#include <stdint.h>
#include <stdio.h>
/* For sleep() */
#include <unistd.h>
/* Driver Header files */
#include <ti/drivers/ADCBuf.h>
#include <ti/drivers/UART.h>
/* Example/Board Header files */
#include "Board.h"
#include "math.h"
#define ADCBUFFERSIZE (50)
#define UARTBUFFERSIZE ((20 * ADCBUFFERSIZE) + 24) //
unsigned int tempcum=0;
unsigned int Rnte=0;
double T1temp=0;
uint16_t sampleBufferOne[ADCBUFFERSIZE];
uint16_t sampleBufferTwo[ADCBUFFERSIZE];
uint32_t microVoltBuffer[ADCBUFFERSIZE];
uint32_t buffersCompletedCounter = 0;
char uartTxBuffer[UARTBUFFERSIZE];
/* Driver handle shared between the task and the callback function */
UART_Handle uart;
/*
* This function is called whenever an ADC buffer is full.
* The content of the buffer is then converted into human-readable format and
* sent to the PC via UART.
*/
void adcBufCallback(ADCBuf_Handle handle, ADCBuf_Conversion *conversion,
void *completedADCBuffer, uint32_t completedChannel)
{
uint_fast16_t i;
uint_fast16_t uartTxBufferOffset = 0;
// unsigned int Unte=0;
// float x1,x2;
/* Adjust raw ADC values and convert them to microvolts 调整原始ADC值，并将其转换为微伏 */
ADCBuf_adjustRawValues(handle, completedADCBuffer, ADCBUFFERSIZE,
completedChannel);
ADCBuf_convertAdjustedToMicroVolts(handle, completedChannel,
completedADCBuffer, microVoltBuffer, ADCBUFFERSIZE);
/* Start with a header message. */
uartTxBufferOffset = snprintf(uartTxBuffer,
UARTBUFFERSIZE - uartTxBufferOffset, "\r\nBuffer %u finished.",
(unsigned int)buffersCompletedCounter++);
/* Write raw adjusted values to the UART buffer if there is room. */
uartTxBufferOffset += snprintf(uartTxBuffer + uartTxBufferOffset,
UARTBUFFERSIZE - uartTxBufferOffset, "\r\nRaw Buffer: ");
for (i = 0; i < ADCBUFFERSIZE && uartTxBufferOffset < UARTBUFFERSIZE; i++) {
uartTxBufferOffset += snprintf(uartTxBuffer + uartTxBufferOffset,
UARTBUFFERSIZE - uartTxBufferOffset, "%u,",
*(((uint16_t *)completedADCBuffer) + i));
// tempcum+= *(((uint16_t *)completedADCBuffer) + i);
}
// uartTxBufferOffset += snprintf(uartTxBuffer + uartTxBufferOffset,
// UARTBUFFERSIZE - uartTxBufferOffset, "%u,",
// tempcum/ADCBUFFERSIZE);
// Unte=tempcum/ADCBUFFERSIZE;
// tempcum=0;
/* Write microvolt values to the UART buffer if there is room.电压值 */
if (uartTxBufferOffset < UARTBUFFERSIZE) {
uartTxBufferOffset += snprintf(uartTxBuffer + uartTxBufferOffset,
UARTBUFFERSIZE - uartTxBufferOffset, "\r\nMicrovolts: ");
for (i = 0; i < ADCBUFFERSIZE && uartTxBufferOffset < UARTBUFFERSIZE; i++) {
uartTxBufferOffset += snprintf(uartTxBuffer + uartTxBufferOffset,
UARTBUFFERSIZE - uartTxBufferOffset, "%u,",
(unsigned int)microVoltBuffer[i]);
// tempcum+= (unsigned int)microVoltBuffer[i];
}
// uartTxBufferOffset += snprintf(uartTxBuffer + uartTxBufferOffset,
// UARTBUFFERSIZE - uartTxBufferOffset, "%u,",
// tempcum/ADCBUFFERSIZE);
// Rnte=((3300-Unte)*10000/Unte);
//
// uartTxBufferOffset += snprintf(uartTxBuffer + uartTxBufferOffset,
// UARTBUFFERSIZE - uartTxBufferOffset, "\r\nRntc:%u,",
// Rnte);
//
// x1=log(((float)Rnte)/10000);
// uartTxBufferOffset += snprintf(uartTxBuffer + uartTxBufferOffset,
// UARTBUFFERSIZE - uartTxBufferOffset, "\r\nx1:%f,",
// x1);
//
// x2=1/(273.25+25);
// uartTxBufferOffset += snprintf(uartTxBuffer + uartTxBufferOffset,
// UARTBUFFERSIZE - uartTxBufferOffset, "\r\nx2:%f,",
// x2);
//
// T1temp=(x1/3435)+x2;
// uartTxBufferOffset += snprintf(uartTxBuffer + uartTxBufferOffset,
// UARTBUFFERSIZE - uartTxBufferOffset, "\r\nT1temp1:%f,",
// T1temp);
//
// T1temp=(1/T1temp)-273.15;
// uartTxBufferOffset += snprintf(uartTxBuffer + uartTxBufferOffset,
// UARTBUFFERSIZE - uartTxBufferOffset, "\r\nT1temp2:%f,",
// T1temp);
// tempcum=0;
}
/*
* Ensure we don't write outside the buffer.
* Append a newline after the data.
*/
if (uartTxBufferOffset < UARTBUFFERSIZE) {
uartTxBuffer[uartTxBufferOffset++] = '\n';
}
else {
uartTxBuffer[UARTBUFFERSIZE-1] = '\n';
}
/* Display the data via UART */
UART_write(uart, uartTxBuffer, uartTxBufferOffset);
}
int ad_read(void);
/*
* Callback function to use the UART in callback mode. It does nothing.
*/
void uartCallback(UART_Handle handle, void *buf, size_t count) {
return;
}
/*
* ======== mainThread ========
*/
void *mainThread(void *arg0)
{
UART_Params uartParams;
ADCBuf_Params adcBufParams;
/* Call driver init functions */
ADCBuf_init();
UART_init();
/* Create a UART with data processing off. */
UART_Params_init(&uartParams);
uartParams.writeDataMode = UART_DATA_BINARY;
uartParams.writeMode = UART_MODE_CALLBACK;
uartParams.writeCallback = uartCallback;
uartParams.baudRate = 115200;
uart = UART_open(Board_UART0, &uartParams);
/* Set up an ADCBuf peripheral in ADCBuf_RECURRENCE_MODE_CONTINUOUS */
ADCBuf_Params_init(&adcBufParams);
// adcBufParams.callbackFxn = NULL;
//// adcBufParams.blockingTimeout=10000;
// adcBufParams.recurrenceMode = ADCBuf_RECURRENCE_MODE_ONE_SHOT;//循环模式设置为继续
// adcBufParams.returnMode = ADCBuf_RETURN_MODE_BLOCKING;//返回模式为callback
// adcBufParams.samplingFrequency = 100*1000;//差不多200ms发送一次echo
// adcBuf = ADCBuf_open(Board_ADCBUF0,&adcBufParams); //打开adcbuf
// ADCBuf_Conversion continuousConversion;
// /* Configure the conversion struct */
// continuousConversion.arg = NULL;
// continuousConversion.adcChannel = Board_ADCBUF0CHANNEL0;//选用通道0
// continuousConversion.sampleBuffer = sampleBufferOne;//转换数据存储数组的关联，stop
// continuousConversion.sampleBufferTwo = sampleBufferTwo;//转换数据存储数组的关联.continuous
// continuousConversion.samplesRequestedCount = ADCBUFFERSIZE;//样本数量
// if (adcBuf == NULL){
// /* ADCBuf failed to open. */
// while(1);
// }
// /* Start converting. */
// if (ADCBuf_convert(adcBuf, &continuousConversion, 1) !=
// ADCBuf_STATUS_SUCCESS) {
// /* Did not start conversion process correctly. */
// while(1);
// }
while(1) {
ad_read();
// sleep(1000);
sleep(3); //测低参与
}
}
uint32_t value= 0;
uint32_t value_Sample= 0;
int_fast16_t test_data=0;
int ad_read(void)
{
ADCBuf_Handle adcBuf;
ADCBuf_Params adcBufParams;
ADCBuf_Conversion continuousConversion;
uint16_t i;
float x1,x2;
/* Set up an ADCBuf peripheral in ADCBuf_RECURRENCE_MODE_CONTINUOUS */
ADCBuf_Params_init(&adcBufParams);
adcBufParams.callbackFxn = NULL;
// adcBufParams.blockingTimeout=10000;
adcBufParams.recurrenceMode = ADCBuf_RECURRENCE_MODE_ONE_SHOT;//循环模式设置为继续
adcBufParams.returnMode = ADCBuf_RETURN_MODE_BLOCKING;//返回模式为callback
adcBufParams.samplingFrequency = 100*1000;//差不多200ms发送一次echo
adcBuf = ADCBuf_open(Board_ADCBUF0,&adcBufParams); //打开adcbuf
if(adcBuf)
{
/* Configure the conversion struct */
continuousConversion.arg = NULL;
continuousConversion.adcChannel = Board_ADCBUF0CHANNEL0;//选用通道0
continuousConversion.sampleBuffer = sampleBufferOne;//转换数据存储数组的关联，stop
continuousConversion.sampleBufferTwo = sampleBufferTwo;//转换数据存储数组的关联.continuous
continuousConversion.samplesRequestedCount = ADCBUFFERSIZE;//样本数量
test_data =ADCBuf_convert(adcBuf, &continuousConversion, 1);
if (test_data == ADCBuf_STATUS_SUCCESS) {
/* 调整原始ADC值并将其转换为微伏 */
ADCBuf_adjustRawValues(adcBuf,sampleBufferOne,ADCBUFFERSIZE,
Board_ADCBUF0CHANNEL0);
test_data=ADCBuf_convertAdjustedToMicroVolts(adcBuf,Board_ADCBUF0CHANNEL0,
sampleBufferOne,microVoltBuffer,ADCBUFFERSIZE);
for(i = 0; i <ADCBUFFERSIZE; i++)
{
value += microVoltBuffer[i];
value_Sample +=sampleBufferOne[i];
}
value /= ADCBUFFERSIZE;
value_Sample /= ADCBUFFERSIZE;
Rnte=((3300-value_Sample)*10000/value_Sample);
x1=log(((float)Rnte)/10000);
x2=1/(273.25+25);
T1temp=(x1/3435)+x2;
T1temp=(1/T1temp)-273.15;
}
ADCBuf_close(adcBuf); //关闭adcbuf
return T1temp;
}
return -1;
}
cc1310 NTC的单次ADC读取数据
©著作权归作者所有,转载或内容合作请联系作者
- 文/潘晓璐 我一进店门，熙熙楼的掌柜王于贵愁眉苦脸地迎上来，“玉大人，你说我怎么就摊上这事。” “怎么了？”我有些...
- 文/花漫 我一把揭开白布。 她就那样静静地躺着，像睡着了一般。 火红的嫁衣衬着肌肤如雪。 梳的纹丝不乱的头发上，一...
- 文/苍兰香墨 我猛地睁开眼，长吁一口气：“原来是场噩梦啊……” “哼！你这毒妇竟也来了？” 一声冷哼从身侧响起，我...
