python移植
host:
./configure
make python Parser/pgen
mv python hostpython
mv Parser/pgen Parser/hostpgen
make distclean
optional:
echo ac_cv_file__dev_ptmx=yes > config.site
echo ac_cv_file__dev_ptc=yes >> config.site
export CONFIG_SITE=config.site
configure arm:
CC=arm-linux-gnueabihf-gcc CXX=arm-linux-gnueabihf-g++ AR=arm-linux-gnueabihf-ar RANLIB=arm-linux-gnueabihf-ranlib
./configure --host=arm-linux --build=x86_64-linux-gnu --prefix=/home/jason/lib/arm-python --disable-ipv6 --enable-shared
build:
chmod 777 ./setup.py
make HOSTPYTHON=./hostpython HOSTPGEN=./Parser/hostpgen BLDSHARED="arm-linux-gnueabihf-gcc -shared" CROSS_COMPILE=arm-linux-gnueabihf- CROSS_COMPILE_TARGET=yes HOSTARCH=arm-linux BUILDARCH=x86_64-linux-gnu
make install HOSTPYTHON=./hostpython BLDSHARED="arm-linux-gnueabihf-gcc -shared" CROSS_COMPILE=arm-linux-gnueabihf- CROSS_COMPILE_TARGET=yes prefix=/home/jason/lib/arm-python
Note
- 编译好的目录可由其他库引用,具体如下：
- include paths: ~/lib/arm-python/include
- library paths: ~/lib/arm-python/lib
boost_python移植
- 备份宿主机的/usr/include/python2.7文件夹
- 将移植好的arm-python中的头文件拷贝到/usr/include/python2.7
- ./bootstrap.sh
- 修改生成的project-config.jam文件，具体可以参照
修改：（共五处）
- using gcc : arm : arm-none-linux-gnueabi-gcc ;
- option.set prefix :(交叉编译器所在位置);
- option.set exec-prefix :(交叉编译器所在位置)/bin ;
- option.set libdir :(交叉编译器所在位置)/lib ;
- option.set includedir :(交叉编译器所在位置)/include ;
- ./bjam stage
- 还原宿主机的python2.7头文件夹
- 编译好的目录可由其他库引用,具体如下：
- include paths: ~/lib/boost/boost
- library paths: ~/lib/boost/stage/lib
libxml2移植
- mkdir build
- ./configure CC=/usr/bin/arm-linux-gnueabihf-gcc --host=arm-linux --prefix=/home/jason/lib/libxml2/build/ --with-python=/home/jason/lib/libxml2/python
CFLAGS="-I/home/jason/lib/arm-python/include/python2.7/" LDFLAGS="-L/home/jason/lib/arm-python/lib" - make -j8
- make install
- 编译好的目录可由其他库引用,具体如下：
- include paths: ~/lib/libxml2/build/include
- library paths: ~/lib/libxml2/build/lib
