kubernetes最新实战生产：02-Kubernetes部署-摸一摸朋友吧

Kubernetes部署

kubernetes集群部署介绍 - kubeadm

截止到2020.04.08我们的生产环境还是V1.15.3，但这里我们使用比较新的V1.16.2版本，如果你是准备在生产环境中搭建集群，建议使用上一个版本的最大修正版V1.15.5，由于V1.16.2版本和之前的有比较大的变化，主要体现了一些APIVersion的版本变化，所以我们采用V1.16.2。

因为我们现在的目标是学习Kubernetes的知识点，所以我们选择kubeadm单点的方式部署。后面我们会单独讲kubeadm高可用的方案。

有些小伙伴会问！kubeadm现在可以上生产吗？我负责任的告诉你，完全可以！我们生产节点6个区域总worker数量 650+。

kubernetes集群部署环境准备

我们使用3个节点，都是Centos 7.7系统，内核版本：3.10.0-1062.el7.x86_64

每个节点做好hosts解析信息：

[root@k8s-master-1 ~]# cat /etc/hosts
192.168.31.210 k8s-master-1
192.168.31.211 k8s-worker-1
192.168.31.212 k8s-worker-2

每个节点禁用防火墙：

[root@k8s-master-1 ~]# systemctl stop firewalld ; systemctl disable firewalld

每个节点禁用Selinux：

[root@k8s-master-1 ~]# setenforce 0
[root@k8s-master-1 ~]# cat /etc/selinux/config
SELINUX=disabled

由于开启内核 ipv4 转发需要加载 br_netfilter 模块，所以每个节点加载该模块：

[root@k8s-master-1 ~]# modprobe br_netfilter

每个节点启动部分内核模块：

[root@k8s-master-1 ~]# cat > /etc/sysctl.d/k8s.conf <<EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_nonlocal_bind = 1
net.ipv4.ip_forward = 1
vm.swappiness=0
vm.max_map_count=655360
fs.file-max=1000000
net.ipv4.neigh.default.gc_thresh1=1024
net.ipv4.neigh.default.gc_thresh2=4096
net.ipv4.neigh.default.gc_thresh3=8192
net.core.netdev_max_backlog=10000
fs.inotify.max_user_instances=524288
fs.inotify.max_user_watches=524288
EOF

每个节点刷新内核参数，使其生效：

[root@k8s-master-1 ~]# sysctl -p /etc/sysctl.d/k8s.conf

每个节点加载ipvs模块：

[root@k8s-master-1 ~]# cat > /etc/sysconfig/modules/ipvs.modules <<EOF
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack_ipv4
EOF
[root@k8s-master-1 ~]# chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep -e ip_vs -e nf_conntrack_ipv4

可以使用 lsmod | grep -e ip_vs -e nf_conntrack_ipv4 这个命令查看是否正确加载了所需要的内核模块。

每个节点安装ipset软件包和ipvsadm管理工具：

 [root@k8s-master-1 ~]# yum install ipset ipvsadm -y

每个节点同步服务器时间：

[root@k8s-master-1 ~]# yum install chrony -y
已加载插件：fastestmirror
Loading mirror speeds from cached hostfile
 * base: mirrors.huaweicloud.com
 * extras: mirrors.huaweicloud.com
 * updates: mirrors.huaweicloud.com
软件包 chrony-3.4-1.el7.x86_64 已安装并且是最新版本
无须任何处理
[root@k8s-master-1 ~]# systemctl enable chronyd
[root@k8s-master-1 ~]# systemctl start chronyd
[root@k8s-master-1 ~]# chronyc sources
210 Number of sources = 4
MS Name/IP address         Stratum Poll Reach LastRx Last sample
===============================================================================
^- customer-vpn-proxy01.zur>     2  10   325   43m    +52ms[  +52ms] +/-  205ms
^- h199-182-204-197.ip4.unm>     2  10    25   265    +23ms[  +23ms] +/-  114ms
^* 203.107.6.88                  2  10   377   459  -8899us[-8738us] +/-   33ms
^- SunSITE.icm.edu.pl            2  10   133   749    +32ms[  +32ms] +/-  232ms

每个节点关闭swap分区：

 [root@k8s-master-1 ~]# swapoff -a

修改/etc/fstab文件，注释掉 SWAP 的自动挂载，使用free -m确认 swap 已经关闭。

每个节点安装Docker（这里推荐使用18.09版本，官方推荐的最新验证版本）：

[root@k8s-master-1 ~]# yum install -y yum-utils \
  device-mapper-persistent-data \
  lvm2
[root@k8s-master-1 ~]# yum-config-manager \
    --add-repo \
    https://download.docker.com/linux/centos/docker-ce.repo
[root@k8s-master-1 ~]# yum install docker-ce-18.09.9 -y

每个节点配置 Docker 镜像加速器：

[root@k8s-master-1 ~]# mkdir -p /etc/docker  
[root@k8s-master-1 ~]# cat > /etc/docker/daemon.json <<EOF
{
  "exec-opts": ["native.cgroupdriver=systemd"],
  "registry-mirrors" : [
    "https://ot2k4d59.mirror.aliyuncs.com/"
  ]
}
EOF

由于默认情况下 kubelet 使用的 cgroupdriver 是 systemd，所以需要保持 docker 和kubelet 的 cgroupdriver 一致，我们这里修改 docker 的 cgroupdriver=systemd。如果不修改 docker 则需要修改 kubelet 的启动配置，需要保证两者一致。

每个节点启动 Docker：

[root@k8s-master-1 ~]# systemctl start docker ; systemctl enable docker

完成Docker的启动以后，我们的基础环境就配置完了，接下来我们要进入kubeadm的配置与部署Kubernetes集群的小节了。

kubeadm kubelet kubectl安装

安装kubeadm、kubelet、kubectl

每个节点配置yum源，来安装kubeadm等组件：

[root@k8s-master-1 ~]# cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
        http://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

每个节点安装kubeadm、kubelet、kubectl：

[root@k8s-master-1 ~]# yum install -y kubelet-1.16.2 kubeadm-1.16.2 kubectl-1.16.2 --disableexcludes=kubernetes
[root@k8s-master-1 ~]# kubeadm version
kubeadm version: &version.Info{Major:"1", Minor:"16", GitVersion:"v1.16.2" ......

每个节点将 kubelet 设置成开机启动：

[root@k8s-master-1 ~]# systemctl enable --now kubelet

Kubernetes集群初始化 - 部署Master节点

使用配置文件，通过kubeadm init指令初始化集群

在master节点上配置kubeadm初始化文件，我们先导出默认的初始化配置：

[root@k8s-master-1 ~]# kubeadm config print init-defaults > kubeadm.yaml

根据我们自己的需求修改对应配置，比如修改imageRepository的值，kube-proxy为ipvs模式等等。这里我们把networking.podSubnet设置为10.244.0.0/16，因为后面我要使用flannel网络插件的：

apiVersion: kubeadm.k8s.io/v1beta2
bootstrapTokens:
- groups:
  - system:bootstrappers:kubeadm:default-node-token
  token: abcdef.0123456789abcdef
  ttl: 24h0m0s
  usages:
  - signing
  - authentication
kind: InitConfiguration
localAPIEndpoint:
  advertiseAddress: 192.168.31.210   # 填写master节点的内网ip地址
  bindPort: 6443
nodeRegistration:
  criSocket: /var/run/dockershim.sock
  name: k8s-master-1   # 填写master节点的hostname  默认会读取不需要改动
  taints:
  - effect: NoSchedule
    key: node-role.kubernetes.io/master
---
apiServer:
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta2
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controllerManager: {}
dns:
  type: CoreDNS
etcd:
  local:
    dataDir: /var/lib/etcd
imageRepository: gcr.azk8s.cn/google_containers  # 修改成微软镜像源,如果使用不了看下面的解决方案。 
kind: ClusterConfiguration
kubernetesVersion: v1.16.2  # 指定版本号
networking:
  dnsDomain: cluster.local
  podSubnet: 10.244.0.0/16  # Pod 网段，flannel插件需要使用这个网段
  serviceSubnet: 10.96.0.0/12
scheduler: {}
---
apiVersion: kubeproxy.config.k8s.io/v1alpha1
kind: KubeProxyConfiguration
mode: ipvs  # kube-proxy 模式

对于资源配置的文档比较多，想要了解完整的资源对象对应的属性，可以查看官方的godoc文档：

https://pkg.go.dev/k8s.io/kubernetes/cmd/kubeadm/app/apis/kubeadm/v1beta2?tab=doc

有的时候微软镜像源使用不了，也不能翻墙。

imageRepository: gcr.azk8s.cn/google_containers

请使用我的镜像hub下载，更改配置文件里面的镜像源即可：

imageRepository: docker.io/heyangguang123

使用配置文件，初始化Kubernetes集群：

[root@k8s-master-1 ~]# kubeadm init --config kubeadm.yaml
[init] Using Kubernetes version: v1.16.2
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Activating the kubelet service
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [k8s-master-1 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 192.168.31.210]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [k8s-master-1 localhost] and IPs [192.168.31.210 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [k8s-master-1 localhost] and IPs [192.168.31.210 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 34.507583 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.16" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Skipping phase. Please see --upload-certs
[mark-control-plane] Marking the node k8s-master-1 as control-plane by adding the label "node-role.kubernetes.io/master=''"
[mark-control-plane] Marking the node k8s-master-1 as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: abcdef.0123456789abcdef
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.31.210:6443 --token abcdef.0123456789abcdef \
    --discovery-token-ca-cert-hash sha256:a45c5128092c4dca29196f12f73982c4f01b67ddccd26bea48faf76df62d802d

拷贝kubeconfig文件：

[root@k8s-master-1 ~]# mkdir -p $HOME/.kube
[root@k8s-master-1 ~]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@k8s-master-1 ~]# sudo chown $(id -u):$(id -g) $HOME/.kube/config

kubeadm init 做了哪些事情呢？

Kubernetes集群节点添加 - 部署Worker节点

根据我们初始化集群完成后的提示，使用join命令即可

使用Join命令添加Worker节点（在worker-1和worker-2上执行）：

[root@k8s-worker-1 ~]# kubeadm join 192.168.31.210:6443 --token abcdef.0123456789abcdef \
>     --discovery-token-ca-cert-hash sha256:a45c5128092c4dca29196f12f73982c4f01b67ddccd26bea48faf76df62d802d
[preflight] Running pre-flight checks
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
[kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.16" ConfigMap in the kube-system namespace
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Activating the kubelet service
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...

This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.

Run 'kubectl get nodes' on the control-plane to see this node join the cluster.   



[root@k8s-worker-2 ~]# kubeadm join 192.168.31.210:6443 --token abcdef.0123456789abcdef \
>     --discovery-token-ca-cert-hash sha256:a45c5128092c4dca29196f12f73982c4f01b67ddccd26bea48faf76df62d802d
[preflight] Running pre-flight checks
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
[kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.16" ConfigMap in the kube-system namespace
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Activating the kubelet service
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...

This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.

Run 'kubectl get nodes' on the control-plane to see this node join the cluster.

如果忘记了上面的 join 命令可以使用命令 kubeadm token create --print-join-command 重新获取。

注意：初始化的join token只有2个小时有效期，过期了请使用上面命令重新获取！

查看当前集群节点信息（在Master节点上执行，NotReady状态是正常的！）：

[root@k8s-master-1 ~]# kubectl get nodes
NAME           STATUS     ROLES    AGE     VERSION
k8s-master-1   NotReady   master   2m42s   v1.16.2
k8s-worker-1   NotReady   <none>   51s     v1.16.2
k8s-worker-2   NotReady   <none>   50s     v1.16.2

kubeadm join 又是如何进行的呢？

部署网络插件Flannel

部署网络插件flannel

到这里的，会发现我们现在集群的状态都是NotReady状态，不要惊慌！基本操作！这是因为还没有安装网络查件导致的，接下来我们部署Flannel网络插件（Master节点上执行）：

# 下载网络插件部署的yaml，需要翻墙，如果不能翻墙的，请点击下面的github下载。
# https://github.com/heyangguang/kubernetes-doc/blob/master/yaml/02-install-k8s/kube-flannel.yml
[root@k8s-master-1 ~]# wget https://raw.githubusercontent.com/coreos/flannel/2140ac876ef134e0ed5af15c65e414cf26827915/Documentation/kube-flannel.yml

# 因为有节点是多网卡，所以需要在资源清单文件中指定内网网卡
# 搜索到名为 kube-flannel-ds-amd64 的 DaemonSet，在kube-flannel容器下面
[root@k8s-master-1 ~]# vim kube-flannel.yml
......
initContainers:
      - name: install-cni
        image: heyangguang123/flannel:v0.11.0-amd64 # 更改镜像地址
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: heyangguang123/flannel:v0.11.0-amd64 # 更改镜像地址
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        - --iface=ens33  # 指定内网网卡的名称
......

# 部署 flannel 网络插件
[root@k8s-master-1 ~]# kubectl apply -f kube-flannel.yml

网络插件很多，可以在这个链接中选择网络插件：

https://kubernetes.io/docs/setup/production-environment/tools/kubeadm/create-cluster-kubeadm/

等一会，查看Pod的运行状态：

[root@k8s-master-1 ~]# kubectl get pods -n kube-system
NAME                                   READY   STATUS    RESTARTS   AGE
coredns-5fbf5bb7b4-b6hvr               1/1     Running   0          14m
coredns-5fbf5bb7b4-c8tpg               1/1     Running   0          14m
etcd-k8s-master-1                      1/1     Running   0          13m
kube-apiserver-k8s-master-1            1/1     Running   0          13m
kube-controller-manager-k8s-master-1   1/1     Running   0          13m
kube-flannel-ds-amd64-9rndl            1/1     Running   0          2m13s
kube-flannel-ds-amd64-v7jkk            1/1     Running   0          2m13s
kube-flannel-ds-amd64-zgt6j            1/1     Running   0          2m13s
kube-proxy-6m2lv                       1/1     Running   0          12m
kube-proxy-nxxlj                       1/1     Running   0          12m
kube-proxy-xjxxp                       1/1     Running   0          14m
kube-scheduler-k8s-master-1            1/1     Running   0          13m

都是Running以后，我们查看node状态：

[root@k8s-master-1 ~]# kubectl get nodes
NAME           STATUS   ROLES    AGE   VERSION
k8s-master-1   Ready    master   14m   v1.16.2
k8s-worker-1   Ready    <none>   12m   v1.16.2
k8s-worker-2   Ready    <none>   12m   v1.16.2

本篇文章，到这里就结束了，回顾一下，这篇文章我们主要是学习了基础环境的搭建、Kubernetes的部署、kubeadm的init join流程、Flannel网络插件的部署。下一篇文章：Kubernetes Dashboard-给朋友穿上一件酷酷的外套。

最后编辑于 ：
©著作权归作者所有,转载或内容合作请联系作者
  • 人面猴
    序言：七十年代末，一起剥皮案震惊了整个滨河市，随后出现的几起案子，更是在滨河造成了极大的恐慌，老刑警刘岩，带你破解...
    沈念sama阅读 196,264评论 5赞 462
  • 死咒
    序言：滨河连续发生了三起死亡事件，死亡现场离奇诡异，居然都是意外死亡，警方通过查阅死者的电脑和手机，发现死者居然都...
    沈念sama阅读 82,549评论 2赞 373
  • 救了他两次的神仙让他今天三更去死
    文/潘晓璐 我一进店门，熙熙楼的掌柜王于贵愁眉苦脸地迎上来，“玉大人，你说我怎么就摊上这事。” “怎么了？”我有些...
    开封第一讲书人阅读 143,389评论 0赞 325
  • 道士缉凶录：失踪的卖姜人
    文/不坏的土叔 我叫张陵，是天一观的道长。 经常有香客问我，道长，这世上最难降的妖魔是什么？ 我笑而不...
    开封第一讲书人阅读 52,616评论 1赞 267
  • 港岛之恋（遗憾婚礼）
    正文 为了忘掉前任，我火速办了婚礼，结果婚礼上，老公的妹妹穿的比我还像新娘。我一直安慰自己，他们只是感情好，可当我...
    茶点故事阅读 61,461评论 5赞 358
  • 恶毒庶女顶嫁案：这布局不是一般人想出来的
    文/花漫 我一把揭开白布。 她就那样静静地躺着，像睡着了一般。 火红的嫁衣衬着肌肤如雪。 梳的纹丝不乱的头发上，一...
    开封第一讲书人阅读 46,351评论 1赞 273
  • 城市分裂传说
    那天，我揣着相机与录音，去河边找鬼。 笑死，一个胖子当着我的面吹牛，可吹牛的内容都是我干的。 我是一名探鬼主播，决...
    沈念sama阅读 36,776评论 3赞 387
  • 双鸳鸯连环套：你想象不到人心有多黑
    文/苍兰香墨 我猛地睁开眼，长吁一口气：“原来是场噩梦啊……” “哼！你这毒妇竟也来了？” 一声冷哼从身侧响起，我...
    开封第一讲书人阅读 35,414评论 0赞 255
  • 万荣杀人案实录
    序言：老挝万荣一对情侣失踪，失踪者是张志新（化名）和其女友刘颖，没想到半个月后，有当地人在树林里发现了一具尸体，经...
    沈念sama阅读 39,722评论 1赞 294
  • 护林员之死
    正文 独居荒郊野岭守林人离奇死亡，尸身上长有42处带血的脓包…… 初始之章·张勋 以下内容为张勋视角 年9月15日...
    茶点故事阅读 34,760评论 2赞 314
  • 白月光启示录
    正文 我和宋清朗相恋三年，在试婚纱的时候发现自己被绿了。 大学时的朋友给我发了我未婚夫和他白月光在一起吃饭的照片。...
    茶点故事阅读 36,537评论 1赞 326
  • 活死人
    序言：一个原本活蹦乱跳的男人离奇死亡，死状恐怖，灵堂内的尸体忽然破棺而出，到底是诈尸还是另有隐情，我是刑警宁泽，带...
    沈念sama阅读 32,381评论 3赞 315
  • 日本核电站爆炸内幕
    正文 年R本政府宣布，位于F岛的核电站，受9级特大地震影响，放射性物质发生泄漏。R本人自食恶果不足惜，却给世界环境...
    茶点故事阅读 37,787评论 3赞 300
  • 男人毒药：我在死后第九天来索命
    文/蒙蒙 一、第九天 我趴在偏房一处隐蔽的房顶上张望。 院中可真热闹，春花似锦、人声如沸。这庄子的主人今日做“春日...
    开封第一讲书人阅读 29,030评论 0赞 19
  • 一桩弑父案，背后竟有这般阴谋
    文/苍兰香墨 我抬头看了看天上的太阳。三九已至，却和暖如春，着一层夹袄步出监牢的瞬间，已是汗流浃背。 一阵脚步声响...
    开封第一讲书人阅读 30,304评论 1赞 252
  • 情欲美人皮
    我被黑心中介骗来泰国打工， 没想到刚下飞机就差点儿被人妖公主榨干…… 1. 我叫王不留，地道东北人。 一个月前我还...
    沈念sama阅读 41,734评论 2赞 342
  • 代替公主和亲
    正文 我出身青楼，却偏偏与公主长得像，于是被迫代替她去往敌国和亲。 传闻我的和亲对象是个残疾皇子，可洞房花烛夜当晚...
    茶点故事阅读 40,943评论 2赞 336