现象：近来，发现Asterisk SIP服务经常占用CPU 100%以上，而且都在服务启动1个小时后出现，但重启服务后就恢复正常
初步分析：通过tshark对网络发包测试，并未发现有明显变化，因此不是请求量变大引发的CPU紧张（从重启服务恢复正常也可以证实），因此可以确定是服务内部的问题，得益于 《Why does Asterisk consume 100% CPU?》 这篇文章，我对asterisk服务进行了深度剖析，过程如下
步骤1. 获取哪个线程（Light Weight Process）占用CPU最高
ps -LlFm -p pidof asterisk
F S UID PID PPID LWP C NLWP PRI NI ADDR SZ WCHAN RSS PSR STIME TTY TIME CMD
4 - root 13090 13088 - 25 47 - - - 522547 - 573636 - 08:43 pts/18 00:07:28 /usr/sbin/asterisk -f -vvvg -c
4 S root - - 13090 0 - 80 0 - - poll_s - 1 08:43 - 00:00:00 -
1 S root - - 13091 0 - 80 0 - - futex_ - 1 08:43 - 00:00:00 -
1 S root - - 13092 0 - 80 0 - - futex_ - 0 08:43 - 00:00:17 -
1 R root - - 13093 3 - 80 0 - - - - 0 08:43 - 00:01:01 -
1 S root - - 13094 1 - 80 0 - - futex_ - 1 08:43 - 00:00:19 -
1 S root - - 13096 0 - 80 0 - - poll_s - 0 08:43 - 00:00:00 -
1 S root - - 13098 0 - 80 0 - - futex_ - 0 08:43 - 00:00:02 -
1 S root - - 13100 0 - 80 0 - - futex_ - 1 08:43 - 00:00:00 -
1 S root - - 13101 0 - 80 0 - - futex_ - 0 08:43 - 00:00:00 -
1 S root - - 13102 0 - 80 0 - - futex_ - 1 08:43 - 00:00:00 -
1 S root - - 13103 0 - 80 0 - - futex_ - 1 08:43 - 00:00:00 -
1 S root - - 13104 2 - 80 0 - - futex_ - 1 08:43 - 00:00:48 -
1 S root - - 13105 0 - 80 0 - - futex_ - 1 08:43 - 00:00:00 -
1 S root - - 13106 0 - 80 0 - - futex_ - 1 08:43 - 00:00:00 -
1 S root - - 13107 0 - 80 0 - - futex_ - 1 08:43 - 00:00:00 -
1 S root - - 13108 0 - 80 0 - - futex_ - 1 08:43 - 00:00:00 -
1 S root - - 13109 0 - 80 0 - - futex_ - 1 08:43 - 00:00:00 -
1 S root - - 13110 0 - 80 0 - - futex_ - 1 08:43 - 00:00:00 -
1 S root - - 13111 0 - 80 0 - - futex_ - 0 08:43 - 00:00:00 -
1 S root - - 13112 0 - 80 0 - - futex_ - 1 08:43 - 00:00:00 -
1 S root - - 13113 0 - 80 0 - - futex_ - 1 08:43 - 00:00:00 -
1 S root - - 13114 0 - 80 0 - - futex_ - 1 08:43 - 00:00:00 -
1 S root - - 13115 0 - 80 0 - - inet_c - 1 08:43 - 00:00:00 -
1 S root - - 13116 0 - 80 0 - - futex_ - 1 08:43 - 00:00:00 -
1 S root - - 13117 0 - 80 0 - - poll_s - 0 08:43 - 00:00:00 -
1 S root - - 13118 0 - 80 0 - - futex_ - 0 08:43 - 00:00:00 -
1 S root - - 13119 0 - 80 0 - - poll_s - 0 08:43 - 00:00:00 -
1 R root - - 13120 16 - 80 0 - - - - 0 08:43 - 00:04:52 -
1 S root - - 13121 0 - 80 0 - - futex_ - 1 08:43 - 00:00:00 -
1 S root - - 13122 0 - 80 0 - - futex_ - 0 08:43 - 00:00:00 -
1 S root - - 13123 0 - 80 0 - - poll_s - 1 08:43 - 00:00:00 -
1 S root - - 13124 0 - 80 0 - - hrtime - 0 08:43 - 00:00:00 -
1 S root - - 13125 0 - 80 0 - - futex_ - 0 08:43 - 00:00:00 -
1 S root - - 13126 0 - 80 0 - - poll_s - 0 08:43 - 00:00:00 -
1 S root - - 13127 0 - 80 0 - - futex_ - 0 08:43 - 00:00:00 -
1 S root - - 13128 0 - 80 0 - - poll_s - 1 08:43 - 00:00:00 -
1 S root - - 13129 0 - 80 0 - - hrtime - 1 08:43 - 00:00:00 -
1 S root - - 13130 0 - 80 0 - - hrtime - 0 08:43 - 00:00:00 -
1 S root - - 13131 0 - 80 0 - - poll_s - 0 08:43 - 00:00:00 -
其中C列表示线程占用CPU的百分比（这个值是自服务启动到目前的平均值，而top命令是实时，因此与top会不一致），从以上我们可以确定是13120线程占用最高，接下来我们要分析13120到底执行了什么
步骤2. 获取具体线程执行堆栈信息
pstack pidof asterisk
Thread 21 (Thread 0x7fecd94ea700 (LWP 13120)):
#0 0x00000000005aee3f in tps_cmp_cb ()
#1 0x00000000004580a5 in internal_ao2_traverse ()
#2 0x0000000000458b51 in __ao2_find ()
#3 0x00000000005aef0d in ast_taskprocessor_create_with_listener ()
#4 0x00000000005b4f1e in ast_threadpool_serializer ()
#5 0x000000000059acc1 in internal_stasis_subscribe.clone.1 ()
#6 0x00000000005a6168 in stasis_message_router_create_internal ()
#7 0x00000000004ef227 in endpoint_internal_create ()
#8 0x00007fecf0ec76c6 in build_peer () from /usr/lib/asterisk/modules/chan_sip.so
#9 0x00007fecf0ed5a48 in realtime_peer () from /usr/lib/asterisk/modules/chan_sip.so
#10 0x00007fecf0ed6646 in sip_find_peer_full () from /usr/lib/asterisk/modules/chan_sip.so
#11 0x00007fecf0ed66b7 in sip_find_peer () from /usr/lib/asterisk/modules/chan_sip.so
#12 0x00007fecf0f00aa7 in register_verify () from /usr/lib/asterisk/modules/chan_sip.so
#13 0x00007fecf0f02cb5 in handle_request_register () from /usr/lib/asterisk/modules/chan_sip.so
#14 0x00007fecf0f0d166 in handle_incoming () from /usr/lib/asterisk/modules/chan_sip.so
#15 0x00007fecf0f0ed84 in handle_request_do () from /usr/lib/asterisk/modules/chan_sip.so
#16 0x00007fecf0f10786 in sipsock_read () from /usr/lib/asterisk/modules/chan_sip.so
#17 0x0000000000514b52 in ast_io_wait ()
#18 0x00007fecf0ed4c6b in do_monitor () from /usr/lib/asterisk/modules/chan_sip.so
从以上我们可以发现与创建taskprocessors有关，于是我们看下了taskprocessors数量
asterisk -rx 'core show taskprocessors'
5d07f1f8-56be-4456-ac64-08dd619b09a9 2 0 1
88498730-b675-433d-b71c-eaa51fde68b6 2 0 1
eaabf337-81d5-4411-a0dc-a05f20071c7c 2 0 1
9dc17b55-f7cb-4ff4-bbcd-44033893eb4f 2 0 1
afa4cfff-4cb9-451b-a5d1-7ace2e4a9040 2 0 0
67729e31-8e78-423b-b5d5-dd746190f374 2 0 0
b9b5e393-f016-4d09-b8fe-03d7633ef174 2 0 0
+---------------------+-----------------+------------+-------------+
55585 taskprocessors
通过以上推测，应该是大量的taskprocessors占用的CPU资源，而且taskprocessors会不停增加
步骤3：结合代码，确认原因
struct ast_taskprocessor *ast_taskprocessor_create_with_listener(const char *name, struct ast_taskprocessor_listener *listener)
{
struct ast_taskprocessor *p = ao2_find(tps_singletons, name, OBJ_KEY);
if (p) {
ast_taskprocessor_unreference(p);
return NULL;
}
return __allocate_taskprocessor(name, listener);
}
ao2_find是根据name从任务队列中查找，一旦这个队列非常大，那CPU需要不停比较，从而会占用大量CPU资源，至此，问题基本确定了；接下来就要进入苦活阶段
步骤4：解决代码BUG
通过分析代码发现如下关系： peer->endpoint->route->subscription->mailbox
mailbox就是"struct ast_taskprocessor"即任务对象，因此可以推断应该是这个依赖链中有对象内存泄露了导致mailbox没有从任务队列中移除，通过一级一级分析，发现是peer内存泄露了，看如下代码
} else if (!strcasecmp(curi, "*") || !expire) { /* Unregister this peer */
/* This means remove all registrations and return OK */
struct sip_peer* peer_db = sip_find_peer_by_db(peer->peername, NULL, TRUE, FINDPEERS, FALSE, 0);
//ast_log(LOG_WARNING, "unregister found name%s\n",peer->peername);
if(peer_db!=NULL && peer->uuid!=NULL && peer_db->uuid!=NULL)
{
//ast_log(LOG_WARNING, "db_uuid%s,peer_uuid%s\n", peer_db->uuid,peer->uuid);
if(strcmp(peer->uuid,peer_db->uuid) == 0)
{
AST_SCHED_DEL_UNREF(sched, peer->expire,
sip_unref_peer(peer, "remove register expire ref"));
ast_verb(3, "Unregistered SIP '%s'\n", peer->name);
expire_register(sip_ref_peer(peer,"add ref for explicit expire_register"));
return PARSE_REGISTER_UPDATE;
}
else
{
ast_log(LOG_WARNING, "Invalid unregister db_uuid%s,but peer_uuid%s\n", peer_db->uuid,peer->uuid);
}
}
peer_db是sip_find_peer_by_db得到的，而sip_find_peer_by_db是有'加引用'的，因此在没用peer_db时需要执行'去引用'，因此此处需要加sip_unref_peer(peer_db, "remove")
当然代码中还有其他地方也是类似，这里不一一列出，改完所有泄露，重新编译运行发现taskprocessors不会不断增加，维持在30个以内，通过几个小时的运行，CPU没有增高，此问题得到的最终解决。
总结
【授之以鱼，不如授之以渔】以上只是一种CPU过高的原因，各位很可能遇到的问题不一样，但都可以借鉴上面步骤对问题进行排查。
