shell in $(grep -v "/sbin/nologin" /etc/shells);do
    for username in $(grep "$shell" /etc/passwd| awk -F: '{print $1}');do
        userLastLogin="$(getUserLastLogin $username)"
        echo "$pwdfile" | grep -w "$username" |grep -w "$shell"| awk -F: -v lastlogin="$(echo "$userLastLogin" | tr ' ' '_')" '{print $1,$3,$4,$6,$7,lastlogin}'
    done
    let USERs=USERs+$(echo "$pwdfile" | grep "$shell"| wc -l)
done
)" | column -t
echo ""
echo "空密码用户"
echo "----------"
USEREmptyPassword=""
for shell in $(grep -v "/sbin/nologin" /etc/shells);do
        for user in $(echo "$pwdfile" | grep "$shell" | cut -d: -f1);do
        r=$(awk -F: '$2=="!!"{print $1}' /etc/shadow | grep -w $user)
        if [ ! -z $r ];then
            echo $r
            USEREmptyPassword="$USEREmptyPassword,"$r
        fi
    done    
done
echo ""
echo "相同ID的用户"
echo "------------"
USERTheSameUID=""
UIDs=$(cut -d: -f3 /etc/passwd | sort | uniq -c | awk '$1>1{print $2}')
for uid in $UIDs;do
    echo -n "$uid";
    USERTheSameUID="$uid"
    r=$(awk -F: 'ORS="";$3=='"$uid"'{print ":",$1}' /etc/passwd)
    echo "$r"
    echo ""
    USERTheSameUID="$USERTheSameUID $r,"
done
#报表信息
report_USERs="$USERs"    #用户
report_USEREmptyPassword=$(echo $USEREmptyPassword | sed 's/^,//') 
report_USERTheSameUID=$(echo $USERTheSameUID | sed 's/,$//') 
report_RootUser=$(echo $RootUser | sed 's/^,//')    #特权用户

}

function getPasswordStatus {
echo ""
echo ""
echo "############################ 密码检查 ############################"
pwdfile="$(cat /etc/passwd)"
echo ""
echo "密码过期检查"
echo "------------"
result=""
for shell in $(grep -v "/sbin/nologin" /etc/shells);do
for user in $(echo "$pwdfile" | grep "$shell" | cut -d: -f1);do
get_expiry_date=$(/usr/bin/chage -l $user | grep 'Password expires' | cut -d: -f2)
if [[ $get_expiry_date = ' never' || $get_expiry_date = 'never' ]];then
printf "%-15s 永不过期\n" $user
result="$result,$user:never"
else
password_expiry_date=$(date -d "$get_expiry_date" "+%s")
current_date=$(date "+%s")
diff=$(($password_expiry_date-$current_date))
let DAYS=$(($diff/(606024)))
printf "%-15s %s天后过期\n" $user $DAYS
result="$result,$user:$DAYS days"
fi
done
done
report_PasswordExpiry=$(echo $result | sed 's/^,//')

echo ""
echo "密码策略检查"
echo "------------"
grep -v "#" /etc/login.defs | grep -E "PASS_MAX_DAYS|PASS_MIN_DAYS|PASS_MIN_LEN|PASS_WARN_AGE"

}

function getSudoersStatus(){
echo ""
echo ""
echo "############################ Sudoers检查 #########################"
conf=$(grep -v "^#" /etc/sudoers| grep -v "^Defaults" | sed '/^$/d')
echo "$conf"
echo ""
#报表信息
report_Sudoers="$(echo $conf | wc -l)"
}

function getInstalledStatus(){
echo ""
echo ""
echo "############################ 软件检查 ############################"
rpm -qa --last | head | column -t
}

function getProcessStatus(){
echo ""
echo ""
echo "############################ 进程检查 ############################"
if [ $(ps -ef | grep defunct | grep -v grep | wc -l) -ge 1 ];then
echo ""
echo "僵尸进程";
echo "--------"
ps -ef | head -n1
ps -ef | grep defunct | grep -v grep
fi
echo ""
echo "内存占用TOP10"
echo "-------------"
echo -e "PID %MEM RSS COMMAND
$(ps aux | awk '{print $2, $4, $6, $11}' | sort -k3rn | head -n 10 )"| column -t
echo ""
echo "CPU占用TOP10"
echo "------------"
top b -n1 | head -17 | tail -11
#报表信息
report_DefunctProsess="$(ps -ef | grep defunct | grep -v grep|wc -l)"
}

function getJDKStatus(){
echo ""
echo ""
echo "############################ JDK检查 #############################"
java -version 2>/dev/null
if [ $? -eq 0 ];then
java -version 2>&1
fi
echo "JAVA_HOME="$JAVA_HOME""
#报表信息
report_JDK="$(java -version 2>&1 | grep version | awk '{print $1,$3}' | tr -d '"')"
}
function getSyslogStatus(){
echo ""
echo ""
echo "############################ syslog检查 ##########################"
echo "服务状态：$(getState rsyslog)"
echo ""
echo "/etc/rsyslog.conf"
echo "-----------------"
cat /etc/rsyslog.conf 2>/dev/null | grep -v "^#" | grep -v "^\$" | sed '/^$/d' | column -t
#报表信息
report_Syslog="$(getState rsyslog)"
}
function getFirewallStatus(){
echo ""
echo ""
echo "############################ 防火墙检查 ##########################"
#防火墙状态，策略等
if [[ $centosVersion < 7 ]];then
/etc/init.d/iptables status >/dev/null 2>&1
status=$?
if [ $status -eq 0 ];then
s="active"
elif [ $status -eq 3 ];then
s="inactive"
elif [ $status -eq 4 ];then
s="permission denied"
else
s="unknown"
fi
else
s="$(getState iptables)"
fi
echo "iptables: $s"
echo ""
echo "/etc/sysconfig/iptables"
echo "-----------------------"
cat /etc/sysconfig/iptables 2>/dev/null
#报表信息
report_Firewall="$s"
}

function getSNMPStatus(){
#SNMP服务状态，配置等
echo ""
echo ""
echo "############################ SNMP检查 ############################"
status="$(getState snmpd)"
echo "服务状态：$status"
echo ""
if [ -e /etc/snmp/snmpd.conf ];then
echo "/etc/snmp/snmpd.conf"
echo "--------------------"
cat /etc/snmp/snmpd.conf 2>/dev/null | grep -v "^#" | sed '/^$/d'
fi
#报表信息
report_SNMP="$(getState snmpd)"
}

function getState(){
if [[ $centosVersion < 7 ]];then
if [ -e "/etc/init.d/$1" ];then
if [ /etc/init.d/$1 status 2>/dev/null | grep -E "is running|正在运行" | wc -l -ge 1 ];then
r="active"
else
r="inactive"
fi
else
r="unknown"
fi
else
#CentOS 7+
r="$(systemctl is-active $1 2>&1)"
fi
echo "$r"
}

function getSSHStatus(){
#SSHD服务状态，配置,受信任主机等
echo ""
echo ""
echo "############################ SSH检查 #############################"
#检查受信任主机
pwdfile="$(cat /etc/passwd)"
echo "服务状态：$(getState sshd)"
Protocol_Version=$(cat /etc/ssh/sshd_config | grep Protocol | awk '{print $2}')
echo "SSH协议版本：$Protocol_Version"
echo ""
echo "信任主机"
echo "--------"
authorized=0
for user in $(echo "$pwdfile" | grep /bin/bash | awk -F: '{print $1}');do
authorize_file=$(echo "$pwdfile" | grep -w $user | awk -F: '{printf $6"/.ssh/authorized_keys"}')
authorized_host=$(cat $authorize_file 2>/dev/null | awk '{print $3}' | tr '\n' ',' | sed 's/,$//')
if [ ! -z $authorized_host ];then
echo "$user 授权 "$authorized_host" 无密码访问"
fi
let authorized=authorized+$(cat $authorize_file 2>/dev/null | awk '{print $3}'|wc -l)
done

echo ""
echo "是否允许ROOT远程登录"
echo "--------------------"
config=$(cat /etc/ssh/sshd_config | grep PermitRootLogin)
firstChar=${config:0:1}
if [ $firstChar == "#" ];then
    PermitRootLogin="yes"  #默认是允许ROOT远程登录的
else
    PermitRootLogin=$(echo $config | awk '{print $2}')
fi
echo "PermitRootLogin $PermitRootLogin"

echo ""
echo "/etc/ssh/sshd_config"
echo "--------------------"
cat /etc/ssh/sshd_config | grep -v "^#" | sed '/^$/d'

#报表信息
report_SSHAuthorized="$authorized"    #SSH信任主机
report_SSHDProtocolVersion="$Protocol_Version"    #SSH协议版本
report_SSHDPermitRootLogin="$PermitRootLogin"    #允许root远程登录

}
function getNTPStatus(){
#NTP服务状态，当前时间，配置等
echo ""
echo ""
echo "############################ NTP检查 #############################"
if [ -e /etc/ntp.conf ];then
echo "服务状态：$(getState ntpd)"
echo ""
echo "/etc/ntp.conf"
echo "-------------"
cat /etc/ntp.conf 2>/dev/null | grep -v "^#" | sed '/^$/d'
fi
#报表信息
report_NTP="$(getState ntpd)"
}

function uploadHostDailyCheckReport(){
json="{
"DateTime":"$report_DateTime",
"Hostname":"$report_Hostname",
"OSRelease":"$report_OSRelease",
"Kernel":"$report_Kernel",
"Language":"$report_Language",
"LastReboot":"$report_LastReboot",
"Uptime":"$report_Uptime",
"CPUs":"$report_CPUs",
"CPUType":"$report_CPUType",
"Arch":"$report_Arch",
"MemTotal":"$report_MemTotal",
"MemFree":"$report_MemFree",
"MemUsedPercent":"$report_MemUsedPercent",
"DiskTotal":"$report_DiskTotal",
"DiskFree":"$report_DiskFree",
"DiskUsedPercent":"$report_DiskUsedPercent",
"InodeTotal":"$report_InodeTotal",
"InodeFree":"$report_InodeFree",
"InodeUsedPercent":"$report_InodeUsedPercent",
"IP":"$report_IP",
"MAC":"$report_MAC",
"Gateway":"$report_Gateway",
"DNS":"$report_DNS",
"Listen":"$report_Listen",
"Selinux":"$report_Selinux",
"Firewall":"$report_Firewall",
"USERs":"$report_USERs",
"USEREmptyPassword":"$report_USEREmptyPassword",
"USERTheSameUID":"$report_USERTheSameUID",
"PasswordExpiry":"$report_PasswordExpiry",
"RootUser":"$report_RootUser",
"Sudoers":"$report_Sudoers",
"SSHAuthorized":"$report_SSHAuthorized",
"SSHDProtocolVersion":"$report_SSHDProtocolVersion",
"SSHDPermitRootLogin":"$report_SSHDPermitRootLogin",
"DefunctProsess":"$report_DefunctProsess",
"SelfInitiatedService":"$report_SelfInitiatedService",
"SelfInitiatedProgram":"$report_SelfInitiatedProgram",
"RuningService":"$report_RuningService",
"Crontab":"$report_Crontab",
"Syslog":"$report_Syslog",
"SNMP":"$report_SNMP",
"NTP":"$report_NTP",
"JDK":"$report_JDK"
}"
#echo "$json"
curl -l -H "Content-type: application/json" -X POST -d "$json" "$uploadHostDailyCheckReportApi" 2>/dev/null
}

function check(){
version
getSystemStatus
getCpuStatus
getMemStatus
getDiskStatus
getNetworkStatus
getListenStatus
getProcessStatus
getServiceStatus
getAutoStartStatus
getLoginStatus
getCronStatus
getUserStatus
getPasswordStatus
getSudoersStatus
getJDKStatus
getFirewallStatus
getSSHStatus
getSyslogStatus
getSNMPStatus
getNTPStatus
getInstalledStatus
}

执行检查并保存检查结果

check > $RESULTFILE

echo "检查结果：$RESULTFILE"

上传检查结果的文件

curl -F "filename=@$RESULTFILE" "$uploadHostDailyCheckApi" 2>/dev/null

上传检查结果的报表

uploadHostDailyCheckReport 1>/dev/null

©著作权归作者所有,转载或内容合作请联系作者
  • 人面猴
    序言：七十年代末，一起剥皮案震惊了整个滨河市，随后出现的几起案子，更是在滨河造成了极大的恐慌，老刑警刘岩，带你破解...
    沈念sama阅读 206,126评论 6赞 481
  • 死咒
    序言：滨河连续发生了三起死亡事件，死亡现场离奇诡异，居然都是意外死亡，警方通过查阅死者的电脑和手机，发现死者居然都...
    沈念sama阅读 88,254评论 2赞 382
  • 救了他两次的神仙让他今天三更去死
    文/潘晓璐 我一进店门，熙熙楼的掌柜王于贵愁眉苦脸地迎上来，“玉大人，你说我怎么就摊上这事。” “怎么了？”我有些...
    开封第一讲书人阅读 152,445评论 0赞 341
  • 道士缉凶录：失踪的卖姜人
    文/不坏的土叔 我叫张陵，是天一观的道长。 经常有香客问我，道长，这世上最难降的妖魔是什么？ 我笑而不...
    开封第一讲书人阅读 55,185评论 1赞 278
  • 港岛之恋（遗憾婚礼）
    正文 为了忘掉前任，我火速办了婚礼，结果婚礼上，老公的妹妹穿的比我还像新娘。我一直安慰自己，他们只是感情好，可当我...
    茶点故事阅读 64,178评论 5赞 371
  • 恶毒庶女顶嫁案：这布局不是一般人想出来的
    文/花漫 我一把揭开白布。 她就那样静静地躺着，像睡着了一般。 火红的嫁衣衬着肌肤如雪。 梳的纹丝不乱的头发上，一...
    开封第一讲书人阅读 48,970评论 1赞 284
  • 城市分裂传说
    那天，我揣着相机与录音，去河边找鬼。 笑死，一个胖子当着我的面吹牛，可吹牛的内容都是我干的。 我是一名探鬼主播，决...
    沈念sama阅读 38,276评论 3赞 399
  • 双鸳鸯连环套：你想象不到人心有多黑
    文/苍兰香墨 我猛地睁开眼，长吁一口气：“原来是场噩梦啊……” “哼！你这毒妇竟也来了？” 一声冷哼从身侧响起，我...
    开封第一讲书人阅读 36,927评论 0赞 259
  • 万荣杀人案实录
    序言：老挝万荣一对情侣失踪，失踪者是张志新（化名）和其女友刘颖，没想到半个月后，有当地人在树林里发现了一具尸体，经...
    沈念sama阅读 43,400评论 1赞 300
  • 护林员之死
    正文 独居荒郊野岭守林人离奇死亡，尸身上长有42处带血的脓包…… 初始之章·张勋 以下内容为张勋视角 年9月15日...
    茶点故事阅读 35,883评论 2赞 323
  • 白月光启示录
    正文 我和宋清朗相恋三年，在试婚纱的时候发现自己被绿了。 大学时的朋友给我发了我未婚夫和他白月光在一起吃饭的照片。...
    茶点故事阅读 37,997评论 1赞 333
  • 活死人
    序言：一个原本活蹦乱跳的男人离奇死亡，死状恐怖，灵堂内的尸体忽然破棺而出，到底是诈尸还是另有隐情，我是刑警宁泽，带...
    沈念sama阅读 33,646评论 4赞 322
  • 日本核电站爆炸内幕
    正文 年R本政府宣布，位于F岛的核电站，受9级特大地震影响，放射性物质发生泄漏。R本人自食恶果不足惜，却给世界环境...
    茶点故事阅读 39,213评论 3赞 307
  • 男人毒药：我在死后第九天来索命
    文/蒙蒙 一、第九天 我趴在偏房一处隐蔽的房顶上张望。 院中可真热闹，春花似锦、人声如沸。这庄子的主人今日做“春日...
    开封第一讲书人阅读 30,204评论 0赞 19
  • 一桩弑父案，背后竟有这般阴谋
    文/苍兰香墨 我抬头看了看天上的太阳。三九已至，却和暖如春，着一层夹袄步出监牢的瞬间，已是汗流浃背。 一阵脚步声响...
    开封第一讲书人阅读 31,423评论 1赞 260
  • 情欲美人皮
    我被黑心中介骗来泰国打工， 没想到刚下飞机就差点儿被人妖公主榨干…… 1. 我叫王不留，地道东北人。 一个月前我还...
    沈念sama阅读 45,423评论 2赞 352
  • 代替公主和亲
    正文 我出身青楼，却偏偏与公主长得像，于是被迫代替她去往敌国和亲。 传闻我的和亲对象是个残疾皇子，可洞房花烛夜当晚...
    茶点故事阅读 42,722评论 2赞 345

推荐阅读更多精彩内容