上篇文章中我们了解到了setContentView()背后所发生的事情.先用上一篇文章最后总结的图片来回顾一下setContentView()的流程.

寻找我们的 mDecor

既然我们在PhoneWindow里没有发现mDecor是如何添加到window上的.那么我就需要到别的地方去寻找mDecor的线索,那我们要该从哪入手呢?还记得上一篇我们从Activity的setContentView()出发时,最终调用的是mWindow(PhoneWindow)的setContentView()函数,而mDecor是PhoneWindow的成员变量,mWindow是Activity的成员变量,那么我们可以在Activity的代码中寻找一下我们的线索mDecor.
果然通过在Activity代码中进行mDecor的关键字搜索,我们找到了线索.

View mDecor = null;
void makeVisible() {
        if (!mWindowAdded) {
            ViewManager wm = getWindowManager();
            wm.addView(mDecor, getWindow().getAttributes());
            mWindowAdded = true;
        }
        mDecor.setVisibility(View.VISIBLE);
}

从上面的代码可以看到Activity通过WindowManager的addView()方法将mDecor添加到Window上.但我们发现这里的mDecor与PhoneWindow中的mDecor好像并不相同.而且在代码中(Activity代码中的mDecor)与(PhoneWindow的mDecor)并没有明显的联系在一起.难道线索就这么断了?我决定使用绝招(搜索引擎),果然我找到了另一个切入点.
经过一番Internet后,我知道了View的布局绘制是发生在Activity的创建过程,而Activity的创建是由一个名为ActivityThread的类进行控制的.下面我们来验证一下,看看能否找到线索.
首先我们找到ActivityThread的源码,这里有两种方法:

1. 直接在Internet上阅读在线的源码
2. 在Android Studio中新建一个简单的工程,在MainActivity的onCreate()函数中下一个断点,然后运行调试.我们可以在调试工具的调用栈中找到ActivityThread.
   

找到了ActivityThread的源码后,对makeVisible关键字进行搜索,果然找到了调用的地方,在handleResumeActivity()中出现了makeVisible()的调用,既然出现了相关的调用,那我们就看一下handleResumeActivity()的代码吧.

 final void handleResumeActivity(IBinder token,
            boolean clearHide, boolean isForward, boolean reallyResume) {
        // If we are getting ready to gc after going to the background, well
        // we are back active so skip it.
        unscheduleGcIdler();
        mSomeActivitiesChanged = true;

        // TODO Push resumeArgs into the activity for consideration
        ActivityClientRecord r = performResumeActivity(token, clearHide);

        if (r != null) {
            final Activity a = r.activity;

            if (localLOGV) Slog.v(
                TAG, "Resume " + r + " started activity: " +
                a.mStartedActivity + ", hideForNow: " + r.hideForNow
                + ", finished: " + a.mFinished);

            final int forwardBit = isForward ?
                    WindowManager.LayoutParams.SOFT_INPUT_IS_FORWARD_NAVIGATION : 0;
            
            // If the window hasn't yet been added to the window manager,
            // and this guy didn't finish itself or start another activity,
            // then go ahead and add the window.
            boolean willBeVisible = !a.mStartedActivity;// 标记1开始
            if (!willBeVisible) {
                try {
                    willBeVisible = ActivityManagerNative.getDefault().willActivityBeVisible(
                            a.getActivityToken());
                } catch (RemoteException e) {
                }
            }
            if (r.window == null && !a.mFinished && willBeVisible) {
                r.window = r.activity.getWindow();
                View decor = r.window.getDecorView();
                decor.setVisibility(View.INVISIBLE);
                ViewManager wm = a.getWindowManager();
                WindowManager.LayoutParams l = r.window.getAttributes();
                a.mDecor = decor;
                l.type = WindowManager.LayoutParams.TYPE_BASE_APPLICATION;
                l.softInputMode |= forwardBit;
                if (a.mVisibleFromClient) {
                    a.mWindowAdded = true;
                    wm.addView(decor, l);
                }

            // If the window has already been added, but during resume
            // we started another activity, then don't yet make the
            // window visible.
            } else if (!willBeVisible) {
                if (localLOGV) Slog.v(
                    TAG, "Launch " + r + " mStartedActivity set");
                r.hideForNow = true;
            } // 标注 1结束

            // Get rid of anything left hanging around.
            cleanUpPendingRemoveWindows(r);

            // The window is now visible if it has been added, we are not
            // simply finishing, and we are not starting another activity.
            // 标注 2开始
            if (!r.activity.mFinished && willBeVisible
                    && r.activity.mDecor != null && !r.hideForNow) {
                if (r.newConfig != null) {
                    r.tmpConfig.setTo(r.newConfig);
                    if (r.overrideConfig != null) {
                        r.tmpConfig.updateFrom(r.overrideConfig);
                    }
                    if (DEBUG_CONFIGURATION) Slog.v(TAG, "Resuming activity "
                            + r.activityInfo.name + " with newConfig " + r.tmpConfig);
                    performConfigurationChanged(r.activity, r.tmpConfig);
                    freeTextLayoutCachesIfNeeded(r.activity.mCurrentConfig.diff(r.tmpConfig));
                    r.newConfig = null;
                }
                if (localLOGV) Slog.v(TAG, "Resuming " + r + " with isForward="
                        + isForward);
                WindowManager.LayoutParams l = r.window.getAttributes();
                if ((l.softInputMode
                        & WindowManager.LayoutParams.SOFT_INPUT_IS_FORWARD_NAVIGATION)
                        != forwardBit) {
                    l.softInputMode = (l.softInputMode
                            & (~WindowManager.LayoutParams.SOFT_INPUT_IS_FORWARD_NAVIGATION))
                            | forwardBit;
                    if (r.activity.mVisibleFromClient) {
                        ViewManager wm = a.getWindowManager();
                        View decor = r.window.getDecorView();
                        wm.updateViewLayout(decor, l);
                    }
                }
                r.activity.mVisibleFromServer = true;
                mNumVisibleActivities++;
                if (r.activity.mVisibleFromClient) {
                    r.activity.makeVisible();
                }
            }
            // 标注 2结束

            if (!r.onlyLocalRequest) {
                r.nextIdle = mNewActivities;
                mNewActivities = r;
                if (localLOGV) Slog.v(
                    TAG, "Scheduling idle handler for " + r);
                Looper.myQueue().addIdleHandler(new Idler());
            }
            r.onlyLocalRequest = false;

            // Tell the activity manager we have resumed.
            if (reallyResume) {
                try {
                    ActivityManagerNative.getDefault().activityResumed(token);
                } catch (RemoteException ex) {
                }
            }

        } else {
            // If an exception was thrown when trying to resume, then
            // just end this activity.
            try {
                ActivityManagerNative.getDefault()
                    .finishActivity(token, Activity.RESULT_CANCELED, null, false);
            } catch (RemoteException ex) {
            }
        }
    }

代码有点长,但我们只需关注两个部分,我已经在代码上做了标注.先来看一下标注1的代码.

            // If the window hasn't yet been added to the window manager,
            // and this guy didn't finish itself or start another activity,
            // then go ahead and add the window.
            boolean willBeVisible = !a.mStartedActivity;// 标记1开始
            if (!willBeVisible) {
                try {
                    willBeVisible = ActivityManagerNative.getDefault().willActivityBeVisible(
                            a.getActivityToken());
                } catch (RemoteException e) {
                }
            }
            // 关键部分
            if (r.window == null && !a.mFinished && willBeVisible) {
                // 1
                r.window = r.activity.getWindow(); 
                // 2
                View decor = r.window.getDecorView(); 
                decor.setVisibility(View.INVISIBLE);
                // 3
                ViewManager wm = a.getWindowManager();
                WindowManager.LayoutParams l = r.window.getAttributes();
                // 4
                a.mDecor = decor;
                l.type = WindowManager.LayoutParams.TYPE_BASE_APPLICATION;
                l.softInputMode |= forwardBit;
                if (a.mVisibleFromClient) {
                    a.mWindowAdded = true;
                    // 5
                    wm.addView(decor, l);
                }

            // If the window has already been added, but during resume
            // we started another activity, then don't yet make the
            // window visible.
            } else if (!willBeVisible) {
                if (localLOGV) Slog.v(
                    TAG, "Launch " + r + " mStartedActivity set");
                r.hideForNow = true;
            } // 标注 1结束

其中这里的r,a分别是函数中的局部变量,r是一个ActivityClientRecord类型的对象,通过performResumeActivity()函数获取,代表的是Activity执行完onResume()之后的含有Activity相关状态信息的对象.而a则是r所对应的Activity.清楚了这两个变量的意义后,我们可以对代码进行分析了.首先获取了willBeVisible的值,它代表的是activity是否将要显示在手机屏幕上.接着来到被标注为关键部分的if语句块内的代码.代码主要做了下面的事情(我已在上面的代码中标出了对应的代码句).

1. 将r.window赋值为activity的mWindow(即PhoneWindow对象)
2. 获取r.window的DecorView对象(即我们PhoneWindow的mDecor对象),并将其设置为不可见
3. 获取activity的mWindowManager对象和r.window的布局参数
4. 将第2点获取的DecorView对象赋值给a.mDecor((将PhoneWindow的mDecor)与(Activity的mDecor)关联起来)
5. 通过第3点获取的mWindowManager对象根据布局参数将mDecor添加到window上.

通过上面的代码,我们成功的将mDecor添加到window当中,但我们的mDecor还是不可见的,所以下面将要分析的标注2的代码就是让mDecor变得可见.

            // The window is now visible if it has been added, we are not
            // simply finishing, and we are not starting another activity.
            // 标注 2开始
            if (!r.activity.mFinished && willBeVisible
                    && r.activity.mDecor != null && !r.hideForNow) {
                if (r.newConfig != null) {
                    r.tmpConfig.setTo(r.newConfig);
                    if (r.overrideConfig != null) {
                        r.tmpConfig.updateFrom(r.overrideConfig);
                    }
                    if (DEBUG_CONFIGURATION) Slog.v(TAG, "Resuming activity "
                            + r.activityInfo.name + " with newConfig " + r.tmpConfig);
                    performConfigurationChanged(r.activity, r.tmpConfig);
                    freeTextLayoutCachesIfNeeded(r.activity.mCurrentConfig.diff(r.tmpConfig));
                    r.newConfig = null;
                }
                if (localLOGV) Slog.v(TAG, "Resuming " + r + " with isForward="
                        + isForward);
                WindowManager.LayoutParams l = r.window.getAttributes();
                if ((l.softInputMode
                        & WindowManager.LayoutParams.SOFT_INPUT_IS_FORWARD_NAVIGATION)
                        != forwardBit) {
                    l.softInputMode = (l.softInputMode
                            & (~WindowManager.LayoutParams.SOFT_INPUT_IS_FORWARD_NAVIGATION))
                            | forwardBit;
                    if (r.activity.mVisibleFromClient) {
                        ViewManager wm = a.getWindowManager();
                        View decor = r.window.getDecorView();
                        wm.updateViewLayout(decor, l);
                    }
                }
                r.activity.mVisibleFromServer = true;
                mNumVisibleActivities++;
                if (r.activity.mVisibleFromClient) {
                    r.activity.makeVisible();
                }
            }
            // 标注 2结束

其实上面的代码我们需要关心的就只有一句,就是r.activity.makeVisible();这句.这句话调用了我们之前在Activity源码中找到的makeVisible()函数,将mDecor设置为可见.到此,我们知道了mDecor是怎样添加到window上的了.

是终点也是起点

作为一个热爱技术的年轻人(码农),怎么可能会在这里就停止前进的脚步呢?所以在上面makeVisible()函数中的一句代码wm.addView(mDecor, getWindow().getAttributes());展开了新的起点 - - - 继续探索View的工作原理(希望能有新的发现).
我毫不犹豫的点进了addView()的源码,却发现这是ViewManager接口的方法.

 /** Interface to let you add and remove child views to an Activity. To get an instance
  * of this class, call {@link android.content.Context#getSystemService(java.lang.String) Context.getSystemService()}.
  */
public interface ViewManager
{
    /**
     * Assign the passed LayoutParams to the passed View and add the view to the window.
     * <p>Throws {@link android.view.WindowManager.BadTokenException} for certain programming
     * errors, such as adding a second view to a window without removing the first view.
     * <p>Throws {@link android.view.WindowManager.InvalidDisplayException} if the window is on a
     * secondary {@link Display} and the specified display can't be found
     * (see {@link android.app.Presentation}).
     * @param view The view to be added to this window.
     * @param params The LayoutParams to assign to view.
     */
    public void addView(View view, ViewGroup.LayoutParams params);
    public void updateViewLayout(View view, ViewGroup.LayoutParams params);
    public void removeView(View view);
}

这个接口是用于将View添加到Activity或从Activity移除View的.既然这样,那就去找它的实现类.从下面Activity的部分源码中不难发现addView()是通过Activity的mWindowManger调用的,而Activity的mWindowManager是通过Window获取的.

    private WindowManager mWindowManager;
    private Window mWindow;
    /** Retrieve the window manager for showing custom windows. */
    public WindowManager getWindowManager() {
        return mWindowManager;
    }
     final void attach(Context context, ActivityThread aThread,
            Instrumentation instr, IBinder token, int ident,
            Application application, Intent intent, ActivityInfo info,
            CharSequence title, Activity parent, String id,
            NonConfigurationInstances lastNonConfigurationInstances,
            Configuration config, String referrer, IVoiceInteractor voiceInteractor) {
            ........
            mWindowManager = mWindow.getWindowManager();
            ........
     }

由此我们可以转到Window的源码中寻找mWindowManager的下落.在Window的源码中,很容易就能找到我们的mWindowManager的相关代码了.

    private WindowManager mWindowManager;
    /**
     * Set the window manager for use by this Window to, for example,
     * display panels.  This is <em>not</em> used for displaying the
     * Window itself -- that must be done by the client.
     *
     * @param wm The window manager for adding new windows.
     */
    public void setWindowManager(WindowManager wm, IBinder appToken, String appName,
            boolean hardwareAccelerated) {
        mAppToken = appToken;
        mAppName = appName;
        mHardwareAccelerated = hardwareAccelerated
                || SystemProperties.getBoolean(PROPERTY_HARDWARE_UI, false);
        if (wm == null) {
            wm = (WindowManager)mContext.getSystemService(Context.WINDOW_SERVICE);
        }
        mWindowManager = ((WindowManagerImpl)wm).createLocalWindowManager(this);
    }

这里的mWindowManager是通过WindowManagerImpl的createLocalWindowManager()函数进行赋值的.所以继续转到WindowManagerImpl的代码中.在WindowManagerImpl的代码中终于发现了想要的addView()的代码了.

    @Override
    public void addView(@NonNull View view, @NonNull ViewGroup.LayoutParams params) {
        applyDefaultToken(params);
        mGlobal.addView(view, params, mDisplay, mParentWindow);
    }
    private final WindowManagerGlobal mGlobal = WindowManagerGlobal.getInstance();

可以看出WindowManagerImpl中的addView()调用的是mGlobal(WindowManagerGlobal)的addView().看来我们的代码还没结束...自己挖的坑,再深也要走下去,继续跳转到WindowManagerGlobal的addView()代码里.看来这次是到达了真正的目的地了.

    public void addView(View view, ViewGroup.LayoutParams params,
            Display display, Window parentWindow) {
        if (view == null) {
            throw new IllegalArgumentException("view must not be null");
        }
        if (display == null) {
            throw new IllegalArgumentException("display must not be null");
        }
        if (!(params instanceof WindowManager.LayoutParams)) {
            throw new IllegalArgumentException("Params must be WindowManager.LayoutParams");
        }

        final WindowManager.LayoutParams wparams = (WindowManager.LayoutParams) params;
        if (parentWindow != null) {
            parentWindow.adjustLayoutParamsForSubWindow(wparams);
        } else {
            // If there's no parent, then hardware acceleration for this view is
            // set from the application's hardware acceleration setting.
            final Context context = view.getContext();
            if (context != null
                    && (context.getApplicationInfo().flags
                            & ApplicationInfo.FLAG_HARDWARE_ACCELERATED) != 0) {
                wparams.flags |= WindowManager.LayoutParams.FLAG_HARDWARE_ACCELERATED;
            }
        }

        ViewRootImpl root;
        View panelParentView = null;

        synchronized (mLock) {
            // Start watching for system property changes.
            if (mSystemPropertyUpdater == null) {
                mSystemPropertyUpdater = new Runnable() {
                    @Override public void run() {
                        synchronized (mLock) {
                            for (int i = mRoots.size() - 1; i >= 0; --i) {
                                mRoots.get(i).loadSystemProperties();
                            }
                        }
                    }
                };
                SystemProperties.addChangeCallback(mSystemPropertyUpdater);
            }

            int index = findViewLocked(view, false);
            if (index >= 0) {
                if (mDyingViews.contains(view)) {
                    // Don't wait for MSG_DIE to make it's way through root's queue.
                    mRoots.get(index).doDie();
                } else {
                    throw new IllegalStateException("View " + view
                            + " has already been added to the window manager.");
                }
                // The previous removeView() had not completed executing. Now it has.
            }

            // If this is a panel window, then find the window it is being
            // attached to for future reference.
            if (wparams.type >= WindowManager.LayoutParams.FIRST_SUB_WINDOW &&
                    wparams.type <= WindowManager.LayoutParams.LAST_SUB_WINDOW) {
                final int count = mViews.size();
                for (int i = 0; i < count; i++) {
                    if (mRoots.get(i).mWindow.asBinder() == wparams.token) {
                        panelParentView = mViews.get(i);
                    }
                }
            }
            // 标注
            root = new ViewRootImpl(view.getContext(), display);

            view.setLayoutParams(wparams);

            mViews.add(view);
            mRoots.add(root);
            mParams.add(wparams);
        }

        // do this last because it fires off messages to start doing things
        try {
            root.setView(view, wparams, panelParentView);
        } catch (RuntimeException e) {
            // BadTokenException or InvalidDisplayException, clean up.
            synchronized (mLock) {
                final int index = findViewLocked(view, false);
                if (index >= 0) {
                    removeViewLocked(index, true);
                }
            }
            throw e;
        }
    }

由于代码有点长,按照惯例,我们只关注有用的部分.在上面代码中,我发现了一个setView()的函数,相信这个函数就是我们想要的.那就看下这部分的代码(从我在注释中标注的代码开始).代码中创建了一个名为root的ViewRootImpl对象并调用了root.setView().既然调用了函数,那按照我的风格怎么都要进去看看,万一有意外收获呢.
下面就是ViewRootImpl的setView()的代码(提示:下面代码可以跳过):

    /**
     * We have one child
     */
    public void setView(View view, WindowManager.LayoutParams attrs, View panelParentView) {
        synchronized (this) {
            if (mView == null) {
                mView = view;

                mAttachInfo.mDisplayState = mDisplay.getState();
                mDisplayManager.registerDisplayListener(mDisplayListener, mHandler);

                mViewLayoutDirectionInitial = mView.getRawLayoutDirection();
                mFallbackEventHandler.setView(view);
                mWindowAttributes.copyFrom(attrs);
                if (mWindowAttributes.packageName == null) {
                    mWindowAttributes.packageName = mBasePackageName;
                }
                attrs = mWindowAttributes;
                // Keep track of the actual window flags supplied by the client.
                mClientWindowLayoutFlags = attrs.flags;

                setAccessibilityFocus(null, null);

                if (view instanceof RootViewSurfaceTaker) {
                    mSurfaceHolderCallback =
                            ((RootViewSurfaceTaker)view).willYouTakeTheSurface();
                    if (mSurfaceHolderCallback != null) {
                        mSurfaceHolder = new TakenSurfaceHolder();
                        mSurfaceHolder.setFormat(PixelFormat.UNKNOWN);
                    }
                }

                // Compute surface insets required to draw at specified Z value.
                // TODO: Use real shadow insets for a constant max Z.
                if (!attrs.hasManualSurfaceInsets) {
                    final int surfaceInset = (int) Math.ceil(view.getZ() * 2);
                    attrs.surfaceInsets.set(surfaceInset, surfaceInset, surfaceInset, surfaceInset);
                }

                CompatibilityInfo compatibilityInfo = mDisplayAdjustments.getCompatibilityInfo();
                mTranslator = compatibilityInfo.getTranslator();

                // If the application owns the surface, don't enable hardware acceleration
                if (mSurfaceHolder == null) {
                    enableHardwareAcceleration(attrs);
                }

                boolean restore = false;
                if (mTranslator != null) {
                    mSurface.setCompatibilityTranslator(mTranslator);
                    restore = true;
                    attrs.backup();
                    mTranslator.translateWindowLayout(attrs);
                }
                if (DEBUG_LAYOUT) Log.d(TAG, "WindowLayout in setView:" + attrs);

                if (!compatibilityInfo.supportsScreen()) {
                    attrs.privateFlags |= WindowManager.LayoutParams.PRIVATE_FLAG_COMPATIBLE_WINDOW;
                    mLastInCompatMode = true;
                }

                mSoftInputMode = attrs.softInputMode;
                mWindowAttributesChanged = true;
                mWindowAttributesChangesFlag = WindowManager.LayoutParams.EVERYTHING_CHANGED;
                mAttachInfo.mRootView = view;
                mAttachInfo.mScalingRequired = mTranslator != null;
                mAttachInfo.mApplicationScale =
                        mTranslator == null ? 1.0f : mTranslator.applicationScale;
                if (panelParentView != null) {
                    mAttachInfo.mPanelParentWindowToken
                            = panelParentView.getApplicationWindowToken();
                }
                mAdded = true;
                int res; /* = WindowManagerImpl.ADD_OKAY; */

                // Schedule the first layout -before- adding to the window
                // manager, to make sure we do the relayout before receiving
                // any other events from the system.
                
                // 标注 , 我就是通过光明的入口
                requestLayout();
                
                if ((mWindowAttributes.inputFeatures
                        & WindowManager.LayoutParams.INPUT_FEATURE_NO_INPUT_CHANNEL) == 0) {
                    mInputChannel = new InputChannel();
                }
                try {
                    mOrigWindowType = mWindowAttributes.type;
                    mAttachInfo.mRecomputeGlobalAttributes = true;
                    collectViewAttributes();
                    res = mWindowSession.addToDisplay(mWindow, mSeq, mWindowAttributes,
                            getHostVisibility(), mDisplay.getDisplayId(),
                            mAttachInfo.mContentInsets, mAttachInfo.mStableInsets,
                            mAttachInfo.mOutsets, mInputChannel);
                } catch (RemoteException e) {
                    mAdded = false;
                    mView = null;
                    mAttachInfo.mRootView = null;
                    mInputChannel = null;
                    mFallbackEventHandler.setView(null);
                    unscheduleTraversals();
                    setAccessibilityFocus(null, null);
                    throw new RuntimeException("Adding window failed", e);
                } finally {
                    if (restore) {
                        attrs.restore();
                    }
                }

                if (mTranslator != null) {
                    mTranslator.translateRectInScreenToAppWindow(mAttachInfo.mContentInsets);
                }
                mPendingOverscanInsets.set(0, 0, 0, 0);
                mPendingContentInsets.set(mAttachInfo.mContentInsets);
                mPendingStableInsets.set(mAttachInfo.mStableInsets);
                mPendingVisibleInsets.set(0, 0, 0, 0);
                if (DEBUG_LAYOUT) Log.v(TAG, "Added window " + mWindow);
                if (res < WindowManagerGlobal.ADD_OKAY) {
                    mAttachInfo.mRootView = null;
                    mAdded = false;
                    mFallbackEventHandler.setView(null);
                    unscheduleTraversals();
                    setAccessibilityFocus(null, null);
                    switch (res) {
                        case WindowManagerGlobal.ADD_BAD_APP_TOKEN:
                        case WindowManagerGlobal.ADD_BAD_SUBWINDOW_TOKEN:
                            throw new WindowManager.BadTokenException(
                                    "Unable to add window -- token " + attrs.token
                                    + " is not valid; is your activity running?");
                        case WindowManagerGlobal.ADD_NOT_APP_TOKEN:
                            throw new WindowManager.BadTokenException(
                                    "Unable to add window -- token " + attrs.token
                                    + " is not for an application");
                        case WindowManagerGlobal.ADD_APP_EXITING:
                            throw new WindowManager.BadTokenException(
                                    "Unable to add window -- app for token " + attrs.token
                                    + " is exiting");
                        case WindowManagerGlobal.ADD_DUPLICATE_ADD:
                            throw new WindowManager.BadTokenException(
                                    "Unable to add window -- window " + mWindow
                                    + " has already been added");
                        case WindowManagerGlobal.ADD_STARTING_NOT_NEEDED:
                            // Silently ignore -- we would have just removed it
                            // right away, anyway.
                            return;
                        case WindowManagerGlobal.ADD_MULTIPLE_SINGLETON:
                            throw new WindowManager.BadTokenException(
                                    "Unable to add window " + mWindow +
                                    " -- another window of this type already exists");
                        case WindowManagerGlobal.ADD_PERMISSION_DENIED:
                            throw new WindowManager.BadTokenException(
                                    "Unable to add window " + mWindow +
                                    " -- permission denied for this window type");
                        case WindowManagerGlobal.ADD_INVALID_DISPLAY:
                            throw new WindowManager.InvalidDisplayException(
                                    "Unable to add window " + mWindow +
                                    " -- the specified display can not be found");
                        case WindowManagerGlobal.ADD_INVALID_TYPE:
                            throw new WindowManager.InvalidDisplayException(
                                    "Unable to add window " + mWindow
                                    + " -- the specified window type is not valid");
                    }
                    throw new RuntimeException(
                            "Unable to add window -- unknown error code " + res);
                }

                if (view instanceof RootViewSurfaceTaker) {
                    mInputQueueCallback =
                        ((RootViewSurfaceTaker)view).willYouTakeTheInputQueue();
                }
                if (mInputChannel != null) {
                    if (mInputQueueCallback != null) {
                        mInputQueue = new InputQueue();
                        mInputQueueCallback.onInputQueueCreated(mInputQueue);
                    }
                    mInputEventReceiver = new WindowInputEventReceiver(mInputChannel,
                            Looper.myLooper());
                }

                view.assignParent(this);
                mAddedTouchMode = (res & WindowManagerGlobal.ADD_FLAG_IN_TOUCH_MODE) != 0;
                mAppVisible = (res & WindowManagerGlobal.ADD_FLAG_APP_VISIBLE) != 0;

                if (mAccessibilityManager.isEnabled()) {
                    mAccessibilityInteractionConnectionManager.ensureConnection();
                }

                if (view.getImportantForAccessibility() == View.IMPORTANT_FOR_ACCESSIBILITY_AUTO) {
                    view.setImportantForAccessibility(View.IMPORTANT_FOR_ACCESSIBILITY_YES);
                }

                // Set up the input pipeline.
                CharSequence counterSuffix = attrs.getTitle();
                mSyntheticInputStage = new SyntheticInputStage();
                InputStage viewPostImeStage = new ViewPostImeInputStage(mSyntheticInputStage);
                InputStage nativePostImeStage = new NativePostImeInputStage(viewPostImeStage,
                        "aq:native-post-ime:" + counterSuffix);
                InputStage earlyPostImeStage = new EarlyPostImeInputStage(nativePostImeStage);
                InputStage imeStage = new ImeInputStage(earlyPostImeStage,
                        "aq:ime:" + counterSuffix);
                InputStage viewPreImeStage = new ViewPreImeInputStage(imeStage);
                InputStage nativePreImeStage = new NativePreImeInputStage(viewPreImeStage,
                        "aq:native-pre-ime:" + counterSuffix);

                mFirstInputStage = nativePreImeStage;
                mFirstPostImeInputStage = earlyPostImeStage;
                mPendingInputEventQueueLengthCounterName = "aq:pending:" + counterSuffix;
            }
        }
    }

Shit!(尼玛),怎么感觉越陷越深.如果有这种感觉的同学那就对了,正所谓不如虎穴,焉得虎子.坚持一下,光明就在前方.
在上面的一大串代码中,我发现了一句非常熟悉的代码requestLayout();(我已在上面的代码进行了标注),这不是View在需要重新布局的时候调用的函数吗,怎么会在这里出现.正所谓Everything for a reason,我毫不犹豫的点了进去.(各位同学肯定在想:还有完没完...我只能说:相信我就跟我走下去,你会有所发现的).

    @Override
    public void requestLayout() {
        if (!mHandlingLayoutInLayoutRequest) {
            checkThread();
            mLayoutRequested = true;
            scheduleTraversals();
        }
    }

这是停不下来的感觉啊,接着轮到scheduleTraversals(),我把其中相关的都贴出来了.

final class TraversalRunnable implements Runnable {
        @Override
        public void run() {
            doTraversal();
        }
    }
final TraversalRunnable mTraversalRunnable = new TraversalRunnable();
void scheduleTraversals() {
        if (!mTraversalScheduled) {
            mTraversalScheduled = true;
            mTraversalBarrier = mHandler.getLooper().getQueue().postSyncBarrier();
            mChoreographer.postCallback(
                    Choreographer.CALLBACK_TRAVERSAL, mTraversalRunnable, null);
            if (!mUnbufferedInputDispatch) {
                scheduleConsumeBatchedInput();
            }
            notifyRendererOfFramePending();
            pokeDrawLockIfNeeded();
        }
    }

这里的scheduleTraversals()设置了回调mTraversalRunnable,而在回调里调用了doTraversal().

    void doTraversal() {
        if (mTraversalScheduled) {
            mTraversalScheduled = false;
            mHandler.getLooper().getQueue().removeSyncBarrier(mTraversalBarrier);

            if (mProfile) {
                Debug.startMethodTracing("ViewAncestor");
            }

            performTraversals();

            if (mProfile) {
                Debug.stopMethodTracing();
                mProfile = false;
            }
        }
    }

接着来到最终的一个函数了,就是上面在doTraversal()里调用的performTraversals().这个函数的代码可不是一般的长,所以我也不再挑战大家的极限了,我就直接给出performTraversals()函数里的3个关键的语句.

private void performTraversals() {
    .......
    // 测量过程
    performMeasure();
    .......
    // 布局过程
    performLayout();
    .......
    // 绘制过程
    performDraw();
    .......
}

是不是有点熟悉的感觉,这就是View的3大流程,measure,layout,draw,原来View的3大流程是在这里执行的.到这里我们已经简略地走完了View的工作流程了.

总结

像上次一样,最后还是用张图总结本篇的内容,这样会使我们头脑清晰一点.

流程