GCD
基础知识
串行与并行
串行队列：需要要等待上一个执行完，再执行下一个的Serial Dispatch Queue
并行队列：不需要上一个执行完，就能执行下一个的Concurrent Dispatch Queue。这两种，均遵循FIFO原则。
同步与异步
串行与并行针对的是队列，而同步与异步，针对的则是线程。最大的区别在于，同步线程要阻塞当前线程，必须要等待同步线程中的任务执行完，返回以后，才能继续执行下一任务；而异步线程则是不用等待，各个线程同时执行。
1.GCD的优势
1）易用: GCD比之thread跟简单易用。由于GCD基于work unit而非像thread那样基于运算，所以GCD可以控制诸如等待任务结束、监视文件描述符、周期执行代码以及工作挂起等任务。基于block的血统导致它能极为简单得在不同代码作用域之间传递上下文。
2）效率: GCD被实现得如此轻量和优雅，使得它在很多地方比之专门创建消耗资源的线程更实用且快速。这关系到易用性：导致GCD易用的原因有一部分在于你可以不用担心太多的效率问题而仅仅使用它就行了。
3）性能: GCD自动根据系统负载来增减线程数量，这就减少了上下文切换以及增加了计算效率。
2.GCD的种类
1）系统队列
main_queue
dispatch_queue_t serialqueue = dispatch_get_main_queue();
dispatch_async(serialqueue, ^{
NSLog(@"main_queue");
});
global_queue
dispatch_queue_t queue = dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, 0);
dispatch_async(queue, ^{
NSLog(@"global_queue");
});
默认优先级的全局并发dispatch queue有三个优先级，分别是：
DISPATCH_QUEUE_PRIORITY_HIGH 2
DISPATCH_QUEUE_PRIORITY_DEFAULT 0
DISPATCH_QUEUE_PRIORITY_LOW (-2)
2)自己创建的队列
serialQueue
dispatch_queue_t mySerialQueue = dispatch_queue_create("com.example.mySerialQueue", DISPATCH_QUEUE_SERIAL);
dispatch_async(mySerialQueue, ^{
NSLog(@"mySerialQueue");
});
dispatch_queue_t mySerialQueue = dispatch_queue_create("com.example.mySerialQueue", NULL);
dispatch_async(mySerialQueue, ^{
NSLog(@"mySerialQueue");
});
concurrentQueue
dispatch_queue_t myConcurrentQueue = dispatch_queue_create("com.example.myConcurrentQueue", DISPATCH_QUEUE_CONCURRENT);
dispatch_async(myConcurrentQueue, ^{
NSLog(@"myConcurrentQueue");
});
在串行队列中，如果要在某项任务执行完后再执行其他任务，只需把该任务放到最后即可，但是在并行队列中怎么实现？可以使用Dispatch Groups 或者 Dispatch Semaphore
1）Dispatch Groups
Dispatch Groups 可以是用在并行队列中等某些任务完成后再执行其他任务
dispatch_queue_t concurrentQueue = dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, 0);
dispatch_group_t group = dispatch_group_create();
dispatch_group_async(group, concurrentQueue, ^{
[NSThread sleepForTimeInterval:6];
NSLog(@"[NSThread sleepForTimeInterval:6];");
});
dispatch_group_async(group, concurrentQueue, ^{
[NSThread sleepForTimeInterval:3];
NSLog(@"[NSThread sleepForTimeInterval:3];");
});
dispatch_group_async(group, concurrentQueue, ^{
[NSThread sleepForTimeInterval:1];
NSLog(@"[NSThread sleepForTimeInterval:1];");
});
dispatch_group_notify(group, dispatch_get_main_queue(), ^{
NSLog(@"finish");
});
2）Dispatch Semaphore
信号量一般用来做同步任务和有限资源访问控制
dispatch_semaphore_t semaphore = dispatch_semaphore_create(0); //创建信号量
dispatch_semaphore_signal(semaphore); //发出信号量 让信号量加一
dispatch_semaphore_wait(semaphore, DISPATCH_TIME_FOREVER); //等待 信号量小于一则一直等待
dispatch_semaphore_t semaphore = dispatch_semaphore_create(0);
dispatch_after(dispatch_time(DISPATCH_TIME_NOW, (int64_t)(3.0 * NSEC_PER_SEC)), dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, 0), ^{
dispatch_semaphore_signal(semaphore);
});
dispatch_semaphore_wait(semaphore, DISPATCH_TIME_FOREVER);
Dispatch_barrier
dispatch_queue_t myQueue = dispatch_queue_create("com.example.myQueue", DISPATCH_QUEUE_CONCURRENT);
dispatch_async(myQueue, ^{
[NSThread sleepForTimeInterval:3];
NSLog(@"dispatch_async1");
});
dispatch_async(myQueue, ^{
[NSThread sleepForTimeInterval:1];
NSLog(@"dispatch_async2");
});
dispatch_barrier_async(myQueue, ^{
NSLog(@"dispatch_barrier_async");
[NSThread sleepForTimeInterval:0.5];
});
dispatch_async(myQueue, ^{
[NSThread sleepForTimeInterval:1];
NSLog(@"dispatch_async3");
});
结果是 在并行队列中 dispatch_barrier_async 前面的正常执行，而他会阻塞后面的代码执行，
直到前面的任务完成后，开始执行 dispatch_barrier_async 里面的代码 完成后才开始进行执行下去
2016-04-07 17:18:02.475 GCD[2030:586717] dispatch_async2
2016-04-07 17:18:04.473 GCD[2030:586715] dispatch_async1
2016-04-07 17:18:04.474 GCD[2030:586717] dispatch_barrier_async
2016-04-07 17:18:05.981 GCD[2030:586715] dispatch_async3
常见问题#
1）线程死锁
dispatch_queue_t queue = dispatch_queue_create("com.example.serialQueue", DISPATCH_QUEUE_SERIAL);
dispatch_async(queue, ^{
NSLog(@"sync %@",[NSThread currentThread]);
dispatch_sync(queue, ^{
NSLog(@"sync1 %@",[NSThread currentThread]);
});
dispatch_async(queue, ^{
NSLog(@"async2 %@",[NSThread currentThread]);
});
});
dispatch_sync(dispatch_get_main_queue(), ^{
NSLog(@"死锁");
});
这两个阻塞的原因是 在 dispatch_sync 中，当前的队列和提交的队列相同，从而造成死锁。
官方文档：
Submits a block to a dispatch queue for synchronous execution. Unlike dispatch_async, this function does not return until the block has finished. Calling this function and targeting the current queue results in deadlock.
