很久没有写Android控件了，正好最近项目有个自定义控件的需求，整理了下做个总结，主要是实现类似于抖音翻页的效果，但是有有点不同，需要在底部漏出后面的view，这样说可能不好理解，看下Demo，按页滑动，后面的View有放大缩放的动画，滑动速度过小时会有回到原位的效果，下滑也是按页滑动的效果。
有的小伙伴可能说这个用 SnapHelper就可以了，没错，翻页是要结合这个，但是也不是纯粹靠这个，因为底部需要漏出来后面的view，所以LayoutManager就不能简单的使用LinearLayoutManager,需要去自定义LayoutManager,然后再自定义SnapHelper。
如果把自定义LayoutManager和SnapHelper放在一篇里面会太长，所以我们今天主要分析SnapHelper。
本文分析的源码是基于recyclerview-v7-26.1.0
1.Scroll和Fling
这方面参考我的上篇分享：RecyclerView之Scroll和Fling
总结一下调用栈就是：
SnapHelper
onFling ---> snapFromFling
上面得到最终位置targetPosition,把位置给RecyclerView.SmoothScroller, 然后就开始滑动了：
RecyclerView.SmoothScroller
start --> onAnimation
在滑动过程中如果targetPosition对应的targetView已经layout出来了，就会回调SnapHelper，然后计算得到到当前位置到targetView的距离dx,dy
SnapHelper
onTargetFound ---> calculateDistanceToFinalSnap
然后把距离dx,dy更新给RecyclerView.Action:
RecyclerView.Action
update --> runIfNecessary --> recyclerView.mViewFlinger.smoothScrollBy
最后调用RecyclerView.ViewFlinger, 然后又回到onAnimation
class ViewFlinger implements Runnable
public void smoothScrollBy(int dx, int dy, int duration, Interpolator interpolator) {
if (mInterpolator != interpolator) {
mInterpolator = interpolator;
mScroller = new OverScroller(getContext(), interpolator);
}
setScrollState(SCROLL_STATE_SETTLING);
mLastFlingX = mLastFlingY = 0;
mScroller.startScroll(0, 0, dx, dy, duration);
postOnAnimation();
}
2.SnapHelper源码分析
上面其实已经接触到部分的SnapHelper源码, SnapHelper其实是一个抽象类，有三个抽象方法：
/**
* Override to provide a particular adapter target position for snapping.
*
* @param layoutManager the {@link RecyclerView.LayoutManager} associated with the attached
* {@link RecyclerView}
* @param velocityX fling velocity on the horizontal axis
* @param velocityY fling velocity on the vertical axis
*
* @return the target adapter position to you want to snap or {@link RecyclerView#NO_POSITION}
* if no snapping should happen
*/
public abstract int findTargetSnapPosition(LayoutManager layoutManager, int velocityX,
int velocityY);
/**
* Override this method to snap to a particular point within the target view or the container
* view on any axis.
* <p>
* This method is called when the {@link SnapHelper} has intercepted a fling and it needs
* to know the exact distance required to scroll by in order to snap to the target view.
*
* @param layoutManager the {@link RecyclerView.LayoutManager} associated with the attached
* {@link RecyclerView}
* @param targetView the target view that is chosen as the view to snap
*
* @return the output coordinates the put the result into. out[0] is the distance
* on horizontal axis and out[1] is the distance on vertical axis.
*/
@SuppressWarnings("WeakerAccess")
@Nullable
public abstract int[] calculateDistanceToFinalSnap(@NonNull LayoutManager layoutManager,
@NonNull View targetView);
/**
* Override this method to provide a particular target view for snapping.
* <p>
* This method is called when the {@link SnapHelper} is ready to start snapping and requires
* a target view to snap to. It will be explicitly called when the scroll state becomes idle
* after a scroll. It will also be called when the {@link SnapHelper} is preparing to snap
* after a fling and requires a reference view from the current set of child views.
* <p>
* If this method returns {@code null}, SnapHelper will not snap to any view.
*
* @param layoutManager the {@link RecyclerView.LayoutManager} associated with the attached
* {@link RecyclerView}
*
* @return the target view to which to snap on fling or end of scroll
*/
@SuppressWarnings("WeakerAccess")
@Nullable
public abstract View findSnapView(LayoutManager layoutManager);
上面三个方法就是我们重写SnapHelper需要实现的，很重要，简单介绍下它们的作用和调用时机：
findTargetSnapPosition用来找到最终的目标位置，在fling操作刚触发的时候会根据速度计算一个最终目标位置，然后开始fling操作
calculateDistanceToFinalSnap这个用来计算滑动到最终位置还需要滑动的距离，在一开始attachToRecyclerView或者targetView layout的时候会调用
findSnapView用来找到上面的targetView，就是需要对其的view，在calculateDistanceToFinalSnap调用之前会调用该方法。
我们看下SnapHelper怎么用的，其实就一行代码：
this.snapHelper.attachToRecyclerView(view);
SnapHelper正是通过该方法附着到RecyclerView上，从而实现辅助RecyclerView滚动对齐操作,那我们就从上面的attachToRecyclerView开始入手：
public void attachToRecyclerView(@Nullable RecyclerView recyclerView)
throws IllegalStateException {
if (mRecyclerView == recyclerView) {
return; // nothing to do
}
if (mRecyclerView != null) {
destroyCallbacks();
}
mRecyclerView = recyclerView;
if (mRecyclerView != null) {
setupCallbacks();
mGravityScroller = new Scroller(mRecyclerView.getContext(),
new DecelerateInterpolator());
snapToTargetExistingView();
}
}
在attachToRecyclerView()方法中会清掉SnapHelper之前保存的RecyclerView对象的回调(如果有的话)，对新设置进来的RecyclerView对象设置回调,然后初始化一个Scroller对象,最后调用snapToTargetExistingView()方法对SnapView进行对齐调整。
snapToTargetExistingView()
该方法的作用是对SnapView进行滚动调整，以使得SnapView达到对齐效果。
看下源码：
void snapToTargetExistingView() {
if (mRecyclerView == null) {
return;
}
LayoutManager layoutManager = mRecyclerView.getLayoutManager();
if (layoutManager == null) {
return;
}
View snapView = findSnapView(layoutManager);
if (snapView == null) {
return;
}
int[] snapDistance = calculateDistanceToFinalSnap(layoutManager, snapView);
if (snapDistance[0] != 0 || snapDistance[1] != 0) {
mRecyclerView.smoothScrollBy(snapDistance[0], snapDistance[1]);
}
}
snapToTargetExistingView()方法就是先找到SnapView，然后计算SnapView当前坐标到目的坐标之间的距离，然后调用RecyclerView.smoothScrollBy()方法实现对RecyclerView内容的平滑滚动，从而将SnapView移到目标位置，达到对齐效果。
其实这个时候RecyclerView还没进行layout，一般findSnapView会返回null，不需要对齐。
回调
SnapHelper要有对齐功能，肯定需要知道RecyclerView的滚动scroll和fling过程的，这个就是通过回调接口实现。再看下attachToRecyclerView的源码：
public void attachToRecyclerView(@Nullable RecyclerView recyclerView)
throws IllegalStateException {
if (mRecyclerView == recyclerView) {
return; // nothing to do
}
if (mRecyclerView != null) {
destroyCallbacks();
}
mRecyclerView = recyclerView;
if (mRecyclerView != null) {
setupCallbacks();
mGravityScroller = new Scroller(mRecyclerView.getContext(),
new DecelerateInterpolator());
snapToTargetExistingView();
}
}
一开始会先清空之前的回调接口然后再注册接口，先看下destroyCallbacks:
/**
* Called when the instance of a {@link RecyclerView} is detached.
*/
private void destroyCallbacks() {
mRecyclerView.removeOnScrollListener(mScrollListener);
mRecyclerView.setOnFlingListener(null);
}
可以看出SnapHelper对RecyclerView设置了两个回调，一个是OnScrollListener对象mScrollListener，另外一个就是OnFlingListener对象。
再看下setupCallbacks:
/**
* Called when an instance of a {@link RecyclerView} is attached.
*/
private void setupCallbacks() throws IllegalStateException {
if (mRecyclerView.getOnFlingListener() != null) {
throw new IllegalStateException("An instance of OnFlingListener already set.");
}
mRecyclerView.addOnScrollListener(mScrollListener);
mRecyclerView.setOnFlingListener(this);
}
SnapHelper实现了RecyclerView.OnFlingListener接口，所以OnFlingListener就是SnapHelper自身。
先来看下RecyclerView.OnScrollListener对象mScrollListener
RecyclerView.OnScrollListener
先看下mScrollListener是怎么实现的：
private final RecyclerView.OnScrollListener mScrollListener =
new RecyclerView.OnScrollListener() {
boolean mScrolled = false;
@Override
public void onScrollStateChanged(RecyclerView recyclerView, int newState) {
super.onScrollStateChanged(recyclerView, newState);
if (newState == RecyclerView.SCROLL_STATE_IDLE && mScrolled) {
mScrolled = false;
snapToTargetExistingView();
}
}
@Override
public void onScrolled(RecyclerView recyclerView, int dx, int dy) {
if (dx != 0 || dy != 0) {
mScrolled = true;
}
}
};
mScrolled = true表示之前滚动过，RecyclerView.SCROLL_STATE_IDLE表示滚动停止，这个不清楚的可以看考之前的博客RecyclerView之Scroll和Fling。这个监听器的实现其实很简单，就是在滚动停止的时候调用snapToTargetExistingView对目标View进行滚动调整对齐。
RecyclerView.OnFlingListener
RecyclerView.OnFlingListener接口只有一个方法，这个就是在Fling操作触发的时候会回调，返回true就是已处理，返回false就会交给系统处理。
/**
* This class defines the behavior of fling if the developer wishes to handle it.
* <p>
* Subclasses of {@link OnFlingListener} can be used to implement custom fling behavior.
*
* @see #setOnFlingListener(OnFlingListener)
*/
public abstract static class OnFlingListener {
/**
* Override this to handle a fling given the velocities in both x and y directions.
* Note that this method will only be called if the associated {@link LayoutManager}
* supports scrolling and the fling is not handled by nested scrolls first.
*
* @param velocityX the fling velocity on the X axis
* @param velocityY the fling velocity on the Y axis
*
* @return true if the fling was handled, false otherwise.
*/
public abstract boolean onFling(int velocityX, int velocityY);
}
看下SnapHelper怎么实现onFling()方法:
@Override
public boolean onFling(int velocityX, int velocityY) {
LayoutManager layoutManager = mRecyclerView.getLayoutManager();
if (layoutManager == null) {
return false;
}
RecyclerView.Adapter adapter = mRecyclerView.getAdapter();
if (adapter == null) {
return false;
}
int minFlingVelocity = mRecyclerView.getMinFlingVelocity();
return (Math.abs(velocityY) > minFlingVelocity || Math.abs(velocityX) > minFlingVelocity)
&& snapFromFling(layoutManager, velocityX, velocityY);
}
首先会获取mRecyclerView.getMinFlingVelocity()需要进行fling操作的最小速率，只有超过该速率，Item才能在手指离开的时候进行Fling操作。
关键就是调用snapFromFling方法实现平滑滚动。
snapFromFling
看下怎么实现的：
private boolean snapFromFling(@NonNull LayoutManager layoutManager, int velocityX,
int velocityY) {
if (!(layoutManager instanceof ScrollVectorProvider)) {
return false;
}
SmoothScroller smoothScroller = createScroller(layoutManager);
if (smoothScroller == null) {
return false;
}
int targetPosition = findTargetSnapPosition(layoutManager, velocityX, velocityY);
if (targetPosition == RecyclerView.NO_POSITION) {
return false;
}
smoothScroller.setTargetPosition(targetPosition);
layoutManager.startSmoothScroll(smoothScroller);
return true;
}
- 首先判断是不是实现了
ScrollVectorProvider接口，系统提供的Layoutmanager默认都实现了该接口- 创建SmoothScroller对象,默认是
LinearSmoothScroller对象，会用LinearInterpolator进行平滑滚动，在目标位置成为Recyclerview的子View时会用DecelerateInterpolator进行减速停止。- 通过
findTargetSnapPosition()方法，以layoutManager和速率作为参数，找到targetSnapPosition,这个方法就是自定义SnapHelper需要实现的。- 把targetSnapPosition设置给平滑滚动器，然后开始进行滚动操作。
很明显重点就是要看下平滑滚动器了。
LinearSmoothScroller
看下系统怎么实现：
@Nullable
protected LinearSmoothScroller createSnapScroller(LayoutManager layoutManager) {
if (!(layoutManager instanceof ScrollVectorProvider)) {
return null;
}
return new LinearSmoothScroller(mRecyclerView.getContext()) {
@Override
protected void onTargetFound(View targetView, RecyclerView.State state, Action action) {
int[] snapDistances = calculateDistanceToFinalSnap(mRecyclerView.getLayoutManager(),
targetView);
final int dx = snapDistances[0];
final int dy = snapDistances[1];
final int time = calculateTimeForDeceleration(Math.max(Math.abs(dx), Math.abs(dy)));
if (time > 0) {
action.update(dx, dy, time, mDecelerateInterpolator);
}
}
@Override
protected float calculateSpeedPerPixel(DisplayMetrics displayMetrics) {
return MILLISECONDS_PER_INCH / displayMetrics.densityDpi;
}
};
}
在通过findTargetSnapPosition()方法找到的targetSnapPosition成为Recyclerview的子View时(根据Recyclerview的缓存机制，这个时候可能该View在屏幕上还看不到),会回调onTargetFound，看下系统定义：
/**
* Called when the target position is laid out. This is the last callback SmoothScroller
* will receive and it should update the provided {@link Action} to define the scroll
* details towards the target view.
* @param targetView The view element which render the target position.
* @param state Transient state of RecyclerView
* @param action Action instance that you should update to define final scroll action
* towards the targetView
*/
protected abstract void onTargetFound(View targetView, State state, Action action);
传入的第一个参数targetView就是我们希望滚动到的位置对应的View，最后一个参数就是我们可以用来通知滚动器要减速滚动的距离。
其实就是我们要在这个方法里面告诉滚动器在目标子View layout出来后还需要滚动多少距离， 然后通过Action通知滚动器。
第二个方法是计算滚动速率，返回值会影响onTargetFound中的calculateTimeForDeceleration方法，看下源码：
private final float MILLISECONDS_PER_PX;
public LinearSmoothScroller(Context context) {
MILLISECONDS_PER_PX = calculateSpeedPerPixel(context.getResources().getDisplayMetrics());
}
/**
* Calculates the time it should take to scroll the given distance (in pixels)
*
* @param dx Distance in pixels that we want to scroll
* @return Time in milliseconds
* @see #calculateSpeedPerPixel(android.util.DisplayMetrics)
*/
protected int calculateTimeForScrolling(int dx) {
// In a case where dx is very small, rounding may return 0 although dx > 0.
// To avoid that issue, ceil the result so that if dx > 0, we'll always return positive
// time.
return (int) Math.ceil(Math.abs(dx) * MILLISECONDS_PER_PX);
}
/**
* <p>Calculates the time for deceleration so that transition from LinearInterpolator to
* DecelerateInterpolator looks smooth.</p>
*
* @param dx Distance to scroll
* @return Time for DecelerateInterpolator to smoothly traverse the distance when transitioning
* from LinearInterpolation
*/
protected int calculateTimeForDeceleration(int dx) {
// we want to cover same area with the linear interpolator for the first 10% of the
// interpolation. After that, deceleration will take control.
// area under curve (1-(1-x)^2) can be calculated as (1 - x/3) * x * x
// which gives 0.100028 when x = .3356
// this is why we divide linear scrolling time with .3356
return (int) Math.ceil(calculateTimeForScrolling(dx) / .3356);
}
可以看到，第二个方法返回值越大，需要滚动的时间越长，也就是滚动越慢。
3.总结
到这里，SnapHelper的源码就分析完了，整理下思路，SnapHelper辅助RecyclerView实现滚动对齐就是通过给RecyclerView设置OnScrollerListener和OnFlingListener这两个监听器实现的。
整个过程如下：
- 在
onFling操作触发的时候首先通过findTargetSnapPosition找到最终需要滚动到的位置，然后启动平滑滚动器滚动到指定位置，- 在指定位置需要渲染的View -targetView layout出来后，系统会回调
onTargetFound,然后调用calculateDistanceToFinalSnap方法计算targetView需要减速滚动的距离，然后通过Action更新给滚动器。- 在滚动停止的时候，也就是state变成
SCROLL_STATE_IDLE时会调用snapToTargetExistingView，通过findSnapView找到SnapView，然后通过calculateDistanceToFinalSnap计算得到滚动的距离，做最后的对齐调整。
前面分享的Demo就留到下一篇博客再说了，其实只要理解了SnapHelper的源码，自定义就很简单了。
对Demo感兴趣的欢迎关注下一篇博客了。
完。
