起因

2018.1.16

混hass群时，看其他人讨论的火热，一时冲动买了个软路由小马v1

货到后

2018.1.19

本想搞个exsi，发现默认买的版本是2G内存版本，exsi6要求4G起步，GG。转而直接装lede x86，koolshare论坛版，各种装不起来，换了2.6版本的img终于装成功了。不容易啊！分网口为wan，lan后，搞起。感觉还可以，性能杠杠的内存使用了9.34%(200MB差不多)，netdata监控如下，内存完全过剩。

RAM

感觉还得设置下qos,不知道管用不，默默感受下

QOS

最后感谢koolshare论坛的大大们，开发了这么好的lede x86

homeassistant

2018年1月21日 15:54:04

对我就是要把homeassistant直接装到lede x86里。

1. 安装可爱的debian

由于lede默认的仓库里的轮子不足，不足以满足安装homeassistant，所以只能曲线救国了，用debootstrap装debian,如下图，安装软件koolshare仓库里的unifi Controller

安装unifi Controller

选择单独安装debian

2. 安装homeassistant到debian

winscp登陆到路由器，putty登陆到路由器，然后在putty里

切换到debian子系统

chroot /mnt/sda3/debian /bin/bash  
#没有返回就成功

#更新下软件
 apt update -y && apt upgrade -y  

#安装python3 python3-venv python虚拟空间  python3-pip python包管理器
apt install python3 python3-venv python3-pip

#转到/srv目录，建立homeassistant文件夹
cd /srv
mkdir homeassistant

#更改此文件夹的所有者和所属组
sudo chown homeassistant:homeassistant homeassistant

#更换用户
su -s /bin/bash homeassistant

#切换目录，创建并进入虚拟环境
cd /srv/homeassistant
python3 -m venv homeassistant_venv
source /srv/homeassistant/homeassistant_venv/bin/activate

#虚拟环境下安装pip
pip install --upgrade pip

#正式安装HomeAssistant，速度会非常快
pip3 install homeassistant

#先试试，运行下，等好久，看网络，最后提示运行了，不是什么正则安装xxx，就浏览器打开路由器ip:8123
hass

3.开机启动

能用了后，就想开机启动

#切换到debian子系统
chroot /mnt/sda3/debian /bin/bash  

#新建启动脚本
cd /etc/init.d/
touch hass-daemon

脚本如下,参考官方文档init.d启动，有修改

#!/bin/sh
### BEGIN INIT INFO
# Provides:          hass
# Required-Start:    $local_fs $network $named $time $syslog
# Required-Stop:     $local_fs $network $named $time $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Description:       Home\ Assistant
### END INIT INFO

# /etc/init.d Service Script for Home Assistant
# Created with: https://gist.github.com/naholyr/4275302#file-new-service-sh
PRE_EXEC="cd /srv/homeassistant; source /srv/homeassistant/homeassistant_venv/bin/activate;" #预备运行命令
# Typically /usr/bin/hass
HASS_BIN="hass"
RUN_AS="homeassistant"  #用户名
PID_DIR="/var/run/hass"
PID_FILE="$PID_DIR/hass.pid"  
CONFIG_DIR="/home/$RUN_AS/.homeassistant" #配置文件路径
LOG_DIR="/var/log/homeassistant"
LOG_FILE="$LOG_DIR/home-assistant.log"
FLAGS="-v --config $CONFIG_DIR --pid-file $PID_FILE --log-file $LOG_FILE --daemon"

start() {
  if [ ! -d "$PID_DIR" ]; then
    echo "It seems you did not run"
    echo -e "\tservice hass-daemon install"
    return 1
  fi
  if [ -f $PID_FILE ] && kill -0 $(cat $PID_FILE) 2> /dev/null; then
    echo 'Service already running' >&2
    return 1
  fi
  echo -n 'Starting service… ' >&2
  local CMD="$PRE_EXEC $HASS_BIN $FLAGS;"
  su -s /bin/bash -c "$CMD" $RUN_AS
  if [ $? -ne 0 ]; then
    echo "Failed" >&2
  else
    echo 'Done' >&2
  fi
}

stop() {
  if [ ! -f "$PID_FILE" ] || ! kill -0 $(cat "$PID_FILE") 2> /dev/null; then
    echo 'Service not running' >&2
    return 1
  fi
  echo -n 'Stopping service… ' >&2
  kill $(cat "$PID_FILE")
  while ps -p $(cat "$PID_FILE") > /dev/null 2>&1; do sleep 1;done;
  rm -f $PID_FILE
  echo 'Done' >&2
}

install() {
  echo "Installing Home Assistant Daemon (hass-daemon)"
  update-rc.d hass-daemon defaults
  create_piddir
  mkdir -p $CONFIG_DIR
  chown $RUN_AS $CONFIG_DIR
  mkdir -p $LOG_DIR
  chown $RUN_AS $LOG_DIR
}

uninstall() {
  echo "Are you really sure you want to uninstall this service? The INIT script will"
  echo -n "also be deleted! That cannot be undone. [yes|No] "
  local SURE
  read SURE
  if [ "$SURE" = "yes" ]; then
    stop
    remove_piddir
    echo "Notice: The config directory has not been removed"
    echo $CONFIG_DIR
    echo "Notice: The log directory has not been removed"
    echo $LOG_DIR
    update-rc.d -f hass-daemon remove
    rm -fv "$0"
    echo "Home Assistant Daemon has been removed. Home Assistant is still installed."
  fi
}

create_piddir() {
  if [ ! -d "$PID_DIR" ]; then
    mkdir -p $PID_DIR
    chown $RUN_AS "$PID_DIR"
  fi
}

remove_piddir() {
  if [ -d "$PID_DIR" ]; then
    if [ -e "$PID_FILE" ]; then
      rm -fv "$PID_FILE"
    fi
    rmdir -fv "$PID_DIR"
  fi
}

case "$1" in
  start)
    start
    ;;
  stop)
    stop
    ;;
  install)
    install
    ;;
  uninstall)
    uninstall
    ;;
  restart)
    stop
    start
    ;;
  *)
    echo "Usage: $0 {start|stop|restart|install|uninstall}"
esac

脚本测试

#离开子系统debian
exit

#脚本安装下，就是更新到rc.xd
chroot /mnt/sda3/debian /bin/bash service hass-daemon install
#返回如下
Installing Home Assistant Daemon (hass-daemon)

#脚本启动
chroot /mnt/sda3/debian /bin/bash service hass-daemon start

网页测试下，路由器ip:8123，ok下一步。

4. 真开机启动

还需要把启动脚本放到我们的lede x86里，

#退出debian,然后
cd /etc

#编辑rc.local文件，可以用vi，也可以用winscp
vi rc.local
在exit 0 前添加一行
chroot /debian/debian service hass-daemon start

rc.local文件如下

# Put your custom commands here that should be executed once
# the system init finished. By default this file does nothing.

chroot /debian/debian service hass-daemon start

exit 0

重启路由器，看看网页是否打得开路由器ip:8123

可以再安装个mosquitto

opkg update
opkg upgrade
opkg install mosquitto

参考:
homeassistant官网
 https://home-assistant-china.github.io/
https://home-assistant.cc/
https://bbs.hassbian.com/forum.php
https://bbs.hassbian.com/forum.php?mod=viewthread&tid=27&highlight=ubuntu
http://koolshare.cn/thread-92191-1-1.html

软路由踩坑