同步有多种方式，基站和基站之间的同步可以通过GPS，空口同步，1588获取同步信号等。UE和基站之间的同步一般都是空口同步来实现的。
PSS在子帧1和子帧6的第三个符号上，SSS在子帧0和子帧5的最后一个符号上。
PSS
PSS(Primary Synchronization Channel)是主同步信号，计算生成公式如下
在TDD和FDD中还处于不同的子帧时隙上：
中间的72个子载波，DC不占用，FDD中占用slot 0 (Subframe 0) and slot 10 (Subframe 5)
中间的72个子载波，DC不占用，TDD中占用slot 1 (Subframe 1) and slot 11 (Subframe 6)，实际可以看到他是占用的特殊子帧的第3个OFDM符号（160 + 2048 + 144 + 2048 —PSS—）
在一个子帧的slot中，常规CP下，每个OFDM符号的位置的点数
由62 Zadoff Chu SequenceValues组成，在计算同步相关的过程中，需要将此62个频域样点映射到不同位置，并转换到时域占用特殊子帧的第三个OFDM符号
按照先前的公式计算，则有：
由Physical Cell ID（PCI）决定是哪一个序列，NID = PCI Mod 3，比如PCI= 61，NID = 1
下面是计算PSS symbol的
最终计算同步相关峰值计算如下：
最终频谱分析的计算的结果如图，中心频点是2360，PUCCH占10个RB，PUSCH资源全部占完：
起始PRB在20，固定24个RB的频谱分析，下面是带着0子载波的
下图是起始PRB是50，固定24个PRB的
下图是起始PRB是30，固定39个PRB的
SSS
SSS(Secondary Synchronization Channel)是辅同步信号
Mapped to 72 active sub carriers(6 resource blocks), centered around the DC subcarrier in slot 0 (Subframe 0) and slot 10 (Subframe 5) in FDD，子帧0上的SSS序列和子帧5的SSS序列是不同的
Mapped to 72 active sub carriers(6 resource blocks), centered around the DC subcarrier in slot 1 (Subframe 0) and slot 11 (Subframe 5) in TDD，子帧0上的SSS序列和子帧5的SSS序列是不同的
由62 Scrambling Sequence (基于m-sequence)组成
用来做Downlink Frame Synchronization
关键的一个因子由Physical Cell ID决定
Matlab代码生成SSS Generation
clear all;
NID1 = 0;
NID2 = 0;
q_prime = floor(NID1/30);
q = floor(((NID1+q_prime*(q_prime+1)/2))/30);
m_prime = NID1 + q *(q+1)/2;
m0 = mod(m_prime, 31);
m1 = mod(m0 + floor(m_prime/31)+1,31);
%%%%%%%%%%%%%%%%% generate d_even() sequence %%%%%%%%%%%%%%%%
% Generate the sequence x_s() : x() for calculating s_tilda()
x_s = zeros(1,31);
x_s(1:5) = [0 0 0 0 1];
for i = 0:25
x_s((i+5)+1) = mod(x_s(i+2+1)+x_s(i+1),2);
end;
% Generate the sequence x_c() : x() for calculating c_tilda()
x_c = zeros(1,31);
x_c(1:5) = [0 0 0 0 1];
for i = 0:25
x_c((i+5)+1) = mod(x_c(i+3+1)+x_c(i+1),2);
end;
% Generate the sequence s_tilda()
s_tilda = zeros(1,31);
for i = 0:30
s_tilda(i+1) = 1 - 2*x_s(i+1);
end;
% Generate the sequence c_tilda()
c_tilda = zeros(1,31);
for i = 0:30
c_tilda(i+1) = 1 - 2*x_c(i+1);
end;
% Generate s0_m0_even()
s0_m0_even = zeros(1,31);
for n = 0:30
s0_m0_even(n+1) = s_tilda(mod(n+m0,31)+1);
end;
% Generate c0_even()
c0_even = zeros(1,31);
for n = 0:30
c0_even(n+1) = c_tilda(mod(n+NID2,31)+1);
end;
% Calculate d_even_sub0
d_even_sub0 = s0_m0_even .* c0_even;
%%%%%%%%%%%%%%%%% generate d_odd() sequence %%%%%%%%%%%%%%%%
% Generate the sequence x_s() : x() for calculating s_tilda()
x_z = zeros(1,31);
x_z(1:5) = [0 0 0 0 1];
for i = 0:25
x_z((i+5)+1) = mod(x_z(i+4+1) + x_z(i+2+1) + x_z(i+1+1)+ x_z(i+1),2);
end;
% Generate the sequence z_tilda()
z_tilda = zeros(1,31);
for i = 0:30
z_tilda(i+1) = 1 - 2*x_z(i+1);
end;
% Generate s1_m1_odd()
s1_m1_odd = zeros(1,31);
for n = 0:30
s1_m1_odd(n+1) = s_tilda(mod(n+m1,31)+1);
end;
% Generate c1_odd()
c1_odd = zeros(1,31);
for n = 0:30
c1_odd(n+1) = c_tilda(mod(n+NID2+3,31)+1);
end;
% Generate z1_m0_odd()
z1_m0_odd = zeros(1,31);
for n = 0:30
z1_m0_odd(n+1) = z_tilda(mod(n+mod(m0,8),31)+1);
end;
% Calculate d_odd_sub0
d_odd_sub0 = s1_m1_odd .* c1_odd .* z1_m0_odd;
% Calculate d_sub0
d_sub0 = zeros(1,62);
d_sub0(1:2:end-1) = d_even_sub0;
d_sub0(2:2:end) = d_odd_sub0;
subplot(1,5,1);
plot(real(d_sub0),imag(d_sub0),'ro','MarkerFaceColor',[1 0 1]);axis([-1.5 1.5 -1.5 1.5]);
subplot(1,5,[2 5]);
plot(real(d_sub0),'ro-');xlim([0 length(d_sub0)]);
