iOS视频采集实战(AVCaptureSession)

需求：使用AVFoundation中的AVCaptureSession实现设置相机的分辨率，帧率(包括高帧率), 切换前后置摄像头，对焦，屏幕旋转，调节曝光度...

阅读前提:

GitHub地址(附代码) : iOS视频采集实战(AVCaptureSession)

简书地址 : iOS视频采集实战(AVCaptureSession)

博客地址 : iOS视频采集实战(AVCaptureSession)

掘金地址 : iOS视频采集实战(AVCaptureSession)

1. 设置分辨率与帧率

1.1. 低帧率模式(fps <= 30)

在要求帧率小于等于30帧的情况下,相机设置分辨率与帧率的方法是单独的,即设置帧率是帧率的方法,设置分辨率是分辨率的方法,两者没有绑定.

  • 设置分辨率

    使用此方法可以设置相机分辨率,可以设置的类型可以直接跳转进API文档处自行选择,目前支持最大的是3840*2160,如果不要求相机帧率大于30帧,此方法可以适用于你.

- (void)setCameraResolutionByPresetWithHeight:(int)height session:(AVCaptureSession *)session {
    /*
     Note: the method only support your frame rate <= 30 because we must use `activeFormat` when frame rate > 30, the `activeFormat` and `sessionPreset` are exclusive
     */
    AVCaptureSessionPreset preset = [self getSessionPresetByResolutionHeight:height];
    if ([session.sessionPreset isEqualToString:preset]) {
        NSLog(@"Needn't to set camera resolution repeatly !");
        return;
    }
    
    if (![session canSetSessionPreset:preset]) {
        NSLog(@"Can't set the sessionPreset !");
        return;
    }
    
    [session beginConfiguration];
    session.sessionPreset = preset;
    [session commitConfiguration];
}

  • 设置帧率

    使用此方法可以设置相机帧率,仅支持帧率小于等于30帧.

- (void)setCameraForLFRWithFrameRate:(int)frameRate {
    // Only for frame rate <= 30
    AVCaptureDevice *captureDevice = [AVCaptureDevice defaultDeviceWithMediaType:AVMediaTypeVideo];
    [captureDevice lockForConfiguration:NULL];
    [captureDevice setActiveVideoMinFrameDuration:CMTimeMake(1, frameRate)];
    [captureDevice setActiveVideoMaxFrameDuration:CMTimeMake(1, frameRate)];
    [captureDevice unlockForConfiguration];
}
1.2. 高帧率模式(fps > 30)

如果需要对某一分辨率支持高帧率的设置,如50帧,60帧,120帧...,原先setActiveVideoMinFrameDuration与setActiveVideoMaxFrameDuration是无法做到的,Apple规定我们需要使用新的方法设置帧率setActiveVideoMinFrameDuration与setActiveVideoMaxFrameDuration,并且该方法必须配合新的设置分辨率activeFormat的方法一起使用.

新的设置分辨率的方法activeFormat与sessionPreset是互斥的，如果使用了一个, 另一个会失效,建议直接使用高帧率的设置方法，废弃低帧率下设置方法，避免产生兼容问题。

Apple在更新方法后将原先分离的分辨率与帧率的设置方法合二为一,原先是单独设置相机分辨率与帧率,而现在则需要一起设置,即每个分辨率有其对应支持的帧率范围,每个帧率也有其支持的分辨率,需要我们遍历来查询,所以原先统一的单独的设置分辨率与帧率的方法在高帧率模式下相当于弃用,可以根据项目需求选择,如果确定项目不会支持高帧率(fps>30),可以使用以前的方法,简单且有效.

注意: 使用activeFormat方法后,之前使用sessionPreset方法设置的分辨率将自动变为AVCaptureSessionPresetInputPriority,所以如果项目之前有用canSetSessionPreset比较的if语句也都将失效,建议如果项目必须支持高帧率则彻底启用sessionPreset方法.

+ (BOOL)setCameraFrameRateAndResolutionWithFrameRate:(int)frameRate andResolutionHeight:(CGFloat)resolutionHeight bySession:(AVCaptureSession *)session position:(AVCaptureDevicePosition)position videoFormat:(OSType)videoFormat {
    AVCaptureDevice *captureDevice = [self getCaptureDevicePosition:position];
    
    BOOL isSuccess = NO;
    for(AVCaptureDeviceFormat *vFormat in [captureDevice formats]) {
        CMFormatDescriptionRef description = vFormat.formatDescription;
        float maxRate = ((AVFrameRateRange*) [vFormat.videoSupportedFrameRateRanges objectAtIndex:0]).maxFrameRate;
        if (maxRate >= frameRate && CMFormatDescriptionGetMediaSubType(description) == videoFormat) {
            if ([captureDevice lockForConfiguration:NULL] == YES) {
                // 对比镜头支持的分辨率和当前设置的分辨率
                CMVideoDimensions dims = CMVideoFormatDescriptionGetDimensions(description);
                if (dims.height == resolutionHeight && dims.width == [self getResolutionWidthByHeight:resolutionHeight]) {
                    [session beginConfiguration];
                    if ([captureDevice lockForConfiguration:NULL]){
                        captureDevice.activeFormat = vFormat;
                        [captureDevice setActiveVideoMinFrameDuration:CMTimeMake(1, frameRate)];
                        [captureDevice setActiveVideoMaxFrameDuration:CMTimeMake(1, frameRate)];
                        [captureDevice unlockForConfiguration];
                    }
                    [session commitConfiguration];
                    
                    return YES;
                }
            }else {
                NSLog(@"%s: lock failed!",__func__);
            }
        }
    }
    
    NSLog(@"Set camera frame is success : %d, frame rate is %lu, resolution height = %f",isSuccess,(unsigned long)frameRate,resolutionHeight);
    return NO;
}

+ (AVCaptureDevice *)getCaptureDevicePosition:(AVCaptureDevicePosition)position {
    NSArray *devices = nil;
    
    if (@available(iOS 10.0, *)) {
        AVCaptureDeviceDiscoverySession *deviceDiscoverySession =  [AVCaptureDeviceDiscoverySession discoverySessionWithDeviceTypes:@[AVCaptureDeviceTypeBuiltInWideAngleCamera] mediaType:AVMediaTypeVideo position:position];
        devices = deviceDiscoverySession.devices;
    } else {
#pragma clang diagnostic push
#pragma clang diagnostic ignored "-Wdeprecated-declarations"
        devices = [AVCaptureDevice devicesWithMediaType:AVMediaTypeVideo];
#pragma clang diagnostic pop
    }
    
    for (AVCaptureDevice *device in devices) {
        if (position == device.position) {
            return device;
        }
    }
    return NULL;
}

2. 前后置摄像头切换

切换前后置摄像头，看似简单，实际应用中会产生很多问题，因为同一部设备前后置摄像头支持的分辨率帧率的值是不同的，所以如果从支持切向不支持就会产生问题,具体案例如下

比如iPhoneX, 后置摄像头最大支持(4K,60fps),前置摄像头最大支持(2K,30fps),当使用(4K,60fps)后置摄像头切到前置摄像头如果不做处理则无法切换,程序错乱.

注意

下面代码中我们这行代码session.sessionPreset = AVCaptureSessionPresetLow;,因为从后置切到前置我们需要重新计算当前输入设备支持最大的分辨率与帧率,而输入设备如果不先添加上去我们无法计算,所以在这里先随便设置一个可接受的分辨率以使我们可以把输入设备添加,之后在求出当前设备最大支持的分辨率与帧率后再重新设置分辨率与帧率.

- (void)setCameraPosition:(AVCaptureDevicePosition)position session:(AVCaptureSession *)session input:(AVCaptureDeviceInput *)input videoFormat:(OSType)videoFormat resolutionHeight:(CGFloat)resolutionHeight frameRate:(int)frameRate {
    if (input) {
        [session beginConfiguration];
        [session removeInput:input];
        
        AVCaptureDevice *device = [self.class getCaptureDevicePosition:position];
        
        NSError *error = nil;
        AVCaptureDeviceInput *newInput = [AVCaptureDeviceInput deviceInputWithDevice:device
                                                                               error:&error];
        
        if (error != noErr) {
            NSLog(@"%s: error:%@",__func__, error.localizedDescription);
            return;
        }
        
        // 比如: 后置是4K, 前置最多支持2K,此时切换需要降级, 而如果不先把Input添加到session中,我们无法计算当前摄像头支持的最大分辨率
        session.sessionPreset = AVCaptureSessionPresetLow;
        if ([session canAddInput:newInput])  {
            self.input = newInput;
            [session addInput:newInput];
        }else {
            NSLog(@"%s: add input failed.",__func__);
            return;
        }
        
        int maxResolutionHeight = [self getMaxSupportResolutionByPreset];
        if (resolutionHeight > maxResolutionHeight) {
            resolutionHeight = maxResolutionHeight;
            self.cameraModel.resolutionHeight = resolutionHeight;
            NSLog(@"%s: Current support max resolution height = %d", __func__, maxResolutionHeight);
        }
        
        int maxFrameRate = [self getMaxFrameRateByCurrentResolution];
        if (frameRate > maxFrameRate) {
            frameRate = maxFrameRate;
            self.cameraModel.frameRate = frameRate;
            NSLog(@"%s: Current support max frame rate = %d",__func__, maxFrameRate);
        }

        BOOL isSuccess = [self.class setCameraFrameRateAndResolutionWithFrameRate:frameRate
                                                              andResolutionHeight:resolutionHeight
                                                                        bySession:session
                                                                         position:position
                                                                      videoFormat:videoFormat];
        
        if (!isSuccess) {
            NSLog(@"%s: Set resolution and frame rate failed.",__func__);
        }
        
        [session commitConfiguration];
    }
}

3.屏幕视频方向切换

我们在这里首先要区分下屏幕方向与视频方向的概念,一个是用来表示设备方向(UIDeviceOrientation),一个是用来表示视频方向(AVCaptureVideoOrientation). 我们使用的AVCaptureSession,如果要支持屏幕旋转,需要在屏幕旋转的同时将我们的视频画面也进行旋转.

屏幕方向的旋转可以通过通知UIDeviceOrientationDidChangeNotification接收,这里不做过多说明.

- (void)adjustVideoOrientationByScreenOrientation:(UIDeviceOrientation)orientation previewFrame:(CGRect)previewFrame previewLayer:(AVCaptureVideoPreviewLayer *)previewLayer videoOutput:(AVCaptureVideoDataOutput *)videoOutput {
    [previewLayer setFrame:previewFrame];
    
    switch (orientation) {
        case UIInterfaceOrientationPortrait:
            [self adjustAVOutputDataOrientation:AVCaptureVideoOrientationPortrait
                                    videoOutput:videoOutput];
            break;
        case UIInterfaceOrientationPortraitUpsideDown:
            [self adjustAVOutputDataOrientation:AVCaptureVideoOrientationPortraitUpsideDown
                                    videoOutput:videoOutput];
            break;
        case UIInterfaceOrientationLandscapeLeft:
            [[previewLayer connection] setVideoOrientation:AVCaptureVideoOrientationLandscapeLeft];
            [self adjustAVOutputDataOrientation:AVCaptureVideoOrientationLandscapeLeft
                                    videoOutput:videoOutput];
            break;
        case UIInterfaceOrientationLandscapeRight:
            [[previewLayer connection] setVideoOrientation:AVCaptureVideoOrientationLandscapeRight];
            [self adjustAVOutputDataOrientation:AVCaptureVideoOrientationLandscapeRight
                                    videoOutput:videoOutput];
            break;
            
        default:
            break;
            
    }
}

-(void)adjustAVOutputDataOrientation:(AVCaptureVideoOrientation)orientation videoOutput:(AVCaptureVideoDataOutput *)videoOutput {
    for(AVCaptureConnection *connection in videoOutput.connections) {
        for(AVCaptureInputPort *port in [connection inputPorts]) {
            if([[port mediaType] isEqual:AVMediaTypeVideo]) {
                if([connection isVideoOrientationSupported]) {
                    [connection setVideoOrientation:orientation];
                }
            }
        }
    }
}

4.对焦调节

关于对焦,我们需要特别说明手动设置对焦点进行对焦,因为对焦方法仅接受以左上角为(0,0),右下角为(1,1)的坐标系,所以我们需要对UIView的坐标系进行转换,但是转换需要分为多种情况,如下

  • 视频是否以镜像模式输出: 如前置摄像头可能会开启镜像模式(x,y坐标是反的)
  • 屏幕方向是以Home在右还是在左: 在右的话是以左上角为原点,在左的话则是以右下角为原点.
  • 视频渲染方式: 是保持分辨率比例,还是填充模式,因为手机型号不同,所以可能是填充黑边,可能超出屏幕,需要重新计算对焦点.

如果我们是直接使用AVCaptureSession的AVCaptureVideoPreviewLayer做渲染,我们可以使用captureDevicePointOfInterestForPoint方法自动计算,此结果会考虑上面所有情况.但如果我们是自己对屏幕做渲染,则需要自己计算对焦点,上面的情况都需要考虑. 下面提供自动与手动计算两种方法.

- (void)autoFocusAtPoint:(CGPoint)point {
    AVCaptureDevice *device = self.input.device;
    if ([device isFocusPointOfInterestSupported] && [device isFocusModeSupported:AVCaptureFocusModeAutoFocus]) {
        NSError *error;
        if ([device lockForConfiguration:&error]) {
            [device setExposurePointOfInterest:point];
            [device setExposureMode:AVCaptureExposureModeContinuousAutoExposure];
            [device setFocusPointOfInterest:point];
            [device setFocusMode:AVCaptureFocusModeAutoFocus];
            [device unlockForConfiguration];
        }
    }
}
4.1. 自动计算对焦点
- (CGPoint)convertToPointOfInterestFromViewCoordinates:(CGPoint)viewCoordinates captureVideoPreviewLayer:(AVCaptureVideoPreviewLayer *)captureVideoPreviewLayer {
    CGPoint pointOfInterest = CGPointMake(.5f, .5f);
    CGSize frameSize = [captureVideoPreviewLayer frame].size;
    
    if ([captureVideoPreviewLayer.connection isVideoMirrored]) {
        viewCoordinates.x = frameSize.width - viewCoordinates.x;
    }

    // Convert UIKit coordinate to Focus Point(0.0~1.1)
    pointOfInterest = [captureVideoPreviewLayer captureDevicePointOfInterestForPoint:viewCoordinates];
    
    // NSLog(@"Focus - Auto test: %@",NSStringFromCGPoint(pointOfInterest));
    
    return pointOfInterest;
}
4.2. 手动计算对焦点
  • 如果手机屏幕尺寸与分辨率比例完全吻合,则直接将坐标系转为(0,0)到(1,1)即可
  • 如果屏幕尺寸比例与分辨率比例不同,需要进一步分析视频渲染方式来计算,如果是保持分辨率,则肯定会留下黑边,我们在计算对焦点时需要减去黑边长度,如果是以分辨率比例填充屏幕则会牺牲一部分像素,我们在计算对焦点时同样需要加上牺牲的像素.
- (CGPoint)manualConvertFocusPoint:(CGPoint)point frameSize:(CGSize)frameSize captureVideoPreviewLayer:(AVCaptureVideoPreviewLayer *)captureVideoPreviewLayer position:(AVCaptureDevicePosition)position videoDataOutput:(AVCaptureVideoDataOutput *)videoDataOutput input:(AVCaptureDeviceInput *)input {
    CGPoint pointOfInterest = CGPointMake(.5f, .5f);
    
    if ([[videoDataOutput connectionWithMediaType:AVMediaTypeVideo] isVideoMirrored]) {
        point.x = frameSize.width - point.x;
    }
    
    for (AVCaptureInputPort *port in [input ports]) {
        if ([port mediaType] == AVMediaTypeVideo) {
            CGRect cleanAperture = CMVideoFormatDescriptionGetCleanAperture([port formatDescription], YES);
            CGSize resolutionSize = cleanAperture.size;
            
            CGFloat resolutionRatio = resolutionSize.width / resolutionSize.height;
            CGFloat screenSizeRatio = frameSize.width / frameSize.height;
            CGFloat xc = .5f;
            CGFloat yc = .5f;
        
            if (resolutionRatio == screenSizeRatio) {
                xc = point.x / frameSize.width;
                yc = point.y / frameSize.height;
            }else if (resolutionRatio > screenSizeRatio) {
                if ([[captureVideoPreviewLayer videoGravity] isEqualToString:AVLayerVideoGravityResizeAspectFill]) {
                    CGFloat needScreenWidth = resolutionRatio * frameSize.height;
                    CGFloat cropWidth = (needScreenWidth - frameSize.width) / 2;
                    xc = (cropWidth + point.x) / needScreenWidth;
                    yc = point.y / frameSize.height;
                }else if ([[captureVideoPreviewLayer videoGravity] isEqualToString:AVLayerVideoGravityResizeAspect]){
                    CGFloat needScreenHeight = frameSize.width * (1/resolutionRatio);
                    CGFloat blackBarLength   = (frameSize.height - needScreenHeight) / 2;
                    xc = point.x / frameSize.width;
                    yc = (point.y - blackBarLength) / needScreenHeight;
                }else if ([[captureVideoPreviewLayer videoGravity] isEqualToString:AVLayerVideoGravityResize]) {
                    xc = point.x / frameSize.width;
                    yc = point.y / frameSize.height;
                }
            }else {
                if ([[captureVideoPreviewLayer videoGravity] isEqualToString:AVLayerVideoGravityResizeAspectFill]) {
                    CGFloat needScreenHeight = (1/resolutionRatio) * frameSize.width;
                    CGFloat cropHeight = (needScreenHeight - frameSize.height) / 2;
                    xc = point.x / frameSize.width;
                    yc = (cropHeight + point.y) / needScreenHeight;
                }else if ([[captureVideoPreviewLayer videoGravity] isEqualToString:AVLayerVideoGravityResizeAspect]){
                    CGFloat needScreenWidth = frameSize.height * resolutionRatio;
                    CGFloat blackBarLength   = (frameSize.width - needScreenWidth) / 2;
                    xc = (point.x - blackBarLength) / needScreenWidth;
                    yc = point.y / frameSize.height;
                }else if ([[captureVideoPreviewLayer videoGravity] isEqualToString:AVLayerVideoGravityResize]) {
                    xc = point.x / frameSize.width;
                    yc = point.y / frameSize.height;
                }
            }
            pointOfInterest = CGPointMake(xc, yc);
        }
    }
    
    if (position == AVCaptureDevicePositionBack) {
        if (captureVideoPreviewLayer.connection.videoOrientation == AVCaptureVideoOrientationLandscapeLeft) {
            pointOfInterest = CGPointMake(1-pointOfInterest.x, 1-pointOfInterest.y);
        }
    }else {
        pointOfInterest = CGPointMake(pointOfInterest.x, 1-pointOfInterest.y);
    }
    
    //NSLog(@"Focus - manu test: %@",NSStringFromCGPoint(pointOfInterest));
    return pointOfInterest;
}

5.曝光调节

如果我们是以UISlider作为调节控件,最简单的做法可以将其范围设置的与曝光度值的范围相同,即(-8~8),这样无需转换值,直接传入即可,如果是手势或是其他控件可根据需求自行调整.较为简单,不再叙述.

- (void)setExposureWithNewValue:(CGFloat)newExposureValue device:(AVCaptureDevice *)device {
    NSError *error;
    if ([device lockForConfiguration:&error]) {
        [device setExposureTargetBias:newExposureValue completionHandler:nil];
        [device unlockForConfiguration];
    }
}

6.手电筒模式

  • AVCaptureTorchModeAuto: 自动
  • AVCaptureTorchModeOn: 打开
  • AVCaptureTorchModeOff: 关闭
- (void)setTorchState:(BOOL)isOpen device:(AVCaptureDevice *)device {
    if ([device hasTorch]) {
        NSError *error;
        [device lockForConfiguration:&error];
        device.torchMode = isOpen ? AVCaptureTorchModeOn : AVCaptureTorchModeOff;
        [device unlockForConfiguration];
    }else {
        NSLog(@"The device not support torch!");
    }
}

7.视频稳定性调节

注意: 部分机型,部分分辨率使用此属性渲染可能会出现问题 (iphone xs, 自己渲染)

-(void)adjustVideoStabilizationWithOutput:(AVCaptureVideoDataOutput *)output {
    NSArray *devices = nil;
    
    if (@available(iOS 10.0, *)) {
        AVCaptureDeviceDiscoverySession *deviceDiscoverySession =  [AVCaptureDeviceDiscoverySession discoverySessionWithDeviceTypes:@[AVCaptureDeviceTypeBuiltInWideAngleCamera] mediaType:AVMediaTypeVideo position:self.cameraModel.position];
        devices = deviceDiscoverySession.devices;
    } else {
#pragma clang diagnostic push
#pragma clang diagnostic ignored "-Wdeprecated-declarations"
        devices = [AVCaptureDevice devicesWithMediaType:AVMediaTypeVideo];
#pragma clang diagnostic pop
    }
    
    for(AVCaptureDevice *device in devices){
        if([device hasMediaType:AVMediaTypeVideo]){
            if([device.activeFormat isVideoStabilizationModeSupported:AVCaptureVideoStabilizationModeAuto]) {
                for(AVCaptureConnection *connection in output.connections) {
                    for(AVCaptureInputPort *port in [connection inputPorts]) {
                        if([[port mediaType] isEqual:AVMediaTypeVideo]) {
                            if(connection.supportsVideoStabilization) {
                                connection.preferredVideoStabilizationMode = AVCaptureVideoStabilizationModeStandard;
                                NSLog(@"activeVideoStabilizationMode = %ld",(long)connection.activeVideoStabilizationMode);
                            }else {
                                NSLog(@"connection don't support video stabilization");
                            }
                        }
                    }
                }
            }else{
                NSLog(@"device don't support video stablization");
            }
        }
    }
}

8.白平衡调节

  • temperature: 通过华氏温度调节 (-150-~250)
  • tint: 通过色调调节 (-150-~150)

注意在使用setWhiteBalanceModeLockedWithDeviceWhiteBalanceGains方法时必须比较当前的AVCaptureWhiteBalanceGains值是否在有效范围.

-(AVCaptureWhiteBalanceGains)clampGains:(AVCaptureWhiteBalanceGains)gains toMinVal:(CGFloat)minVal andMaxVal:(CGFloat)maxVal {
    AVCaptureWhiteBalanceGains tmpGains = gains;
    tmpGains.blueGain   = MAX(MIN(tmpGains.blueGain , maxVal), minVal);
    tmpGains.redGain    = MAX(MIN(tmpGains.redGain  , maxVal), minVal);
    tmpGains.greenGain  = MAX(MIN(tmpGains.greenGain, maxVal), minVal);
    
    return tmpGains;
}

-(void)setWhiteBlanceValueByTemperature:(CGFloat)temperature device:(AVCaptureDevice *)device {
    if ([device isWhiteBalanceModeSupported:AVCaptureWhiteBalanceModeLocked]) {
        [device lockForConfiguration:nil];
        AVCaptureWhiteBalanceGains currentGains = device.deviceWhiteBalanceGains;
        CGFloat currentTint = [device temperatureAndTintValuesForDeviceWhiteBalanceGains:currentGains].tint;
        AVCaptureWhiteBalanceTemperatureAndTintValues tempAndTintValues = {
            .temperature = temperature,
            .tint        = currentTint,
        };
        
        AVCaptureWhiteBalanceGains deviceGains = [device deviceWhiteBalanceGainsForTemperatureAndTintValues:tempAndTintValues];
        CGFloat maxWhiteBalanceGain = device.maxWhiteBalanceGain;
        deviceGains = [self clampGains:deviceGains toMinVal:1 andMaxVal:maxWhiteBalanceGain];
        
        [device setWhiteBalanceModeLockedWithDeviceWhiteBalanceGains:deviceGains completionHandler:nil];
        [device unlockForConfiguration];
    }
}

-(void)setWhiteBlanceValueByTint:(CGFloat)tint device:(AVCaptureDevice *)device {
    if ([device isWhiteBalanceModeSupported:AVCaptureWhiteBalanceModeLocked]) {
        [device lockForConfiguration:nil];
        CGFloat maxWhiteBalaceGain = device.maxWhiteBalanceGain;
        AVCaptureWhiteBalanceGains currentGains = device.deviceWhiteBalanceGains;
        currentGains = [self clampGains:currentGains toMinVal:1 andMaxVal:maxWhiteBalaceGain];
        CGFloat currentTemperature = [device temperatureAndTintValuesForDeviceWhiteBalanceGains:currentGains].temperature;
        AVCaptureWhiteBalanceTemperatureAndTintValues tempAndTintValues = {
            .temperature = currentTemperature,
            .tint        = tint,
        };
        
        AVCaptureWhiteBalanceGains deviceGains = [device deviceWhiteBalanceGainsForTemperatureAndTintValues:tempAndTintValues];
        deviceGains = [self clampGains:deviceGains toMinVal:1 andMaxVal:maxWhiteBalaceGain];
        
        [device setWhiteBalanceModeLockedWithDeviceWhiteBalanceGains:deviceGains completionHandler:nil];
        [device unlockForConfiguration];
    }
}

9.屏幕填充方式

  • AVLayerVideoGravityResizeAspect: 保持分辨率比例,如果屏幕分辨率与视频分辨率不一致会留下黑边.
  • AVLayerVideoGravityResizeAspectFill: 保持分辨率比例去填充屏幕,即以较小的边来准填充屏幕,会牺牲掉一些像素,因为超出屏幕.
  • AVLayerVideoGravityResize:以拉伸的方式来填充屏幕,不会牺牲像素,但是画面会被拉伸.
- (void)setVideoGravity:(AVLayerVideoGravity)videoGravity previewLayer:(AVCaptureVideoPreviewLayer *)previewLayer session:(AVCaptureSession *)session {
    [session beginConfiguration];
    [previewLayer setVideoGravity:videoGravity];
    [session commitConfiguration];
}
最后编辑于 ：
©著作权归作者所有,转载或内容合作请联系作者
  • 人面猴
    序言：七十年代末，一起剥皮案震惊了整个滨河市，随后出现的几起案子，更是在滨河造成了极大的恐慌，老刑警刘岩，带你破解...
    沈念sama阅读 203,547评论 6赞 477
  • 死咒
    序言：滨河连续发生了三起死亡事件，死亡现场离奇诡异，居然都是意外死亡，警方通过查阅死者的电脑和手机，发现死者居然都...
    沈念sama阅读 85,399评论 2赞 381
  • 救了他两次的神仙让他今天三更去死
    文/潘晓璐 我一进店门，熙熙楼的掌柜王于贵愁眉苦脸地迎上来，“玉大人，你说我怎么就摊上这事。” “怎么了？”我有些...
    开封第一讲书人阅读 150,428评论 0赞 337
  • 道士缉凶录：失踪的卖姜人
    文/不坏的土叔 我叫张陵，是天一观的道长。 经常有香客问我，道长，这世上最难降的妖魔是什么？ 我笑而不...
    开封第一讲书人阅读 54,599评论 1赞 274
  • 港岛之恋（遗憾婚礼）
    正文 为了忘掉前任，我火速办了婚礼，结果婚礼上，老公的妹妹穿的比我还像新娘。我一直安慰自己，他们只是感情好，可当我...
    茶点故事阅读 63,612评论 5赞 365
  • 恶毒庶女顶嫁案：这布局不是一般人想出来的
    文/花漫 我一把揭开白布。 她就那样静静地躺着，像睡着了一般。 火红的嫁衣衬着肌肤如雪。 梳的纹丝不乱的头发上，一...
    开封第一讲书人阅读 48,577评论 1赞 281
  • 城市分裂传说
    那天，我揣着相机与录音，去河边找鬼。 笑死，一个胖子当着我的面吹牛，可吹牛的内容都是我干的。 我是一名探鬼主播，决...
    沈念sama阅读 37,941评论 3赞 395
  • 双鸳鸯连环套：你想象不到人心有多黑
    文/苍兰香墨 我猛地睁开眼，长吁一口气：“原来是场噩梦啊……” “哼！你这毒妇竟也来了？” 一声冷哼从身侧响起，我...
    开封第一讲书人阅读 36,603评论 0赞 258
  • 万荣杀人案实录
    序言：老挝万荣一对情侣失踪，失踪者是张志新（化名）和其女友刘颖，没想到半个月后，有当地人在树林里发现了一具尸体，经...
    沈念sama阅读 40,852评论 1赞 297
  • 护林员之死
    正文 独居荒郊野岭守林人离奇死亡，尸身上长有42处带血的脓包…… 初始之章·张勋 以下内容为张勋视角 年9月15日...
    茶点故事阅读 35,605评论 2赞 321
  • 白月光启示录
    正文 我和宋清朗相恋三年，在试婚纱的时候发现自己被绿了。 大学时的朋友给我发了我未婚夫和他白月光在一起吃饭的照片。...
    茶点故事阅读 37,693评论 1赞 329
  • 活死人
    序言：一个原本活蹦乱跳的男人离奇死亡，死状恐怖，灵堂内的尸体忽然破棺而出，到底是诈尸还是另有隐情，我是刑警宁泽，带...
    沈念sama阅读 33,375评论 4赞 318
  • 日本核电站爆炸内幕
    正文 年R本政府宣布，位于F岛的核电站，受9级特大地震影响，放射性物质发生泄漏。R本人自食恶果不足惜，却给世界环境...
    茶点故事阅读 38,955评论 3赞 307
  • 男人毒药：我在死后第九天来索命
    文/蒙蒙 一、第九天 我趴在偏房一处隐蔽的房顶上张望。 院中可真热闹，春花似锦、人声如沸。这庄子的主人今日做“春日...
    开封第一讲书人阅读 29,936评论 0赞 19
  • 一桩弑父案，背后竟有这般阴谋
    文/苍兰香墨 我抬头看了看天上的太阳。三九已至，却和暖如春，着一层夹袄步出监牢的瞬间，已是汗流浃背。 一阵脚步声响...
    开封第一讲书人阅读 31,172评论 1赞 259
  • 情欲美人皮
    我被黑心中介骗来泰国打工， 没想到刚下飞机就差点儿被人妖公主榨干…… 1. 我叫王不留，地道东北人。 一个月前我还...
    沈念sama阅读 43,970评论 2赞 349
  • 代替公主和亲
    正文 我出身青楼，却偏偏与公主长得像，于是被迫代替她去往敌国和亲。 传闻我的和亲对象是个残疾皇子，可洞房花烛夜当晚...
    茶点故事阅读 42,414评论 2赞 342